{
    "componentChunkName": "component---src-gatsby-entities-sub-topic-tsx",
    "path": "/sub-topics/gravity-separation-characterisation",
    "result": {"data":{"platform":{"subTopic":{"__typename":"Platform_SubTopic","_schema":{"label":"Sub Topic","pluralLabel":"Sub Topics"},"openGraph":{"title":"Gravity Separation Characterisation","description":{"text":"Jigging[](#Jigging)\n===================\n\nIntroduction[](#Introduction)\n-----------------------------\n\nOne of the most widely used gravity-separation technologies are [JIG](https://en.wikipedia.org/wiki/Jig_concentrators)  <b title=\"A plant where ore is separated into concentrates and..."},"image":null},"id":"65d2edd7ebf7bb9388ffb16c","slug":"gravity-separation-characterisation","name":"Gravity Separation Characterisation","path":"/sub-topics/gravity-separation-characterisation","outlineNumber":"2.2.7","color":{"__typename":"Platform_Color","id":"65d2ed7febf7bb9388ffab3a","slug":"core-12","name":"Core 12","value":"#3b6673","darkValue":"#2b4b56","veryDarkValue":"#1c3239"},"intro":{"id":"65d2edd7ebf7bb9388ffb16c_intro","text":"Jigging[](#Jigging)\n===================\n\nIntroduction[](#Introduction)\n-----------------------------\n\nOne of the most widely used gravity-separation technologies are [JIG](https://en.wikipedia.org/wiki/Jig_concentrators)  <b title=\"A plant where ore is separated into concentrates and tails.\">concentrator</b>s.  Jigs are very cheap to operate, easy to run, and able to cope with variable grades and flow rates.  "},"description":{"id":"65d2edd7ebf7bb9388ffb16c_description","text":"Jigs are mineral <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b> devices that separate value <b title=\"Individual rocks within discrete size fractions.\">particles </b> from [gangue](https://en.wikipedia.org/wiki/Gangue)  <b title=\"Individual rocks within discrete size fractions.\">particles </b> based on their relative density, as well as [particle size](https://en.wikipedia.org/wiki/Particle_size), and shape. There are many variations of [JIG](https://en.wikipedia.org/wiki/Jig_concentrators)  <b title=\"A plant where ore is separated into concentrates and tails.\">concentrator</b> design however the basic principles are constant: <b title=\"Individual rocks within discrete size fractions.\">particles </b> are introduced to the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) bed (usually a screen) where they are thrust upward by a pulsing water column or body, resulting in the <b title=\"Individual rocks within discrete size fractions.\">particles </b> being suspended within the water. As the pulse dissipates, the water level returns to its lower starting position and the <b title=\"Individual rocks within discrete size fractions.\">particles </b> once again settle on the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) bed. As the <b title=\"Individual rocks within discrete size fractions.\">particles </b> are exposed to gravitational energy whilst in suspension within the water, those with a higher [specific gravity](https://en.wikipedia.org/wiki/Relative_density) (SG) / density settle faster than those with a lower SG, resulting in a concentration of material with higher density at the bottom of the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) bed for separation as screen <b title=\"Material below an specified size (generally used to define material that falls through a screen deck).\">undersize</b>.\n\n [![GravJigSchematics1](https://res.cloudinary.com/shapeable/image/upload/v1687303428/wikiore/75.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303428/wikiore/75.jpg) \n\nA basis placer [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) is shown. It consists of a <b title=\"Material entering a predetermined system.\">feed</b> [hopper](https://en.wikipedia.org/wiki/Hopper_%28particulate_collection_container%29) and conveyor (sometimes not included), a [trommel](https://en.wikipedia.org/wiki/Trommel_screen) to remove large <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> rocks, the jig, a water <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>, and a tails handling method.\n\n [![GravBasicJigDevice](https://res.cloudinary.com/shapeable/image/upload/v1687303431/wikiore/76.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303431/wikiore/76.jpg) \n\nJigs use a large amount of water so reclamation of water with recycling is standard practice. Clean water is not necessary as clay and fully suspended slimes do not appreciably affect results up to an apparent density of 1.05 (SMART DOG MINING, 2013).  \n\nAfter WWII [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) technology fell out of favour for metallic mining <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b>, but not gemstones, due to the emergence of [flotation](https://en.wikipedia.org/wiki/Froth_flotation) techniques, which were a simple process that achieve both a high recovery and metal content upgrade ratio. The re-emergence of interest over the last 50 years in the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) technologies occurred around the 1960’s in places like Malaysia, the Yukon, and Brazil due to engineering of highly efficient jigs (Wyatt Yeager, 2015).  \n\nNew engineering [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) design seeks to lower water consumption, high unit <b title=\"Metric for overall tonnage moving through a system within a  specified time.\">throughput</b>, close control of <b title=\"General term for equipment performance parameters.\">operating conditions</b>, low power requirement, low installation cost, high security, low capital and operating cost benefits, and requires minimal infrastructure or logistical support. Highly efficient [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) designs included the creation of the circular or round [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) employed in the Malaysian tin fields. The new design in efficient jig’s significantly increased recovery and profit in tin alluvial <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b> (Wyatt Yeager, 2015).\n\n  \nNew [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) design includes the Australian developed [Gekko](https://www.gekkos.com/) Systems Pty Ltd ([Gekko](https://www.gekkos.com/)) [InLine](InLine) Pressure [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) (IPJ), identified in cross section by Figure 1‑5 and Figure 1‑6. The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is a[JIG](https://en.wikipedia.org/wiki/Jig_concentrators) with unique features which include a fully encapsulated and pressurised particle separation chamber, and a moveable screen. The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is a continuous [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) device originally developed in Australia for recovery of placer gold and commercialised in 1996. In the late 1990’s research into the use of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) in diamonds was commenced.  The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) has a circular bed of solid material that is oscillated to enable the settling of heavier material.  As well the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) has unique design and operating aspects which allow the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) to be completely filled with [slurry](https://en.wikipedia.org/wiki/Slurry) and water and as a result, [slurry](https://en.wikipedia.org/wiki/Slurry) velocity is slowed and water surface tension eliminated improving recovery potential (R Heins, R Spargo, and A [McCallum](McCallum), 2003) by improving dynamics within the separation layer (Gray, 1997). The[IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) requires as little as 10% of the water consumption of traditional jigs (R Heins, R Spargo, and A McCallum, 2003). The [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) screen typically has 1mm to 28mm spacing (World Placer Journal – 2007, Volume 7 and S Gray and T Hughes, 2008).  Inside the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) hydrophobic issues associated with conventional jigging are eliminated as the[IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is kept hydrostatically full. The [slurry](https://en.wikipedia.org/wiki/Slurry) within the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) also acts as a pseudo dense medium above the jigging bed assisting with the separation.\n\n [![GravIpjCrossSection](https://res.cloudinary.com/shapeable/image/upload/v1687303432/wikiore/77.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303432/wikiore/77.jpg) \n\nGravity concentration utilising jigs can operate over a very wide size range. Jigs are a suitable option from 100 µm up to 30 mm, however optimally operate within +200 µm to 10 mm. This wide range is also relatively low on the ‘liberation energy’ range (2-10 <b title=\"KiloWattHours per tonne\">kWh/t</b> )”\\_\\_ (N J Grigg & G J Delemontex, 2014).  \n“Test work carried out during full-scale operation of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) has shown the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) can recover diamonds down to 0.5 mm, [sulphides](https://en.wikipedia.org/wiki/Sulfide_mineral) down to 0.3mm and gold down to 0.1mm” (S Gray and T Hughes, 2008).\n\nMinerals Treated by IPJ[](#Minerals_Treated_by_IPJ)\n---------------------------------------------------\n\nThe main industrial applications of [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) with <b title=\"Subjective term for the larger sized component of feed\">coarse</b> material <b title=\"Material entering a predetermined system.\">feed</b>s were initially more popular on free gold recovery in the typical range described by Figure 2‑1, and diamonds industries. Today’s [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) technology is not limited to just these minerals; [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) can be used as a pre-concentration step for a variety of minerals, including; [sulphides](https://en.wikipedia.org/wiki/Sulfide_mineral), native copper, native silver, tin/tantalum, and garnet. Installations are also planned for coal, lead remediation, magnetite, mineral sands, and iron ore recovery ([Gekko](https://www.gekkos.com/) Systems, 2006 and Gray and Hughes, 2008).\n\nPotential Business Value Optimisation[](#Potential_Business_Value_Optimisation)\n-------------------------------------------------------------------------------\n\nOptimizing the value on new projects or existing operations through [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) pre-concentration includes balancing the correct combination of variables in the business value model. The value model is dynamic in that as the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) <b title=\"Material void of any valuable elements.\">barren</b> material rejection rate changes, the subsequent effect of the change is accounted for in terms of:\n\n*   Jig pre-concentration step <b title=\"Material entering a predetermined system.\">feed</b> Cut-Off\n*   Jig plant and process plant <b title=\"Material entering a predetermined system.\">feed</b> tonnage rates\n*   Plant operating and <b title=\"Expected upfront costs of a given scenario or plan.\">capital costs</b>\n*   Mining <b title=\"Expenditure incurred through normal operation.\">operating costs</b>\n*   Jig recovery (operation specific)\n*   Jig efficiency in different mining environments\n*   Overall plant recovery and <b title=\"Product generally produced by metal ore mines.\">concentrate</b> grade based on plant <b title=\"Material entering a predetermined system.\">feed</b> grade improvement\n*   Bond power (milling power) and pumping power reduction\n*   Water usage\n*   Smelting costs\n\n  \nEffective [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) pre-concentration can increase the overall <b title=\"Metric for overall tonnage moving through a system within a  specified time.\">throughput</b> of an existing plant without installing extra milling capacity or alternatively for a [Greenfield](https://en.wikipedia.org/wiki/Greenfield_land) site the milling <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> and subsequent downstream process can be reduced in size, dramatically reducing the <b title=\"Expected upfront costs of a given scenario or plan.\">capital costs</b>. As an example, the average capital intensity is above $10,000/t (Mills, 2014) to build the capacity to produce a tonne of copper, on an annualized basis.  \n\nJig pre-concentration can reduce the <b title=\"Material entering a predetermined system.\">feed</b> tonnage into subsequent downstream processes potentially reducing higher operational expenditure (Opex) in processes through reducing the <b title=\"Material entering a predetermined system.\">feed</b> tonnage to the processes following pre-concentration.  As examples;\n\n*   the average combined SAG and [ball mill](https://en.wikipedia.org/wiki/Ball_mill) <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>, (assuming 15kW/ht @ $0.10kW/hr, media 1k<b title=\"Grams per tonne\">g/t</b> @ $1.20 and liners $0.25/t) the cost is ~US$2.95/tonne (N J Grigg\\* & G J Delemontex, 2014), and\n*   the [flotation](https://en.wikipedia.org/wiki/Froth_flotation) cost range between UD$1-2/tonne, (2000tpd @ 2% sulphide).\n\nOre Gravity Seperation Opportunity Analysis[](#Ore_Gravity_Seperation_Opportunity_Analysis)\n-------------------------------------------------------------------------------------------\n\nIn [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) the bigger the density difference between the valuable mineral and the <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> mineral the easier separation should be.  As a general rule of thumb, the <b title=\"Materials response to a given preconcentration technology.\">amenability</b> to gravity concentration is indicated by the “ <b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> ”, C, defined (Taggart 1951) as a function of the [specific gravity](https://en.wikipedia.org/wiki/Relative_density) of the valuable mineral, <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> mineral and the fluid medium in which [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) takes place, and is shown by:\n\n [![EquationGravitySeparationTaggart](https://res.cloudinary.com/shapeable/image/upload/v1687303434/wikiore/58.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303434/wikiore/58.jpg) \n\nWhere:\n\n*   ρ h = is the S.G. of the heavy component\n*   ρ l = is the S.G. of the [gangue](https://en.wikipedia.org/wiki/Gangue) (light) component\n*   ρ ƒ = is the S.G. of the fluid medium (or separation fluid)\n\nIf **C** is greater than 2.5, the separation may be achieved with relative ease; separation is not commercially feasible for values below 1.25. The higher the gravity differential ratio, described by C, the easier the [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation). Settling velocity of <b title=\"Individual rocks within discrete size fractions.\">particles </b> depends not only on density but also on [particle size](https://en.wikipedia.org/wiki/Particle_size) to achieve effective mineral separation, it is important to prepare narrowly sized <b title=\"Material entering a predetermined system.\">feed</b>s. If the <b title=\"Material entering a predetermined system.\">feed</b> has a wide size distribution, the smaller heavy mineral <b title=\"Individual rocks within discrete size fractions.\">particles </b> will report to the same exit as the larger light <b title=\"Individual rocks within discrete size fractions.\">particles </b> because their settling velocities are similar. Table 14.4-1 describes the effectiveness of [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) for various [particle size](https://en.wikipedia.org/wiki/Particle_size)s relative to the particle material <b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> value.\n\n [![GravitySeparationAmenabilityTable](https://res.cloudinary.com/shapeable/image/upload/v1687303435/wikiore/59.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303435/wikiore/59.jpg) \n\nExample <b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> values calculated from mineral density data and gravity separated in a water medium result in the following values of C.\n\n| **Mineral**   | **ρh**   | **ρl**   |  **~~black:pf**black\">C     |\n|:---------:|:----:|:----:|:-----:|\n| Gold      | 19.3 | 2.7  | 10.76 |\n| Diamond   | 3.5  | 2.65 | 1.52  |\n| Ilmenite  | 4.7  | 2.7  | 2.18  |\n\nAll three minerals shown produce C values which indicate potential for [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation). Gold has the highest C value of 10.76 and the best potential for value mineral and <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> mineral separation and Diamond just above the commercially feasible C value of 1.25. In [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) replacing a water medium with a heavy media achieves a higher density, as well as density control. <b title=\"Dense Media Separation\">DMS</b> technique dense medium impacts the <b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> by increasing the C value considerably, thereby supporting a more efficient mineral separation.  Limitations in using the <b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> value in <b title=\"Dense Media Separation\">DMS</b> process application design include;\n\n*   The C concept takes no account of the time factor which enters increasingly as the [particle size](https://en.wikipedia.org/wiki/Particle_size) diminishes\n*   The C concept takes no account in <b title=\"Dense Media Separation\">DMS</b> of the contributory effects of medium viscosity and [particle size](https://en.wikipedia.org/wiki/Particle_size) in mineral separation efficiency. (Higher viscosity decreases <b title=\"Dense Media Separation\">DMS</b> device underflow pulp density and separation density, and reduces separation efficiencies for fine particles)\n\nJIG Performance Analysis[](#JIG_Performance_Analysis)\n-----------------------------------------------------\n\nJigs, are simple to operate, however can sometimes suffer from inefficient <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b>s.  \n\nThe efficiency of [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) separation depends on the ability to separate material on a combination of size, effected by bed fluidising velocity, and S.G. close to that of the <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b> medium. This can be represented by a Tromp or <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b>, which relates to the partition coefficient (i.e. the percentage of <b title=\"Material entering a predetermined system.\">feed</b> material of a particular S.G. which reports to the sinks (or floats) product plotted against S.G.). The mass split at different densities is generated from heavy liquid separation (HLS) test work.  \n\nThe <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b> identifies key performance factors, including; the separation [specific gravity](https://en.wikipedia.org/wiki/Relative_density) (SG) cutpoint, and Ecart probable (Ep). Ep is used to describe misplaced material or sharpness of separation (slope of the curve) as a probable Error number. A <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b> shows the amount of material, with a particular quality, that appeared in the product (or reject) compared to how much of that same material was in the <b title=\"Material entering a predetermined system.\">feed</b>. These material qualities may be based on [particle size](https://en.wikipedia.org/wiki/Particle_size), density or other material variables. {DIV}  \n\nIn Figure 5‑1 if the <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b> slope were vertical then perfect separation would be achieved and the Ep would be 0. As the curve becomes more horizontal, then separation efficiency is worse and the Ep value increases. From this curve can also be determined the amount of misplaced material, that is, the amount of material that ideally should have been in product and ended up and reject and vice versa.\n\n [![GravJigPerformanceGraph](https://res.cloudinary.com/shapeable/image/upload/v1687303437/wikiore/79.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303437/wikiore/79.jpg) \n\nA generic comparison for <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b> efficiency performance between the Dense Media Separator (DMS) technique and [Gekko](https://www.gekkos.com/) In-line Pressure [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) (IPJ) is shown in Figure 5‑2.  This comparison assesses the process accuracy in separating black:the valuable mineral and the <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> mineral at a [SG](https://en.wikipedia.org/wiki/Relative_density) cutpoint and Ep, with both values read once the <b title=\"A curve indicating percentages contained in one product of separation (e.g. the reject) for each specific gravity (or size) fraction.\">Partition curve</b> has been constructed for all density or size intervals.\n\n [![GravIpjPerformanceGraph](https://res.cloudinary.com/shapeable/image/upload/v1687303438/wikiore/78.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303438/wikiore/78.jpg) \n\nFigure 5‑2 Partition (Ep) curve indicates that both the <b title=\"Dense Media Separation\">DMS</b> technology and [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) will recover 100% of 3.2SG and higher <b title=\"Individual rocks within discrete size fractions.\">particles </b> to sinks. Further, the chart also demonstrates that the[IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) recovers a higher mass, at a significantly less accurate cut point than the DMS. The volume of material reporting to <b title=\"Product generally produced by metal ore mines.\">concentrate</b> (sinks) for the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is shown by the area under the Ep curve coloured in yellow and grey. The volume of material taken to sinks by the <b title=\"Dense Media Separation\">DMS</b> is shaded in grey only and the volume of material taken to sinks by the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is shaded in yellow and grey.  \nThe laboratory [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is testwork program is typically undertaken by using a Viking Cone test protocol (N J Grigg & G J Delemontex, 2014)  \nFrom [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) testwork analysis the general mineral [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) capacity at S.G. separation points is described in Table 5‑1.[JIG](https://en.wikipedia.org/wiki/Jig_concentrators) configuration and [particle size](https://en.wikipedia.org/wiki/Particle_size) will have some impact but an average of 1.8 Tons/hr/ft 2 of [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) area is common (SMART DOG MINING, 2013).\n\n| Average <b title=\"Material entering a predetermined system.\">feed</b> Sp Gr | t/Hr per ft2 Low End | t/Hr per ft2 Average | t/Hr per ft2 High End |\n|:------------------:|:---------------------:|:--------------------:|:---------------------:|\n|        2.35        |          1.5          |         1.5          |          1.6          |\n|        2.5         |          1.6          |         1.6          |          1.7          |\n|        2.75        |          1.7          |         1.8          |          1.9          |\n|         3          |          1.9          |         2.0          |          2.0          |\n|        3.5         |          2.2          |         2.3          |          2.4          |\n\nThe areas of optimisation considered to be of primary importance are the pulse rate, pulse amplitude and pulse shape (Nesbitt et al, 2005). These are parameters known to be important to conventional jigs (Wills, 1997), noted to be important in a recent theoretical study of the In-Line Pressure [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) (Nesbitt et al, 2005). It is considered that there is considerable room for improvement for both D50 control and separation sharpness through optimisation of the abovementioned three parameters.  \n \n\nIPJ Equipment Selection[](#IPJ_Equipment_Selection)\n---------------------------------------------------\n\n  \n[Beneficiation](https://en.wikipedia.org/wiki/Beneficiation) plant <b title=\"A specific design within IES or a given circuit configuration.\">flowsheet</b> development chooses between a sequence of operation units, Figure 6‑1, bases on operational effectiveness in treating particle sizing ranges, and cleaning. As the <b title=\"Post blast material in the load/haul cycle.\">run-of-mine</b>  (ROM) [particle size](https://en.wikipedia.org/wiki/Particle_size) decreases, cleanability generally enhances because of increase mineral value liberation; however, the separation efficiency provided by the fine and ultra–fine cleaning separators maybe inferior to those achieved by the [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) processes used on applicable <b title=\"Subjective term for the larger sized component of feed\">coarse</b> and intermediate minerals, mainly due to the breakage energy advantage, Figure 6‑2, when the process can be performed at a <b title=\"Subjective term for the larger sized component of feed\">coarse</b> liberation size.  \nWith regards to predicting the [metallurgical](https://en.wikipedia.org/wiki/Metallurgy) performance of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) facility analysis is typically conducted using an Ep efficiency factor of between 0.125 and 0.05.  However, it is unlikely that such an efficient process separation will be achievable and / or sustainable given the complex variables in operating the IPJ, and sensitivity to the <b title=\"Material entering a predetermined system.\">feed</b> <b title=\"Classified material based on specific size constraints (i.e. two specific sizes).\">size fraction</b> of the material. Historically, this type of unit can be expected to have an **Ep efficiency factor of between 0.15 to 0.20**, which would result in a far less efficient separation process (OMC – Orway Mineral Consultants).  \n \n\n [![GravFeedParticleSizes](https://res.cloudinary.com/shapeable/image/upload/v1687303440/wikiore/82.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303440/wikiore/82.jpg) \n\n [![GravComminutionEnergyCurve](https://res.cloudinary.com/shapeable/image/upload/v1687303442/wikiore/80.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303442/wikiore/80.jpg) \n\nPotential benefits attributed to [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) application include;\n\n*   recovery of heavies from a [slurry](https://en.wikipedia.org/wiki/Slurry) stream into a variable yield of between 0.5 to 50% into a value particle enriched pre<b title=\"Product generally produced by metal ore mines.\">concentrate</b> and a final <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> product within a rougher and scavenger configuration,\n*   reject a <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> product at a <b title=\"Subjective term for the larger sized component of feed\">coarse</b> r size, thereby saving [grinding](https://en.wikipedia.org/wiki/Mill_%28grinding%29) costs,\n*   achieve separation at a low operating cost with low maintenance costs,\n*   may have relatively sharp separations, under certain <b title=\"General term for equipment performance parameters.\">operating conditions</b>,\n*   operate continuously,\n*   tolerate <b title=\"Material entering a predetermined system.\">feed</b> with wide size distributions,\n*   produce a consistent product for further processing,\n*   Increases the grade to <b title=\"All stages contained in a sequence after an arbitrary point.\">downstream processing</b> options,\n*   reduces reagent consumption and costs for further processing, and\n*   improves start-up cash flows by upgrading ore to prove faster payback times.\n\nPotential disadvantages attributed to [gravity separation](https://en.wikipedia.org/wiki/Gravity_separation) application include;\n\n*   increased overall <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> complexity,\n*   low effective separation given the large number of operating variables that need be adjusted,\n*   Increases risk of misreporting of locked mineral value <b title=\"Individual rocks within discrete size fractions.\">particles </b> with [gangue](https://en.wikipedia.org/wiki/Gangue)  <b title=\"Individual rocks within discrete size fractions.\">particles </b> to waste,\n*   <b title=\"Subjective term for the larger sized component of feed\">coarse</b> particle sampling difficulties leading to increase potential error in reported plant [metallurgical](https://en.wikipedia.org/wiki/Metallurgy) balance, and\n\nwill include significant infrastructure related to material preparation, and product dewatering, as well as the significant pumping system requirements.\n\nJIG/IPJ Operating Performance and Circuit Layouts[](#JIG_IPJ_Operating_Performance_and_Circuit_Layouts)\n-------------------------------------------------------------------------------------------------------\n\n\"The fundamental principles jigging are essentially the same for all jigs, the basic differences between the various types of jigs are a matter of practical engineering to optimize the operating performance, materials handling, maintenance and control” (SMART DOG MINING, 2013)  \nThe [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) combines a circular bed with a moveable sieve action. The screen is pulsed vertically by a hydraulically driven shaft of which the length and speed of the stroke are fully adjustable\"\" (T Hughes, K Donaldson and B Murphy, 2010).\"  \n“<b title=\"Material entering a predetermined system.\">feed</b> is pumped through the <b title=\"Material entering a predetermined system.\">feed</b> pipe into the distributor where its direction is reversed and the velocity drops. The [slurry](https://en.wikipedia.org/wiki/Slurry) then flows out over the top of the distributor and radiates out across the bed. The vessel is completely filled with water and [slurry](https://en.wikipedia.org/wiki/Slurry), creating a semi-static column through which the bed is mechanically pulsed. During the dilation phase of the stroke, separation occurs owing to the relative density of the different materials and [segregation](https://en.wikipedia.org/wiki/Particle_segregation) because of [particle size](https://en.wikipedia.org/wiki/Particle_size) and shape. During the suction phase of the stroke the <b title=\"Product generally produced by metal ore mines.\">concentrate</b> is drawn down through the <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b>, the <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b> medium can be 10mm to 30mm in diameter (A H Gray, G Delemontex, N Grigg and T Yeomans, 2008), and into the hutch. The [gangue](https://en.wikipedia.org/wiki/Gangue) is discharged to the tail board of the [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) and drops down into the void between the two cones and out through the discharge. The <b title=\"Product generally produced by metal ore mines.\">concentrate</b> passes out of the hutch continuously” (A H Gray, 1997)\n\nThe use of a moveable screen rather than a fixed screen allows for two unique functions to occur:\n\n1.  “The ability of the operator to dictate the height to which the bed will rise and fall. Each particle in the bed is raised during the suction stroke to a pre-determined level at which point the screen is rapidly accelerated downwards leaving the <b title=\"Individual rocks within discrete size fractions.\">particles </b> momentarily suspended, from this point the <b title=\"Individual rocks within discrete size fractions.\">particles </b> are free to settle at a rate commensurate with their relative density” (A H Gray, 1997).\n2.  “The <b title=\"Individual rocks within discrete size fractions.\">particles </b> are lifted to the same height during each cycle regardless of their relative density. At the top of the stroke the ‘rug is pulled out’ from underneath the particles. This ensures that the bed porosity remains even and no boil holes occur” (A H Gray, 1997).\n\nNew 500tph (4Mtpa) to 1500tph (12Mtpa) <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b> modules described by Figure 7‑1 and Figure 7‑2:, design have been proposed for base metal applications in copper, lead and zinc applications.\n\n [![GravIpjCircuits](https://res.cloudinary.com/shapeable/image/upload/v1687303443/wikiore/83.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303443/wikiore/83.jpg) \n\nEffective separation by [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) depends on a number of factors parameters to control the <b title=\"Product generally produced by metal ore mines.\">concentrate</b> characteristics, including:\n\n*   Suitable degree of liberation and intergrade deportment based on <b title=\"Classified material based on specific size constraints (i.e. two specific sizes).\">size fraction</b>s.\n*   Settling Rate of particles,this is dictated by Stoke’s Law\n*   Difference in value particle and [gangue](https://en.wikipedia.org/wiki/Gangue) particle [specific gravity](https://en.wikipedia.org/wiki/Relative_density) (SG) when compared against the choice of <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b> makeup in which they are being separated (this gives differential settling rate and has been termed the “<b title=\"Ratio between the density in a liquid of two minerals that are to be separated.\">Concentration Criterion</b> ”).\n*   Pulse Rate\n*   Stroke Length\n*   Down Stroke Speed\n*   Hutch Water Addition\n*   <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b> S.G.\n*   Air Release\n*   Screen Size\n\nTo achieve effective separation variables in the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) operation an advanced operating control strategy is required, indicated by the control interface in Figure 7‑3. The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is designed so that several units can operate in series (A H Gray, 1997). For example, primary and scavenger <b title=\"A plant where ore is separated into concentrates and tails.\">concentrator</b>s can be run on the same pump line and at the same level, with different operating parameters, for enhanced overall recoveries (A H Gray, 1997).  \n \n\nIPJ and [flotation](https://en.wikipedia.org/wiki/Froth_flotation) Circuit Comparative Performance[](#IPJ_and_flotation_Circuit_Comparative_Performance)\n--------------------------------------------------------------------------------------------------------------------------------------------------------\n\nIn Figure 7‑6 a potential combined [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) and [flotation](https://en.wikipedia.org/wiki/Froth_flotation) process <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> flow diagram is described. This <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> is based the [Gekko](https://www.gekkos.com/) Python Underground Processing Plant module for the concentration of gold and sulfide ores. The <b title=\"Material entering a predetermined system.\">feed</b> rate and unit capacity of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) will vary significantly depending on the application of the <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> (S Gray and T Hughes, 2008). Figure 7‑7 shows as <b title=\"Material entering a predetermined system.\">feed</b> rate is increased the unit single pass recovery decreases. The [Gekko](https://www.gekkos.com/) Python module uses a fine screen in front of the conventional [flotation](https://en.wikipedia.org/wiki/Froth_flotation) cells. This is due to McLean et al (2007) notting that, [particle size](https://en.wikipedia.org/wiki/Particle_size)s, greater than 150 μm were not targeted in flash or conventional [flotation](https://en.wikipedia.org/wiki/Froth_flotation) due to poor [flotation](https://en.wikipedia.org/wiki/Froth_flotation) recovery efficiency (T Hughes, K Donaldson and B Murphy, 2010). Gold ore sample testwork yield/recovery curves predicted and compares results for an [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) gravity <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>, and a combined [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) gravity plus [flotation](https://en.wikipedia.org/wiki/Froth_flotation)  <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>, shown by Figure 7‑8.  \n\nGold ore testwork results predicting the impact on Gold Yield/Recovery from different [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) mass-pulls into the gravity Sinks, shown by Figure 7‑9.\n\nIPJ Modular Plant[](#IPJ_Modular_Plant)\n---------------------------------------\n\nMost [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) equipment <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>s are based on modular plant design, examples of which are shown in Figure 7‑10 and Figure 7‑11. [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) modular plants offer numerous advantages over conventionally tailored [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) plant designs. Because modular plants are pre-engineered, the manufacturing lead time is much shorter. Workshop pre-assembly results in simpler and quicker erection on site, which leads to shorter overall project duration, lower on-site installation costs and quicker returns. Modular [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) plant can more easily follow phased expansion later, once a steady mine cash flow has been established. The use of modular plants is also ideal in cases where a small deposit with a relatively short life of mine cannot support a large capital expenditure in the process plant.  \n \n\nIPJ Equipment Selection and Application[](#IPJ_Equipment_Selection_and_Application)\n-----------------------------------------------------------------------------------\n\nThe application of [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig)  <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b>, and its success, is very site- and ore-specific. [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) can be implemented on [Greenfield](https://en.wikipedia.org/wiki/Greenfield_land) projects or be considered for [Brownfield](https://en.wikipedia.org/wiki/Brownfield_land) expansions. On [Brownfield](https://en.wikipedia.org/wiki/Brownfield_land) projects, an [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) and [crushing](https://en.wikipedia.org/wiki/Crusher)  <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> is typically installed between the [primary crusher](https://en.wikipedia.org/wiki/Crusher) and primary mill. Introducing [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) to an existing operation allows the metal <b title=\"Metric for overall tonnage moving through a system within a  specified time.\">throughput</b> for the existing plant to be increased by treating more <b title=\"Run of mine\">ROM</b> material through the IPJ, while maintaining the same tonnage <b title=\"Metric for overall tonnage moving through a system within a  specified time.\">throughput</b> through the existing plant treating a higher grade, ‘softer’ ore. The typical option for [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) design operation includes engineered ceramic <b title=\"A thick bed of coarse heavy particles used in jigs.\">ragging</b> in S.G.’s from 1.6 to 5.0, full automation and improved designs of <b title=\"Material entering a predetermined system.\">feed</b> presentation and [tailings](https://en.wikipedia.org/wiki/Tailings) and <b title=\"Product generally produced by metal ore mines.\">concentrate</b> handling systems (S Gray and T Hughes, 2008). The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) single pass recovery was estimated to be between 32 – 53% for Gold, and 16 – 27% for [sulphides](https://en.wikipedia.org/wiki/Sulfide_mineral). Overall the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) was very effective at recovering valuables at [particle size](https://en.wikipedia.org/wiki/Particle_size)s above 212 µm (M Braaksma, P Gray, 2010).\n\nTable 8-1 describes [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) plant mineral specific applications.\n\nIPJ Operational Case Studies[](#IPJ_Operational_Case_Studies)\n-------------------------------------------------------------\n\n### Witswatersrand orebodies – South Africa[](#Witswatersrand_orebodies_South_Africa)\n\nThe chart in Figure 8‑2 is representative of the potential performance of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) in treating several gold Placer Witswatersrand (Wits) type ores (R Heins, R Spargo, A McCallum, 2003).  Figure 8‑2  shows that high potential recoveries with <b title=\"Relative proportion of feed mass in the accept stream after preconcentration.\">mass pull</b>s of less than 10% of the <b title=\"Material entering a predetermined system.\">feed</b> mass are possible from some Wits ores (R Heins, R Spargo, A McCallum, 2003). The gold recovery increases over and above that normally seen in Wits gravity <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>s as the sulphide associated gold component of the ore is recovered (R Heins, R Spargo, A McCallum, 2003). Because the InLine Pressure [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) is a continuous recovery device it recovers the gold bearing sulphide component as well as the free gold component and hence increases overall gravity gold recovery (R Heins, R Spargo, A McCallum, 2003).\n\n### Raura Base Metals - Peru[](#Raura_Base_Metals_-_Peru)\n\n“Pre-concentration of base metals such as sphalerite and galena from quartz is carried out at the Raura base metal mine in Peru (Bermejo Severino et al, 2006). Ore crushed to minus 19mm is fed to the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) and a high <b title=\"Relative proportion of feed mass in the accept stream after preconcentration.\">mass pull</b> is used to recover 94% of the galena and 87% of the sphalerite to the <b title=\"Product generally produced by metal ore mines.\">concentrate</b>. The relative CC ratios of galena and sphalerite help explain the difference in recovery with the CC for galena being significantly higher than sphalerite and hence higher recovery” (S Gray and T Hughes, 2008).\n\n### Rosh Pinah – South Africa[](#Rosh_Pinah_South_Africa)\n\nIPJ investigative testwork was performed on samples from Glencore’s Rosh Pinah lead and zinc mine in South Africa to determine the <b title=\"Subjective term for the larger sized component of feed\">coarse</b> st possible liberation size suitable for pre-concentration. The test work indicated that an [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig)  <b title=\"Methodologies used to separate gangue from valuable material.\">preconcentration</b>  <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b>, treating <b title=\"Classified material based on specific size constraints (i.e. two specific sizes).\">size fraction</b>s between +1.18 mm and -25 mm, has the potential to recover up to 90% of the Pb and Zn into 65% of the mass, as indicated by results described in Figure 8‑3  (N J Grigg & G J Delemontex, 2014).\n\n### Pirquitas Mine - Argentina[](#Pirquitas_Mine_-_Argentina)\n\nThe Pirquitas mine, a Silver Standard operation located in Argentina, is a poly-metallic mine with silver, zinc and tin as the primary minerals. Due to the highly variable grades within the orebody, pre-concentration was considered in order to meet the production required to develop the mine. The Pirquitas ore has a natural tendency to upgrade into the <b title=\"Subjective term for the smaller sized component of feed\">fines</b> fraction. ROM-crushed material is screened at 2mm with this fraction representing ~25% of the ore directed straight to the [ball mill](https://en.wikipedia.org/wiki/Ball_mill) at a 2:1 upgrade (N J Grigg & G J Delemontex, 2014). The remaining material (+2 mm -11 mm) is subjected to pre-concentration (N J Grigg & G J Delemontex, 2014).  The [JIG](https://en.wikipedia.org/wiki/Jig_concentrators) investigative test work indicated that +95% of the silver, tin and zinc could be recovered into a mass yield of ~50% at a <b title=\"Target top size of material post crusher.\">crush size</b> of -11 mm. Zinc recovery was lower as show in Fig. 7 indicating poorer liberation of the zinc minerals at the <b title=\"Target top size of material post crusher.\">crush size</b> tested (N J Grigg & G J Delemontex, 2014). The test work also showed a natural concentration of silver in the <b title=\"Subjective term for the smaller sized component of feed\">fines</b> (-1.7mm) after [crushing](https://en.wikipedia.org/wiki/Crusher) to minus 12mm with its grade typically twice that of the head grade (A H Gray, G Delemontex, N Grigg and T Yeomans, 2010).{DIV} {DIV( type=\"p\" align=\"justify\")} Based on operational data was collected from the Pirquitas plant, in 2010, an understanding of the anticipated performance of the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) process, was obtained. A typical <b title=\"Material accounting and adjusting within a system based on sampled points.\">mass balance</b> is shown in Fig. 11 and indicates the tonnage, silver grade and recovery expectations of the plant.  \n \n\n### Bendigo Mining Limited (BML) - Kangaroo Flat Site, Australia[](#Bendigo_Mining_Limited_BML_-_Kangaroo_Flat_Site_Australia)\n\nBendigo Mining operates a 600,000<b title=\"Tonnes per annum\">tpa</b> [comminution](https://en.wikipedia.org/wiki/Comminution), gravity, [flotation](https://en.wikipedia.org/wiki/Froth_flotation) and [leach](https://en.wikipedia.org/wiki/Leaching_%28metallurgy%29)ing processing plant for the recovery of gold from their Kangaroo Flat Operation, in the Bendigo goldfields. A plant audit was completed on 26th November 2009 designed to give an indication of the overall operational characteristics of the gravity <b title=\"General term for a collection of comminution/flotation equipment.\">circuit</b> including single pass efficiencies of associated equipment (M Braaksma, P Gray, 2010). One of the key outcomes of audit testwork noted was that liberation of much of the free gold occurred at 1 to 2 mm (M Braaksma, P Gray, 2010). The [leach](https://en.wikipedia.org/wiki/Leaching_%28metallurgy%29)able gold content in the streams collected around the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) were: 73.6% in the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig)  <b title=\"Material entering a predetermined system.\">feed</b>, 96.4% in the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig)  <b title=\"Product generally produced by metal ore mines.\">concentrate</b> and 67.4% in the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) Tails. This shows that the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) is preferentially recovering free gold (M Braaksma, P Gray, 2010).  The [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) single pass recovery was estimated to be between 32 – 53% for Gold, and 16 – 27% for [sulphides](https://en.wikipedia.org/wiki/Sulfide_mineral) (M Braaksma, P Gray, 2010). Overall the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig) was very effective at recovering valuables at [particle size](https://en.wikipedia.org/wiki/Particle_size)s above 212 µm (M Braaksma, P Gray, 2010).  \n\nA simplified process <b title=\"A spatially constrained unit within the resource model.\">block</b> <b title=\"A specific design within IES or a given circuit configuration.\">flowsheet</b> is given in Figure 8‑8.\n\nA <b title=\"Material accounting and adjusting within a system based on sampled points.\">mass balance</b> produced from the survey data is shown in Table 8‑2. A <b title=\"Material accounting and adjusting within a system based on sampled points.\">mass balance</b> produced from the survey data indicates that the mill <b title=\"Material entering a predetermined system.\">feed</b> grade is 12.6<b title=\"Grams per tonne\">g/t</b> (M Braaksma, P Gray, 2010).  \n \nThe Gold, Sulfur and Arsenic [assay](https://en.wikipedia.org/wiki/Assay)s in the streams are summarised in Figure 4. Mill <b title=\"Material entering a predetermined system.\">feed</b> gold grade accuracy of this number is highly dependent on the estimated mass flow in the [IPJ](https://www.gekkos.com/solutions/inline-pressure-jig)  <b title=\"Product generally produced by metal ore mines.\">concentrate</b>, which proved to be difficult to measure. Our confidence level of the number used (6% <b title=\"Relative proportion of feed mass in the accept stream after preconcentration.\">mass pull</b> ) is +/-25% (M Braaksma, P Gray, 2010).\n\nGRAT Testing[](#GRAT_Testing)\n=============================\n\nThe standard<b title=\"Gangue Rejection Amenability Test (Curtin University)\">GRAT</b> v2 (referred to as<b title=\"Gangue Rejection Amenability Test (Curtin University)\">GRAT</b> for the remainder of the paper) is a sequential sink-float procedure, again using HLS as a proxy for liberation of gold from the [gangue](https://en.wikipedia.org/wiki/Gangue). This ideal separation describes an intrinsic characteristic of the ore and not the ability of a separation device to recover that material. The method uses a propriety blend of lithium tungstate salts (known as LST) to separate from 2.95 to 2.55 in increments of 0.1 units of SG. The method, shown in FIG 2, has now been applied to 10 gold ore samples in 16 different tests.\n\n[![GravGratFlow](https://res.cloudinary.com/shapeable/image/upload/v1687303445/wikiore/92.jpg)](https://res.cloudinary.com/shapeable/image/upload/v1687303445/wikiore/92.jpg)\n\nFurther details and a description of the test methodologies can be found at McGrath et al. (2018b) and McGrath et al. (2017).\n\n(([Grade Engineering](/pages/wikiore-introduction-to-grade-engineering) [block model](https://en.wikipedia.org/wiki/Mineral_resource_estimation#Resource_block_model)|Next Chapter 6: [Grade Engineering](/pages/wikiore-introduction-to-grade-engineering) [block model](https://en.wikipedia.org/wiki/Mineral_resource_estimation#Resource_block_model)))"},"organisations":[],"embeds":{"citations":[],"imageAssets":[]},"video":null,"banner":null,"fileAssets":[],"citations":[],"feedEntries":[],"posts":[],"moderators":[]}}},"pageContext":{"lang":{"id":"en","path":"","iso":"en","name":"English","label":"English"},"availableEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend","OrganisationType","HorizonType","Economy","FeedEntry","Video","Citation","Objective","ProfileType","ExpertiseLevel"],"detailEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend"],"site":{"id":"65d2edd1ebf7bb9388ffb0df","slug":"connect-ore","name":"ConnectOre","url":"https://connectore.org","title":"ConnectOre","twitter":null,"threads":null,"facebook":null,"linkedin":null,"instagram":null,"flickr":null,"tiktok":null,"youtube":null,"ownerName":"ICAA","recaptchaKey":"6LfG2J0qAAAAAHDCFfJnrWOj6DiWJGik5BAa_7p8","googleSiteVerification":null,"platformName":"ConnectOre","platformUrl":"https://platform.connectore.org","supportEmail":null,"contactEmail":null,"mainMenu":{"id":"65d2edaaebf7bb9388ffaf79","slug":"website-navigation"},"linearMenu":null,"entityViews":[{"id":"67528c24c135ebcfc668f1ba_65d2edd1ebf7bb9388ffb0df","name":"Value Chain","hash":"value-chain","label":null,"slug":"value-chain","count":0,"showCount":null,"disabled":null,"icon":{"id":"6752a61b8b51dfa7b77b1e37","name":"Connections Navigator Icon Glyph","slug":"connections-navigator-icon-glyph","component":"ConnectionsNavigatorIconGlyph"},"childEntityTypes":[{"id":"6667fa4ff794dd6e045135c1","name":"Value Chain Theme","internalName":"Trend"},{"id":"6667fa58f794dd6e045135c6","name":"Topic","internalName":"Topic"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"6757ef1ede8adbd45cf19474_65d2edd1ebf7bb9388ffb0df","name":"Bulletin Board","hash":"bulletin-board","label":null,"slug":"bulletin-board","count":0,"showCount":null,"disabled":null,"icon":{"id":"681c2cebbccc5a72d8382f31","name":"Tag Icon","slug":"tag-icon","component":"TagDotIconGlyph"},"childEntityTypes":[],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528d88c135ebcfc668f31b_65d2edd1ebf7bb9388ffb0df","name":"Innovations","hash":"innovations","label":null,"slug":"innovations","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528d74c135ebcfc668f315","name":"Innovation","internalName":"innovation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67625640fbc7c50d8644c592_65d2edd1ebf7bb9388ffb0df","name":"Community","hash":"community","label":null,"slug":"community","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528404c135ebcfc668ee1c","name":"Person","internalName":"Person"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528e1bc135ebcfc668f33a_65d2edd1ebf7bb9388ffb0df","name":"Stakeholder Map","hash":"stakeholder-map","label":null,"slug":"stakeholder-map","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"66680141f794dd6e0451367a","name":"Organisation","internalName":"Organisation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67529040c135ebcfc668f4ae_65d2edd1ebf7bb9388ffb0df","name":"References","hash":"references","label":null,"slug":"references","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"6752902fc135ebcfc668f4a4","name":"Article","internalName":"FeedEntry"},{"id":"67529039c135ebcfc668f4aa","name":"Citation","internalName":"Citation"},{"id":"67528de9c135ebcfc668f328","name":"Catalyst","internalName":"catalyst"},{"id":"67528df9c135ebcfc668f32d","name":"Page","internalName":"page"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]}],"entityAppViews":[],"entityOnboardingViews":[{"id":"680c3a4ebc80e4d0f3cfa2ef_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Step","hash":"trend-expertise-step","label":null,"slug":"trend-expertise-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Onboarding Grid","slug":"trend-expertise-onboarding-grid","label":null,"updated":"2025-04-26T01:42:10.20","layout":{"id":"680c3993bc80e4d0f3cfa2dd","name":"Slice Onboarding Trend Expertise Grid","slug":"slice-onboarding-trend-expertise-grid","component":"SliceLayoutOnboardingTrendExpertiseGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":null,"titleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_titleRich","text":"Are you **an industry expert** in any of these Value Chain Themes?"}}]},{"id":"680c3a85bc80e4d0f3cfa2fa_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Step","hash":"profile-types-step","label":null,"slug":"profile-types-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Onboarding Grid","slug":"profile-types-onboarding-grid","label":null,"updated":"2025-04-26T01:44:34.63","layout":{"id":"680c3a13bc80e4d0f3cfa2e4","name":"Slice Onboarding Profile Types Grid","slug":"slice-onboarding-profile-types-grid","component":"SliceLayoutOnboardingProfileTypesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"Which best describes you?","titleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]},{"id":"680c3aaabc80e4d0f3cfa2ff_65d2edd1ebf7bb9388ffb0df","name":"Objectives Step","hash":"objectives-step","label":null,"slug":"objectives-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df","name":"Objectives Onboarding Grid","slug":"objectives-onboarding-grid","label":null,"updated":"2025-04-26T01:45:12.76","layout":{"id":"680c3a3fbc80e4d0f3cfa2ea","name":"Slice Onboarding Objectives Grid","slug":"slice-onboarding-objectives-grid","component":"SliceLayoutOnboardingObjectivesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"What are your priority objectives?","titleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]}],"gptLanguages":[{"id":"65d2eda5ebf7bb9388ffaf1f","name":"English","slug":"english","iso":"en","locale":"en_US","path":"/en","label":"English","menuLabel":null},{"id":"666f70b6e051ad9ef086d1be","name":"Arabic","slug":"arabic","iso":"ar","locale":"ar_AE","path":"/ar","label":"عربي","menuLabel":null},{"id":"666f7161e051ad9ef086d1c4","name":"Spanish","slug":"spanish","iso":"es","locale":"es_ES","path":"/es","label":"español","menuLabel":null},{"id":"666f71c9e051ad9ef086d1c8","name":"German","slug":"german","iso":"de","locale":"de_DE","path":"/de","label":"Deutsch","menuLabel":null},{"id":"65d2eda5ebf7bb9388ffaf20","name":"French","slug":"french","iso":"fr","locale":"fr_FR","path":"/fr","label":"Français","menuLabel":null}],"gptQuestionTemplate":{"id":"662c7f6e81ef1920e3638518","name":"Standard Open Question","slug":"standard-open-question","path":"/prompt-templates/standard-open-question","__typename":"PromptTemplate","_entityTypeName":null,"label":"CopperAI","type":{"id":"662c7f1981ef1920e363850f","name":"Ask","slug":"ask"},"description":{"text":"This template is tailored for providing accurate responses based on specific context. It integrates contextual details from \"contextual information\" and addresses the \"target question\". The response is always in English, prioritizing clarity. If the answer is unknown, the template openly acknowledges this, ensuring honesty and avoiding speculation. This format is ideal for precise, context-sensitive, and truthful answering."},"summary":{"text":"Ask a general question about Website content"},"gptModel":{"id":"67564c4f2f6749787d0e03dc","name":"OpenAI GPT 4o","slug":"open-ai-gpt-4-o","dataSetId":"openai:gpt-4o"},"variablesPrompt":{"text":""},"submitLabel":"Ask","languages":[],"icon":{"id":"67528b9cc135ebcfc668f1a3","name":"AI Lower Case Icon Glyph","slug":"ai-lower-case-icon-glyph","component":"AiLowerCaseIconGlyph"},"variables":[{"id":"6668076bf794dd6e045138d9","name":"question","slug":"question","useVectorStore":true,"label":"What would you like to know?","labelAnother":null,"help":{"text":""},"options":{"text":""},"defaultValue":null,"entityTypes":[],"controlType":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"},"labelContextual":null,"labelAnotherContextual":null,"helpContextual":{"text":""},"optionsContextual":{"text":""},"defaultValueContextual":null,"entityTypesContextual":[],"controlTypeContextual":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"}}]},"advertisements":[],"logoVerticalOffset":null,"logoHorizontalOffset":null,"logoVerticalOffsetMobile":null,"logoHorizontalOffsetMobile":null,"logoVerticalOffsetTablet":null,"logoHorizontalOffsetTablet":null,"logoVerticalOffsetDesktop":null,"logoHorizontalOffsetDesktop":null,"logoHeightMobile":44,"logoHeightTablet":null,"logoHeightDesktop":null,"headerHeightMobile":null,"headerHeightTablet":null,"headerHeightDesktop":null,"logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807465/copper-connect/site/copper-connect_logo__CopperOre_Master_Brand_Identity-colour_cd4vgg.webp","type":"image/webp","width":945,"height":266},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807452/copper-connect/site/copper-connect_logoInverted__CopperOre_Master_Brand_Identity-white_chnucx.webp","type":"image/webp","width":945,"height":266},"footerMenu":null,"footerSecondaryMenu":null,"footerContent":{"text":"© {year} ConnectOre. All Rights Reserved\n"},"creator":null,"poweredBy":{"id":"65d2edadebf7bb9388ffafc8","name":"Shapeable","slug":"shapeable","url":"https://shapeable.ai","logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1674010034/platform/organisation/shapeable_logo__shapeable.png","type":"image/png","width":1174,"height":368},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1729474494/copper-connect/organisation/shapeable_logoInverted__shapeable-logo-inverted_sdcfpk.png","type":"image/png","width":392,"height":118},"logoSubtle":null},"poweredByLabel":null,"poweredByContent":{"text":""},"explorerPage":{"name":"Explorer","title":null,"slug":"explorer","path":"/explorer"},"termsPage":{"name":"Terms of Use","title":null,"slug":"terms-of-use","path":"/terms-of-use"},"homePage":null,"knowledgeHubPage":{"name":"News","title":null,"slug":"news","path":"/news"},"privacyPolicyPage":{"name":"Privacy Policy","title":null,"slug":"privacy-policy","path":"/privacy-policy"},"summary":{"text":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action"},"thumbnail":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"},"openGraph":{"title":"ConnectOre","date":"2026-07-31T04:44:47.80","description":{"plain":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action\n"},"image":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png","type":"image/png","thumbnails":{"full":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"}}}},"termsAndConditions":{"text":""},"privacyPolicy":{"text":"At ConnectOre we respect your privacy. We want to ensure that you get the information, content, and experiences that matter most to you. ConnectOre is committed to protecting the privacy of its stakeholders, communities, and other contacts.\n\n## Scope\n\nThis privacy policy applies to all personal data processed by full-time and part-time employees, volunteers when acting on behalf of ConnectOre contractors and partners doing business on behalf of ConnectOre, as well as all legal entities, all operating locations in all countries, and all business processes conducted by ConnectOre.\n\n## Information Collected\n\n#### What information do we collect?\n\nConnectOre collects the following personal data in line with the use purposes explained in a subsequent section:\n\n  * Your name and contact details\n  * Online profile data/usage\n  * Contact information\n  * Social media profile information\n  * Education and professional information\n  * Registration and participation in ConnectOre events and activities \n  * Information about service usage\n  * Cookies\n  * Authentication data\n  * Location information\n  * Author and peer review information\n  * Other information you upload or provide to us\n\n#### How do we use your information?\n\nConnectOre uses (and, where specified, shares) your personal information for the following purposes:\n\n  * To provide support or other services. ConnectOre may use your personal information to provide you with support or other services that you have ordered or requested. ConnectOre may also use your personal information to respond directly to your requests for information, including registrations for webinars, or other specific requests, or pass your contact information to the appropriate ConnectOre supplier or reseller for further follow-up related to your interests.\n  * To provide information based on your needs and respond to your requests. ConnectOre may use your personal information to provide you with notices of new product releases and service developments.\n  * To administer products. ConnectOre may contact you if you make use of (digital) products we offer, to confirm certain information (for example, that you did not experience problems in a download process). We may also use this information to confirm compliance with licensing and other terms of use and may share it with your company/institution.\n  * To assist in your participation in ConnectOre activities. ConnectOre will communicate with you, if you are participating in certain ConnectOre activities such as ConnectOre Summit, authoring or reviewing a ConnectOre article, or ConnectOre humanitarian activities. ConnectOre may send you information such as update messages related to those activities (such as but not limited to the event's content, and event logistics)\n  * To update you on relevant ConnectOre events and opportunities. ConnectOre may communicate with you regarding relevant ConnectOre events and opportunities.\n  * To protect ConnectOre content and services. We may use your information to prevent potentially illegal activities and to enforce our terms and conditions.\n  * To get feedback or input from you. In order to deliver products and services of most interest to our stakeholders, from time to time, we may ask you to provide us input and feedback (for example through surveys).\n\n#### How can you control your information?\n\nYou can control the information we have about you and how we use as follows:\n\n  * If you are a registered guest for ConnectOre Annual Summit 2021, any request for review, revise or correction of your personal data can be sent to john.fennell@copper.com.au specifying your request.\n\n#### Personal data about minors and children\n\nConnectOre does not knowingly collect data from or about children under 16 without the permission of parent(s)/guardian(s). If we learn that we have collected personal information from a child under 16, we will delete that information as quickly as possible. If you believe that we might have any information from or about a child under age 16, please contact us.\n\n#### How will you know if the Privacy Policy is changed?\n\nConnectOre may update its Privacy Policy from time to time. If we make any material changes you will be notified by means of a notice on our website prior on the date the change becomes effective. We encourage you to periodically review this page for the latest information on our privacy practices.\n\n## Technical And Regulatory Information\n\n#### Logging practices\n\nConnectOre automatically records the Internet Protocol (IP) addresses of visitors. The IP address is a unique number assigned to every computer on the internet. Generally, an IP address changes each time you connect to the internet (it is a \"dynamic\" address). Note, however, that if you have a broadband connection, depending on your individual circumstance, the IP address that we collect may contain information that could be deemed identifiable. This is because, with some broadband connections, your IP address doesn't change (it is \"static\") and could be associated with your personal computer.\n\nAs well as recording the IP addresses of users, ConnectOre may also keep track of sites that users visited immediately prior to visiting ConnectOre's website and the search terms they used to find it. We keep track of the pages visited on ConnectOre's website, the amount of time spent on those pages and the types of searches done on them. Your searches remain confidential and anonymous. ConnectOre uses this information only for statistical purposes to find out which pages users find most useful and to improve the website.\nConnectOre also captures and stores information that you transmit. This may include:\n\n  * Browser/Device type/version\n  * Operating system used\n  * Media Access Control (MAC) address\n  * Date and time of the server request\n  * Volume of data transferred\n\n#### External links behaviour\n\nSome of the links on ConnectOre's websites link to other sites created and maintained by other public- and/or private-sector organizations. ConnectOre provides these links solely for your information and convenience. When you transfer to an outside website, you are leaving ConnectOre domain, and ConnectOre's information management policies no longer apply. ConnectOre encourages you to read the privacy statement of each external website that you visit before you provide any personal data.\n\n#### Cookies and web beacons\n\nCookies and web beacons are electronic placeholders that are placed on your device by websites to track your individual movements on that website over time. ConnectOre uses both session-based cookies (which last only for the duration of the user's session) and persistent cookies (which remain on your device and provide information about the session you are in and waits for the next time you use that site again).\n\nThese cookies and web beacons provide useful information to ConnectOre, enabling us to recognize repeat users, facilitate the user's access to and use of our sites, allows us to track usage behavior, and to balance the usage of our websites on all ConnectOre web servers.\nTracking cookies, third-party cookies, and other technologies such as web beacons may be used to process additional information, enable non-core functionalities on ConnectOre website and enable third-party functions (such as a social media \"share\" link). We may also include web beacons and other similar technology in promotional email messages to determine whether the messages have been opened.\n\n#### Do Not Track (DNT)\n\nThe online advertising industry has self-regulatory initiatives designed to provide consumers a choice in the types of ads they may see online and to conveniently opt-out from online behavioral ads served by some or all of the companies participating in these programs. Our websites do not respond to DNT consumer browser settings.\n\n#### Responses to legal requests\n\nConnectOre reserves the right to share your information to respond to duly authorized information requests of governmental authorities or where required by law.\n\n#### Your data rights\n\nConnectOre complies with all applicable data privacy laws and regulations including, but not limited to, the General Data Protection Regulation (GDPR) and the California Consumer Privacy Act (CCPA). Under these laws and regulations, you may have certain rights to your data. Should you wish to exercise any of these rights, please send an email request to john.fennell@copper.com.au with \"Data Privacy Request'' in the subject line and in the email please identify the specific privacy right you request assistance with. Please note additional information may be requested prior to fulfilling a request and that ConnectOre reserves the right to charge a fee, where permitted, to cover the cost of certain requests.\n\n#### How do I contact you if there is an issue?\nIf you have any questions or concerns about this Privacy Policy or about the use of your personal information, please feel free to contact us by email at john.fennell@copper.com.au"},"welcomeUrl":"https://connectore.org/app/welcome","welcomeTitle":"Welcome to ConnectOre and thanks for joining us! ","invitationAction":"join the ConnectOre community","setupCompletionMessage":null,"languages":[],"brandColors":[],"showLogin":true,"showShareMenu":null,"showFollowMenu":true,"showPlatformLogin":null,"showContactUs":null,"loginLabel":"Explorer Login","platformLoginLabel":"Community Platform","headerButtons":[]},"includeProfile":true,"disableProfileEditing":false,"dynamicEntityTypeNames":["Person","Organisation"],"profilePath":"/app/profile","welcomePath":"/app/welcome","id":"65d2edd7ebf7bb9388ffb16c","slug":"gravity-separation-characterisation","entityPath":"/sub-topics/gravity-separation-characterisation","openGraph":{},"entityTypeName":"SubTopic","name":"Gravity Separation Characterisation","updated":"2024-12-20T03:39:53.41","__type":"SubTopic"}},
    "staticQueryHashes": ["1044227382","1158597448","1242646999","1427075558","1452322194","1520036161","1545705019","1586309863","1606754935","1816168740","1864381666","1903214493","1945056504","1989845544","2034981229","2181044613","2409034939","2463401854","2526615987","2642656775","2862279633","2867243664","2910164142","2912920178","296816903","3073584486","3150399266","3172506128","3320076387","3447680494","3453148481","3624873332","364221563","3692255024","3778988535","3782604890","4091857177","4216505212","591477963","701411134","758936535","80004486","857137463","881103158"]}