{
    "componentChunkName": "component---src-gatsby-entities-sub-topic-tsx",
    "path": "/sub-topics/designing-bulk-ore-sorting-trials",
    "result": {"data":{"platform":{"subTopic":{"__typename":"Platform_SubTopic","_schema":{"label":"Sub Topic","pluralLabel":"Sub Topics"},"openGraph":{"title":"Designing Bulk Ore Sorting Trials","description":{"text":"Key Objectives[](#Key_Objectives)\n=================================\n\n**_This experimental design is a real world example that was deployed to a [pilot plant](https://en.wikipedia.org/wiki/Pilot_plant) at an operational mine_**..."},"image":null},"id":"65d2edd7ebf7bb9388ffb167","slug":"designing-bulk-ore-sorting-trials","name":"Designing Bulk Ore Sorting Trials","path":"/sub-topics/designing-bulk-ore-sorting-trials","outlineNumber":null,"color":null,"intro":{"id":"65d2edd7ebf7bb9388ffb167_intro","text":""},"description":{"id":"65d2edd7ebf7bb9388ffb167_description","text":"Key Objectives[](#Key_Objectives)\n=================================\n\n**_This experimental design is a real world example that was deployed to a [pilot plant](https://en.wikipedia.org/wiki/Pilot_plant) at an operational mine_** to determine whether sensor-based elemental analysis utilizing [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) and on-belt [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) of proxy elements (Cu, Ni and/or other elements), is able to economically sort PGEs in <b title=\"Post blast material in the load/haul cycle.\">run-of-mine</b> material (ROM) from <b title=\"Exit point from current pit.\">ex-pit</b> and [stockpiles](https://en.wikipedia.org/wiki/Stockpile). The plant was scaled appropriately to progress directly into production mode at the completion of the project.\n\nDirect sensor-based elemental measurements of PGEs are not possible at the grades mined and processed using [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) and [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) on-belt technologies. The experimental design consists of three phases and the objectives of each phase is summarised as follows:\n\n*   **Phase 0** – Preliminary testing and data analysis of sensor units, as well as assessment of [natural deportment](/pages/wikiore-natural-deportment) response prior to commissioning of the [bulk ore sorting](/pages/wikiore-bulk-sorting) [pilot plant](https://en.wikipedia.org/wiki/Pilot_plant).\n*   **Phase 1** – Static and <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of the sensors, demonstrate sensor performance, prove the sensors can drive separation, develop yield <b title=\"Curve generated by plotting response factors across sizes.\">Response Curve</b>s for sensor [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) values and assess integration of [Grade Engineering](/pages/wikiore-introduction-to-grade-engineering) Screening.\n*   **Phase 2** – Demonstrate <b title=\"Trials run at or near the size required for an operation.\">production scale</b> [bulk ore sorting](/pages/wikiore-bulk-sorting) and validate separation by campaign of accept and <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b>s at processing plant.The output of the experimental design will provide site with sufficient information to assess and optimise strategies for deploying [bulk ore sorting](/pages/wikiore-bulk-sorting) and continuing production of the pilot [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.\n\n  \n\nSecondary Objectives[](#Secondary_Objectives)\n---------------------------------------------\n\nThe experimental design provides opportunities to evaluate whether the sensor-based elemental analysis ([PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) and XRF) can support differentiation of lithologies to support [geomet](https://en.wikipedia.org/wiki/Geometallurgy)allurgical programmes and the identification of deleterious [metallurgical](https://en.wikipedia.org/wiki/Metallurgy) ore types for separation and stockpiling.\n\n  \n\nMethodology[](#Methodology)\n===========================\n\nThe methodology to conduct the experimental design for [bulk ore sorting](/pages/wikiore-bulk-sorting) is described in this section. The methodology includes the following areas, which are described in greater details in the proceeding sections:\n\n*   Equipment\n*   Sample Selection\n*   Experiment Design Phases:\n    *   Experimental Phase 0: Preliminary Testwork and Analysis\n    *   Experimental Phase 1a: Calibration of the Sensors\n    *   Experimental Phase 1b: Proving the Technology\n    *   Experimental Phase 1c: Proving Separation\n    *   Experimental Phase 1d: <b title=\"Term for operational limitations imposed within preconcentration activities.\">minimum separation capability</b>\n    *   Experimental Phase 1e: Develop Yield-Response Curves\n    *   Experimental Phase 2a: Demonstrate <b title=\"Trials run at or near the size required for an operation.\">production scale</b>\n    *   Experimental Phase 2b: Campaign material\n\n  \n\nEquipment Utilised[](#Equipment_Utilised)\n=========================================\n\n*   Front End [loader](https://en.wikipedia.org/wiki/Loader_%28equipment%29)\n*   Pilot [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant\n    *   Receiving [hopper](https://en.wikipedia.org/wiki/Hopper_%28particulate_collection_container%29)\n    *   <b title=\"Material entering a predetermined system.\">feed</b>er\n    *   Sizer\n    *   Intermediate conveyor\n    *   <b title=\"Device used to weigh material on a conveyor belt.\">Weightometer</b>s\n    *   [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) <b title=\"Positional placement of sensors to capture information about belt feed material.\">on-belt sensor</b> and moisture analyser\n    *   XRF <b title=\"Positional placement of sensors to capture information about belt feed material.\">on-belt sensor</b>\n    *   Elevator conveyor\n    *   Classification structure / Flopgate\n    *   Radial stackers\n*   [excavator](https://en.wikipedia.org/wiki/Excavator)\n*   Stockpile surveying capability (Daily to multiple times daily) – Tonnage calculation capability\n*   secondary[crushing](https://en.wikipedia.org/wiki/Crusher) and Sampling Plant (Calibration and Validation)\n    *   Jaw and [cone crusher](https://en.wikipedia.org/wiki/Crusher#Cone_crusher)s\n    *   Transfer conveyors\n    *   Vezin sampler\n    *   Sample crusher\n    *   Large [riffle split](https://en.wikipedia.org/wiki/Riffle_splitter)ter or <b title=\"Device used to separate feed material into multiple sub-samples.\">rotary split</b> ter\n*   Screens for [grade by size](/pages/wikiore-natural-deportment) sample preparation (screens ranging from 150mm – 10mm)\n*   Sample preparation facilities to pulverise samples for [assay](https://en.wikipedia.org/wiki/Assay)\n*   Technicians and Supervisors for sample collection, preparation and splitting\n*   Stockpile loading (FEL) and transport ([truck](https://en.wikipedia.org/wiki/Haul_truck)s)\n\n  \n\nSample Selection[](#Sample_Selection)\n=====================================\n\nSample selection for the [bulk ore sorting](/pages/wikiore-bulk-sorting) experimental design should focus on:\n\n1.  dominant ore types to be mined in the short to medium term (1-5 year mine plan),\n\n<b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s of highest Ni and Cu grades with consistent correlation to PGEs (and other elements identified with a significant correlation to PGEs),\n\n1.  PGE grade ranges of strategic significance to [bulk ore sorting](/pages/wikiore-bulk-sorting), and\n\n<b title=\"Exit point from current pit.\">ex-pit</b> material, where the spatial location of the sample can be tracked back to <b title=\"Data that has a clear position in 3d space (eg. Drill holes, GPS etc…).\">spatial data</b> bases (<b title=\"Digitised model of the deposit.\">resource model</b> , <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> , <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> ).  \nThis approach will maximise potential opportunities for [bulk ore sorting](/pages/wikiore-bulk-sorting) in the short to medium term and the financial return of the [bulk ore sorting](/pages/wikiore-bulk-sorting) [pilot plant](https://en.wikipedia.org/wiki/Pilot_plant). The [bulk ore sorting](/pages/wikiore-bulk-sorting) response of stockpiled material will be assessed, as the sorting of VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile) is of strategic importance. However, preference for <b title=\"Exit point from current pit.\">ex-pit</b> material of known origin in the mine is preferred to allow the mapping of the [bulk ore sorting](/pages/wikiore-bulk-sorting) response of samples to <b title=\"Data that has a clear position in 3d space (eg. Drill holes, GPS etc…).\">spatial data</b> bases (<b title=\"Digitised model of the deposit.\">resource model</b> , <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> , <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> ). A secondary objective to identify potential elemental markers for the differentiation of ore types will also be examined to support [geomet](https://en.wikipedia.org/wiki/Geometallurgy)allurgical programmes and test the viability of using the sensor technologies ([PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) and XRF) to identify and separate deleterious ore types.\n\n**Dominant Ore Types**  \nThe experimental design will assess the [bulk ore sorting](/pages/wikiore-bulk-sorting) responses of the two most dominant ore types planned to be mined in the short to medium-term (Pyroxenite and Feldspathic Pyroxenite). The dominant ore types to be mined can be identified using the short-term (12 month) and medium-term (2-5 years) mine plans. Volumes or tonnages of each ore type planned to be delivered to the processing plant and [stockpiles](https://en.wikipedia.org/wiki/Stockpile) will be used to rank the dominant ore types to be mined in the next two to five years. This assessment may be extended to the next most dominant ore type if sufficient time is available in the experimental schedule for the material to be delivered to the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.\n\n**Deleterious Ore Types**  \nAs a secondary objective, two deleterious ore types will be examined to test the viability of the sensor technologies to identify and potentially separate these deleterious ores. The two recommended deleterious ore types to be examined are Calc Silicate and Serpentised Pyroxenite.\n\n**Correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s of Ni and Cu to PGEs**  \nPreliminary work evaluated the correlation of Ni and Cu to PGEs using geostatistical analysis of <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> across the [resource estimation](https://en.wikipedia.org/wiki/Mineral_resource_estimation) <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s. This work has identified the central <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s as having higher Cu and Ni grades and a more consistent relationship between Cu and Ni to PGEs (when compared to other ore <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s). For this reason, the highets correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s should be given highest priority in sample selection with at least two of these <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s evaluated during the experimental design.\n\n**Grade Ranges**  \nThe response and strategy for [bulk ore sorting](/pages/wikiore-bulk-sorting) and the correlation of Cu and Ni to PGEs is likely to differ across the [PGE](https://en.wikipedia.org/wiki/Platinum_group) grade ranges. The experimental design will test grade ranges of significance for [bulk ore sorting](/pages/wikiore-bulk-sorting), focussing on the very low grade ore (VLGO), low grade ore (LGO) and medium grade ore (MGO) as currently defined by site. Small samples of high grade ore (HGO) may be used if MGO is not available.\n\n**<b title=\"Exit point from current pit.\">ex-pit</b> vs Stockpile**  \n<b title=\"Exit point from current pit.\">ex-pit</b> samples are preferred to stockpiled material as it allows the connection of information from <b title=\"Data that has a clear position in 3d space (eg. Drill holes, GPS etc…).\">spatial data</b> bases (<b title=\"Digitised model of the deposit.\">resource model</b> , <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> , <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> ) to be related to the measured [bulk ore sorting](/pages/wikiore-bulk-sorting) response of these samples. This approach facilitates opportunities to assess the potential use of the known <b title=\"Data that has a clear position in 3d space (eg. Drill holes, GPS etc…).\">spatial data</b> bases to predict [bulk ore sorting](/pages/wikiore-bulk-sorting) responses in future ores. The [bulk ore sorting](/pages/wikiore-bulk-sorting) response of samples from [stockpiles](https://en.wikipedia.org/wiki/Stockpile) of strategic importance for [bulk ore sorting](/pages/wikiore-bulk-sorting) (VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile)) will be assessed during Phase 1 of the experimental design. These samples (VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile)) will help to determine the extent of any homogenisation that has occurred in stockpiled ore.In essence, it is recommended to progress from the most well informed and most probable heterogeneous material (defined expit <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> ore), to the least informed and additional [heterogeneity](/pages/wikiore-heterogeneity) disrupted material (historical stockpiled ore).\n\n**Sample Collection and Delivery**  \nAn accurate record of each sample collected and delivered to the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant must include the [lithology](https://en.wikipedia.org/wiki/Lithology) (ore type), <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> , estimated grade range, sample collection location (GPS position), date and time of collection and quantity collected. All samples delivered to the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant must be kept separate (not touching other [stockpiles](https://en.wikipedia.org/wiki/Stockpile) or berms/barriers) and clearly signed with sample ID and information. Regular surveys of the samples delivered to the [bulk ore sorting](/pages/wikiore-bulk-sorting) facility must be maintained to record the location of delivered samples and monitor remaining sample volumes during the [bulk ore sorting](/pages/wikiore-bulk-sorting) trial. The placement of sample [stockpiles](https://en.wikipedia.org/wiki/Stockpile) must allow sufficient space to manoeuvre the [loader](https://en.wikipedia.org/wiki/Loader_%28equipment%29) to access and load any of the samples safely and efficiently.\n\nSample delivery to the [bulk ore sorting](/pages/wikiore-bulk-sorting) facilities should occur on a “just in time” basis, as this will minimise the quantity and volume of sample [stockpiles](https://en.wikipedia.org/wiki/Stockpile) required to be maintained at the [bulk ore sorting](/pages/wikiore-bulk-sorting) facilities. However, this strategy relies on the samples being available in the mine plan upon commissioning of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant and during trials. Where this is not possible, sample collection and delivery to the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant will occur prior to commissioning of the device as material satisfying the desired requirements becomes available in the mine plan.\n\n  \n\nExperimental Phases[](#Experimental_Phases)\n===========================================\n\nExperimental Phase 0: Preliminary Testwork and Analysis[](#Experimental_Phase_0:_Preliminary_Testwork_and_Analysis)\n-------------------------------------------------------------------------------------------------------------------\n\n*   Data Analysis for the development of initial sorting algorithm, limitations in application and sample locations,\n*   XRF “Offline Calibration Jig”, and\n*   [natural deportment](/pages/wikiore-natural-deportment) testwork - assist\n\nPreliminary data analysis of <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> , <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> database, [block model](https://en.wikipedia.org/wiki/Mineral_resource_estimation#Resource_block_model) and mine plan will assist in identifying:\n\n*   Elemental (Cu, Ni, others) correlations to PGEs within ore types and <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s, which will assist in the development of initial sorting algorithms to verify and refine in Phase 1 of the [bulk ore sorting](/pages/wikiore-bulk-sorting) trial\n*   Dominant ore types to target for the [bulk ore sorting](/pages/wikiore-bulk-sorting) trial; and\n*   Areas of high and low [heterogeneity](/pages/wikiore-heterogeneity) to target during the [bulk ore sorting](/pages/wikiore-bulk-sorting) trials.\n\nPreliminary analysis of <b title=\"Exploration and infill drill hole data (typically diamond drill core).\">resource drilling</b> has been performed and identified the central <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s as having higher Cu and Ni grades and more consistent correlation to PGEs. Similar analysis should be performed to identify the use of elemental correlations within ore types and different areas of estimation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s to assist in the development of a preliminary sorting algorithm to verify and refine during Phase 1 of the [bulk ore sorting](/pages/wikiore-bulk-sorting) trial. **_Preliminary analysis of short to medium term mine plans will assist in sample selection and scheduled delivery of samples to the [bulk ore sorting](/pages/wikiore-bulk-sorting) facilities._**\n\n[RADOS](https://radosxrf.com/) [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) “Offline Calibration Jig”  \nThe [RADOS](https://radosxrf.com/) on-belt [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) bulk ore sensor represents a new product line from [RADOS](https://radosxrf.com/) who have strong expertise in [particle sorting](https://en.wikipedia.org/wiki/Sensor-based_sorting) applications. As such, [RADOS](https://radosxrf.com/) may benefit from an initial “<b title=\"Equipment not impacting normal site operation.\">off-line</b> calibration Jig” to test their on-belt [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensor utilising small samples (100kg) of crushed or sized<b title=\"Run of mine\">ROM</b> ore (P100 <150mm), across different grade ranges and similar to what will be delivered by the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant. This should be possible after discussions with [RADOS](https://radosxrf.com/) as the [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) unit is more flexible with ease of install unlike the [Scantech](https://www.scantech.com.au/) unit. Sample selection should represent the ore types, <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s and grade ranges of material tested in Phase 1 trials. This will provide [RADOS](https://radosxrf.com/) with an opportunity to perform <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of their sensor and examine the implication of <b title=\"Subjective term for the smaller sized component of feed\">fines</b> [segregation](https://en.wikipedia.org/wiki/Particle_segregation) on the [bulk ore sorting](/pages/wikiore-bulk-sorting) conveyor prior to commissioning of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.The current design of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant segregates <b title=\"Subjective term for the larger sized component of feed\">coarse</b> and fine material on the [bulk ore sorting](/pages/wikiore-bulk-sorting) convey by screening <b title=\"Subjective term for the smaller sized component of feed\">fines</b> prior to sizing <b title=\"Subjective term for the larger sized component of feed\">coarse</b> material. If ore types exhibit a [natural deportment](/pages/wikiore-natural-deportment) response, this [segregation](https://en.wikipedia.org/wiki/Particle_segregation) of <b title=\"Subjective term for the larger sized component of feed\">coarse</b> and fine material will place higher grade <b title=\"Subjective term for the smaller sized component of feed\">fines</b> on the bottom of the [bulk ore sorting](/pages/wikiore-bulk-sorting) conveyor. The on-belt [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) bulk sensor is takes surface base readings of the material on the conveyor, which may result in a biased grade measurement if higher grade <b title=\"Subjective term for the smaller sized component of feed\">fines</b> are covered with lower grade <b title=\"Subjective term for the larger sized component of feed\">coarse</b> material on the conveyor. The impact of <b title=\"Subjective term for the smaller sized component of feed\">fines</b> [segregation](https://en.wikipedia.org/wiki/Particle_segregation) should be assessed prior to commissioning of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant by repeat analysis of the same sample with:\n\n<b title=\"Subjective term for the smaller sized component of feed\">fines</b> on top of <b title=\"Subjective term for the larger sized component of feed\">coarse</b> material,  \n<b title=\"Subjective term for the larger sized component of feed\">coarse</b> on top of fine material, and\n\n1.  Mixed <b title=\"Subjective term for the larger sized component of feed\">coarse</b> and <b title=\"Subjective term for the smaller sized component of feed\">fines</b> material.\n\nIf a systematic bias is observed, then this may be corrected in the sensor measurement algorithm prior to commissioning. If a random bias is observed, a decision to temporarily plate off the <b title=\"Subjective term for the smaller sized component of feed\">fines</b> bypass screen during Phase 1 trials may be required to determine the impact on sensor performance.\n\n[natural deportment](/pages/wikiore-natural-deportment)  \nThe [bulk ore sorting](/pages/wikiore-bulk-sorting) plant can incorporate a fixed aperture screen in the flop gate actuation mechanism of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant. This screen would be used to recover higher grade <b title=\"Subjective term for the smaller sized component of feed\">fines</b> from all material treated at the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant. To assess the optimal screen size to incorporate in the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant requires assessment of the [natural deportment](/pages/wikiore-natural-deportment) response across ore types. The assessment of [natural deportment](/pages/wikiore-natural-deportment) can take place prior to the commissioning of the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant by collecting and screening meso-scale samples (~500kg) from <b title=\"Exit point from current pit.\">ex-pit</b> and [stockpiles](https://en.wikipedia.org/wiki/Stockpile). Sample selection should consist of a minimum of 10 samples from each ore type, <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> and stockpile represented in Phase 1 trials. These samples would be screened, and resulting <b title=\"Classified material based on specific size constraints (i.e. two specific sizes).\">size fraction</b>s [assay](https://en.wikipedia.org/wiki/Assay)ed, to determine the strength of [natural deportment](/pages/wikiore-natural-deportment) responses and allow estimation of appropriate <b title=\"Minimum dimension at which material will be retained as oversize.\">screen aperture</b> in the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant prior to commissioning.\n\n  \n\nExperimental Phase 1: Calibration, Proving the Technology and Proving Separation[](#Experimental_Phase_1:_Calibration_Proving_the_Technology_and_Proving_Separation)\n--------------------------------------------------------------------------------------------------------------------------------------------------------------------\n\nPhase 1 of the experimental design consists of:\n\n*   Experimental Phase 1a: Calibration of the sensors\n*   Experimental Phase 1b: Proving the technology\n*   Experimental Phase 1c: Proving separation\n*   Experimental Phase 1d: <b title=\"Term for operational limitations imposed within preconcentration activities.\">minimum separation capability</b>\n*   Experimental Phase 1e: Develop Yield-Response Curves\n\n  \n\n### Experimental Phase 1a: Calibration of the Sensors[](#Experimental_Phase_1a:_Calibration_of_the_Sensors)\n\nCalibration of the sensors will be performed by [Scantech](https://www.scantech.com.au/) and [RADOS](https://radosxrf.com/) upon commissioning of the intermediate conveyor for the <b title=\"Bulk Ore Sorter\">BOS</b> plant. Following this, the <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> and initial assessment of the sensor performance can be tested using the samples prepared during laboratory calibration of the sensors and any additional well characterised samples from <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> (ore and <b title=\"Material void of any valuable elements.\">barren</b> waste).\n\n### Dynamic Calibration of Scantech Geoscan PGNAA[](#Dynamic_Calibration_of_Scantech_Geoscan_PGNAA)\n\nThe <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of the [Scantech](https://www.scantech.com.au/) [Geoscan](https://www.geoscan.com.au/) [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) sensor can be performed as follows:\n\n1.  Place 5-6m of 20kg sample bags of known known elemental grades (Cu, Ni and others) on the intermediate conveyor before the sensor and a bulker bag at the end of the intermediate conveyor (minimum 100kg/metre).\n2.  Turn on the sensor and Run the intermediate conveyor at its slowest setting. A sufficient quantity of sample bags must be placed on the intermediate conveyor to achieve a minimum 30 seconds <b title=\"Length of time for continual measurement in sensor applications before a destination is determined.\">integration time</b> for the sample.\n3.  Turn off the sensor and intermediate conveyor.\n4.  Record and compare the known elemental grades (Cu, Ni and others) of the samples to the measured elemental grades of the sensor.\n5.  Repeat the experiment with different combinations of sample bags to cover the calibration range of the sensor for elements of interest. Additional sample bags of well characterised HGO or <b title=\"Material void of any valuable elements.\">barren</b> <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> from <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> drilling or <b title=\"Subjective term for the larger sized component of feed\">coarse</b> [assay](https://en.wikipedia.org/wiki/Assay) rejects can be used to adjust the elemental grades presented to the sensor.\n\n  \n\n### Dynamic Calibration of RADOS XRF[](#Dynamic_Calibration_of_RADOS_XRF)\n\n<b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of the [RADOS](https://radosxrf.com/) [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) <b title=\"Positional placement of sensors to capture information about belt feed material.\">on-belt sensor</b> would ideally be performed prior to commission. If this is not possible, <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of the [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensor may be performed using the procedure described above with samples placed in open containers instead of sample bags. The impact of <b title=\"Subjective term for the larger sized component of feed\">coarse</b> and fine [segregation](https://en.wikipedia.org/wiki/Particle_segregation) on the [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensor can also be examined using the procedure described in the section [RADOS](https://radosxrf.com/) [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) “Offline Calibration Jig” and any adjustments to the equipment or sensor algorithm can be made prior to complete commissioning of the <b title=\"Bulk Ore Sorter\">BOS</b> plant.\n\n  \n\n### Experimental Phase 1b: Proving the Technology - Precision and Accuracy[](#Experimental_Phase_1b:_Proving_the_Technology_-_Precision_and_Accuracy)\n\nExperimental Phase 1b will assess the precision (repeatability) and accuracy (closeness to [assay](https://en.wikipedia.org/wiki/Assay) results) of sensor measurements for Cu, Ni and other measured elements of significance to the development of the sorting algorithm. This assessment of precision and accuracy does not apply to [PGE](https://en.wikipedia.org/wiki/Platinum_group) grade. However, the data captured during the Experimental Phase will assist in the development of a sorting algorithm to maximise [PGE](https://en.wikipedia.org/wiki/Platinum_group) grade and the <b title=\"Sensor specific controls that are adjusted based on feed material types.\">dynamic calibration</b> of the sensors.\n\n#### Experimental Phase 1b: Sample Selection Matrix[](#Experimental_Phase_1b:_Sample_Selection_Matrix)\n\nThe <b title=\"Multi-dimensional selection of target samples based on key properties.\">sample selection matrix</b> for Phase 1b is presented below. The sample matrix consists of combinations of the two most dominant ore types (pyroxenite and Feldspathic Pyroxenite, two highest correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s and three grade ranges. Additional samples include VLGO and LGO stockpiled ore and the deleterious ore types Calc Silicate and Serpentised Pyroxenite. If information is available for the ore type and <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> of VLGO and LGO Stockpile samples, sample priority should be for the most dominant ore types (Pyroxenite or Feldspathic Pyroxenite) and highest correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s (<b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> 31, 41 or 5). Similarly, if the deleterious ore types are available in the mine plan, sample priority should be for <b title=\"Exit point from current pit.\">ex-pit</b> material from the highest correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s (<b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> 31, 41 or 5). A total of 16 samples, each the volume of one [truck](https://en.wikipedia.org/wiki/Haul_truck) (~300t), will be required for Experimental Phase 1b.\n\n  \n\n#### Experimental Phase 1b: Procedure for Precision and Accuracy[](#Experimental_Phase_1b:_Procedure_for_Precision_and_Accuracy)\n\nThe precision and accuracy of sensor measurements can be assessed using the following procedure.For each sample in Table 1‑1:\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant, turn off the <b title=\"Material entering a predetermined system.\">feed</b>er and ensure the screen in the actuation device is plated off.\n2.  Load half a bucket of the FEL with the sample and place in <b title=\"Bulk Ore Sorter\">BOS</b> [hopper](https://en.wikipedia.org/wiki/Hopper_%28particulate_collection_container%29).\n3.  Reposition FEL to receive the sample once it has passed through the <b title=\"Bulk Ore Sorter\">BOS</b> plant.\n4.  Set the conveyor speed to ensure a minimum sample reading of 30s for the sensors.\n5.  Start the <b title=\"Bulk Ore Sorter\">BOS</b> Plant and record the signals from the [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) and [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensors.\n6.  Collect the entire sample in the FEL and record the mass of the sample from the <b title=\"Device used to weigh material on a conveyor belt.\">Weightometer</b> measurement of the intermediate conveyor.\n7.  Turn off the <b title=\"Bulk Ore Sorter\">BOS</b> plant apron <b title=\"Material entering a predetermined system.\">feed</b>er and conveyors.\n8.  Reload the sample in the <b title=\"Bulk Ore Sorter\">BOS</b> [hopper](https://en.wikipedia.org/wiki/Hopper_%28particulate_collection_container%29)\n9.  Repeat Steps 3-8 for 10 consecutive readings of the same sample. If sample mass readings deviate by more than 5% from original mass, discard the current sample and begin the procedure again from Step 1.\n10.  Upon 10 consecutive readings of the same sample and a sample mass deviation <5% from original mass, load the sample into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n\n  \n\nExperimental Phase 1c: Proving the Sensors Can Drive Separation[](#Experimental_Phase_1c:_Proving_the_Sensors_Can_Drive_Separation)\n-----------------------------------------------------------------------------------------------------------------------------------\n\nThis Experimental Phase will assess the ability of the <b title=\"Bulk Ore Sorter\">BOS</b> plant to sense and separate induced (artificially created) and “as delivered” heterogeneous <b title=\"Material entering a predetermined system.\">feed</b> . [heterogeneity](/pages/wikiore-heterogeneity) will be induced in <b title=\"Bulk Ore Sorter\">BOS</b> plant <b title=\"Material entering a predetermined system.\">feed</b> by alternating <b title=\"Material void of any valuable elements.\">barren</b> <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> (containing no Cu, Ni or PGEs) with MGO or HGO. Delivered [heterogeneity](/pages/wikiore-heterogeneity) will be assessed from<b title=\"Run of mine\">ROM</b> ore identified with high and low insitu [heterogeneity](/pages/wikiore-heterogeneity) from spatial analysis of <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> [assay](https://en.wikipedia.org/wiki/Assay)s. The ability of the <b title=\"Bulk Ore Sorter\">BOS</b> plant to sense and separate deleterious ore types will also be assessed. This will be achieved by alternating deleterious ore types with dominant ore types in the <b title=\"Material entering a predetermined system.\">feed</b> to the <b title=\"Bulk Ore Sorter\">BOS</b> plant. The delivered [heterogeneity](/pages/wikiore-heterogeneity) within deleterious ore types and VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile) will also be assessed. The results will help identify sensing and sorting opportunities and the use of insitu [heterogeneity](/pages/wikiore-heterogeneity) as a predictor for <b title=\"Bulk Ore Sorter\">BOS</b> plant performance.\n\n### Experimental Phase 1c: Sample Selection Matrix[](#Experimental_Phase_1c:_Sample_Selection_Matrix)\n\n#### Induced Heterogeneity[](#Induced_Heterogeneity)\n\nThe <b title=\"Multi-dimensional selection of target samples based on key properties.\">sample selection matrix</b> for induced [heterogeneity](/pages/wikiore-heterogeneity) is presented in Table 1‑2. The samples consist of <b title=\"Material void of any valuable elements.\">barren</b> waste, MGO or HGO from two dominant ore types (Pyroxenite and Feldspathic Pyroxenite) and deleterious ores (Calc Silicate and Serpentised Pyroxenite).\n\n#### Delivered Heterogeneity[](#Delivered_Heterogeneity)\n\nThe <b title=\"Multi-dimensional selection of target samples based on key properties.\">sample selection matrix</b> for delivered [heterogeneity](/pages/wikiore-heterogeneity) is presented in Table 1‑3. The samples consist of combinations of high and low insitu [heterogeneity](/pages/wikiore-heterogeneity) for the two dominant ore types (Pyroxenite and Feldspathic Pyroxenite) across two <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s. Additional samples to assess the delivered [heterogeneity](/pages/wikiore-heterogeneity) of deleterious ores (Calc Silicate and Serpentised Pyroxenite) and the VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile) are included.\n\n### Experimental Phase 1c: Procedure[](#Experimental_Phase_1c:_Procedure)\n\n#### Induced Heterogeneity[](#Induced_Heterogeneity_2)\n\nFor each combination of:\n\n*   <b title=\"Material void of any valuable elements.\">barren</b> <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> and Pyroxenite\n*   <b title=\"Material void of any valuable elements.\">barren</b> <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> and Feldspathic Pyroxenite\n*   Pyroxenite and Calc Silicate\n*   Pyroxenite and Serpentised Pyroxenite\n*   Feldspathic Pyroxenite and Calc Silicate\n*   Feldspathic Pyroxenite and Serpentised Pyroxenite\n\nPerform the following steps:\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant, setup the plant to separate based on 30s sensor signal and ensure the screen in the actuation device is plated off.\n2.  Alternate 1 bucket of ore sample with 1 bucket of <b title=\"Material void of any valuable elements.\">barren</b> <b title=\"Material determined to be below a predetermined grade or economic threshold.\">waste</b> or deleterious ore in the <b title=\"Material entering a predetermined system.\">feed</b> to the <b title=\"Bulk Ore Sorter\">BOS</b> plant.\n3.  Repeat step 2, 20 times.\n4.  Survey [stockpiles](https://en.wikipedia.org/wiki/Stockpile).\n5.  Load the accept stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n6.  Load the reject stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n7.  Break the <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> of the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) and <b title=\"Material entering a predetermined system.\">feed</b> through <b title=\"Bulk Ore Sorter\">BOS</b> plant without any separation.\n8.  Load the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n\n  \n\n#### Delivered Heterogeneity[](#Delivered_Heterogeneity_2)\n\nFor each sample in Table 1‑3:\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant, setup the plant to separate based on 30s sensor signal and ensure the screen in the actuation device is plated off.\n\n<b title=\"Material entering a predetermined system.\">feed</b> each sample into the <b title=\"Bulk Ore Sorter\">BOS</b> plant (~600t).\n\n1.  Survey the accept, reject and [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> [stockpiles](https://en.wikipedia.org/wiki/Stockpile).\n2.  Load the accept stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n3.  Load the reject stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n4.  Break the <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> of the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) and <b title=\"Material entering a predetermined system.\">feed</b> through <b title=\"Bulk Ore Sorter\">BOS</b> plant without any separation.\n5.  Load the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n\n  \n\nExperimental Phase 1d: Minimum Separation Capability[](#Experimental_Phase_1d:_Minimum_Separation_Capability)\n-------------------------------------------------------------------------------------------------------------\n\nThe [RADOS](https://radosxrf.com/) [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) <b title=\"Positional placement of sensors to capture information about belt feed material.\">on-belt sensor</b> takes 5 measurements every second with a minimum sensor <b title=\"Length of time for continual measurement in sensor applications before a destination is determined.\">integration time</b> of approximately 2 seconds while the [Scantech](https://www.scantech.com.au/) [Geoscan](https://www.geoscan.com.au/) [PGNAA](https://en.wikipedia.org/wiki/Prompt_gamma_neutron_activation_analysis) sensor has a minimum <b title=\"Length of time for continual measurement in sensor applications before a destination is determined.\">integration time</b> of 30 seconds. However, The <b title=\"Term for operational limitations imposed within preconcentration activities.\">minimum separation capability</b> is likely to be determined by the minimum actuation time of the <b title=\"Bulk Ore Sorter\">BOS</b> plant (5-7 seconds). This Experimental Phase evaluates the <b title=\"Term for operational limitations imposed within preconcentration activities.\">minimum separation capability</b> of the <b title=\"Bulk Ore Sorter\">BOS</b> plant using the [RADOS](https://radosxrf.com/) [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) <b title=\"Positional placement of sensors to capture information about belt feed material.\">on-belt sensor</b> measurements at the minimum actuation time. The Experimental Phase will try to separate the highest (and lowest) 10%, 25% and 50% of measured [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) readings informed by previous [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) measurements of the sample. The results will assist in the evaluation of sensor integration and the development of sorting algorithms to maximise [PGE](https://en.wikipedia.org/wiki/Platinum_group) grade.\n\n### Experimental Phase 1d: Sample Selection Matrix[](#Experimental_Phase_1d:_Sample_Selection_Matrix)\n\nThe sample selection will use one of the dominant ore types from the most consistent Ni and Cu to [PGE](https://en.wikipedia.org/wiki/Platinum_group) correlation <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b>s with high insitu grade [heterogeneity](/pages/wikiore-heterogeneity) and a sample from either the LGO or VLGO stockpile, as described in Table 1‑4.\n\n### Experimental Phase 1d: Procedure[](#Experimental_Phase_1d:_Procedure)\n\nFor each sample in Table 4, set the [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensor accept thresholds (based on the distribution of all previous [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) measurements for each sample), to separate each of the following:\n\n*   The highest 10% of ore\n*   The highest 25% of ore\n*   The highest/lowest 50% of ore\n*   The lowest 25% of ore\n*   The lowest 10% of ore\n\nUsing the following procedure:\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant, setup the plant to separate based on minimum actuation time and ensure the screen in the actuation device is plated off.\n2.  Set the [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) sensor threshold.\n3.  Run 300 tonnes of the sample through the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.\n4.  Survey the accept, reject and [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> [stockpiles](https://en.wikipedia.org/wiki/Stockpile).\n5.  Load the accept stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n6.  Load the reject stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n7.  Break the <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> of the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) and <b title=\"Material entering a predetermined system.\">feed</b> through <b title=\"Bulk Ore Sorter\">BOS</b> plant without any separation.\n8.  Load the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n9.  Repeat for each combination of sample and [XRF](https://en.wikipedia.org/wiki/X-ray_fluorescence) accept threshold.\n\n  \n\nExperimental Phase 1e: Integrated Screening and Sorting Yield ResponseCurves[](#Experimental_Phase_1e:_Integrated_Screening_and_Sorting_Yield_ResponseCurves)\n-------------------------------------------------------------------------------------------------------------------------------------------------------------\n\nDevelop the yield-<b title=\"Curve generated by plotting response factors across sizes.\">Response Curve</b> for the dominant ore types, different grade categories and VLGO and LGO [stockpiles](https://en.wikipedia.org/wiki/Stockpile). The yield-<b title=\"Curve generated by plotting response factors across sizes.\">Response Curve</b> is developed by varying the [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) value for the sensor algorithm for each sample to assess changes to the quantity and grade of the accept and <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b>s of the <b title=\"Bulk Ore Sorter\">BOS</b> Plant. The integration of an appropriate screening aperture in the actuation gate of the <b title=\"Bulk Ore Sorter\">BOS</b> plant can be assessed during this Experimental Phase using the preliminary test work and confirmation test work for [natural deportment](/pages/wikiore-natural-deportment) of ore types. The results from this Experimental Phase will assists in the development of optimised sorting strategies. **_CRCORE has assumed that adequate [natural deportment](/pages/wikiore-natural-deportment) (Screening) testwork has been completed in Phase 0. If not, then an additional testwork phase will be required to quantify the effects of [natural deportment](/pages/wikiore-natural-deportment) at the separation actuation gate. This work has not been included in the Experimental Design or schedule._**\n\n### Experimental Phase 1e: Sample Selection Matrix[](#Experimental_Phase_1e:_Sample_Selection_Matrix)\n\nSample selection should initially focus on ore types that display the best correlation, demonstrated [heterogeneity](/pages/wikiore-heterogeneity) and [natural deportment](/pages/wikiore-natural-deportment) response. Aim is to work from the best responding ore types, and strategically important [stockpiles](https://en.wikipedia.org/wiki/Stockpile), and transition to more complex ore types once the technology and separation principles are well characterised and understood.\n\n#### Experimental Phase 1e: Procedure[](#Experimental_Phase_1e:_Procedure)\n\nFor each sample in Table 1‑5, apply each of the following sorting [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) grades:\n\n*   All [mineralisation](https://en.wikipedia.org/wiki/Mineralization_%28geology%29) (anything >0 <b title=\"Grams per tonne\">g/t</b> PGE)\n*   Low grade (>1 <b title=\"Grams per tonne\">g/t</b> PGE)\n*   Med grade (>2 <b title=\"Grams per tonne\">g/t</b> PGE)\n*   High grade (>3 <b title=\"Grams per tonne\">g/t</b> PGE)\n\nUsing the following steps:\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant and ensure the optimal <b title=\"Minimum dimension at which material will be retained as oversize.\">screen aperture</b> is active in the actuation device.\n2.  Set the sorting [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) grade.\n3.  Run 600 tonnes of the sample through the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.\n4.  Survey the accept, reject and [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> [stockpiles](https://en.wikipedia.org/wiki/Stockpile).\n5.  Load the accept stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n6.  Load the reject stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n7.  Break the <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> of the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) and <b title=\"Material entering a predetermined system.\">feed</b> through <b title=\"Bulk Ore Sorter\">BOS</b> plant without any separation.\n8.  Load the [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n9.  Repeat for each combination of sample and sorting [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) grade.\n\n  \n\nExperimental Phase 2: Demonstrate Production and Campaign at Processing Plant[](#Experimental_Phase_2:_Demonstrate_Production_and_Campaign_at_Processing_Plant)\n===============================================================================================================================================================\n\nPhase 2 of the experimental design consists of:\n\n*   Experimental Phase 2a: Demonstrate Production\n*   Experimental Phase 2b: Campaign at Processing Plant (Baobab)\n\n  \n\nExperimental Phase 2a: Demonstrate Production[](#Experimental_Phase_2a:_Demonstrate_Production)\n-----------------------------------------------------------------------------------------------\n\nDemonstrate production and separation performance of the <b title=\"Bulk Ore Sorter\">BOS</b> plant. The initial production rate target for the <b title=\"Bulk Ore Sorter\">BOS</b> plant is 500tph, ramping up to demonstrate 1000tph. The results of this Experimental Phase will establish the production capacity of the <b title=\"Bulk Ore Sorter\">BOS</b> plant and separation performance for one ore type and <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> . There will be significant risk in using this result to develop a <b title=\"Bulk Ore Sorter\">BOS</b> [response factor](/sub-topics/natural-deportment-characterisation) to relate to insitu [heterogeneity](/pages/wikiore-heterogeneity). However, it will provide a starting point to evolve the link between insitu [heterogeneity](/pages/wikiore-heterogeneity) and the <b title=\"Bulk Ore Sorter\">BOS</b> response as additional samples are evaluated over time.\n\n### Experimental Phase 2a: Sample Selection Matrix[](#Experimental_Phase_2a:_Sample_Selection_Matrix)\n\nSample selection to demonstrate production, separation performance and ultimately campaign though the Baobab processing plant, should select the best performing ore type, <b title=\"Geological, statistical or spatial groupings used for modelling.\">domain</b> and grade range from analysis to date. The sample would ideally represent 100% of a dig<b title=\"A spatially constrained unit within the resource model.\">block</b> which will allow some level of reconciliation from the insitu <b title=\"Stage at which final boundaries between ore and waste are calculated.\">grade control</b> [block model](https://en.wikipedia.org/wiki/Mineral_resource_estimation#Resource_block_model) defined [heterogeneity](/pages/wikiore-heterogeneity), to the actual “delivered and separated” [heterogeneity](/pages/wikiore-heterogeneity). The quantity of material required would correspond to the generation of an <b title=\"Valuable component separated from feed material in preconcentration applications.\">accept stream</b> of 42kt to allow 14 days of continuous processing through the Baobab plant (capacity of 3kt per day).\n\n### Experimental Phase 2a: Procedure[](#Experimental_Phase_2a:_Procedure)\n\n1.  Turn on [bulk ore sorting](/pages/wikiore-bulk-sorting) Plant and ensure the optimal <b title=\"Minimum dimension at which material will be retained as oversize.\">screen aperture</b> is active in the actuation device.\n2.  Set the sorting [cut-off](/sub-topics/scheduling-and-cut-off-optimisation) grade.\n3.  Run the sample through the [bulk ore sorting](/pages/wikiore-bulk-sorting) plant.\n4.  At the end of each day:\n5.  Survey the accept, reject and [grizzly](https://en.wikipedia.org/wiki/Trommel_screen#Grizzly_screen) <b title=\"Material above a specific size (generally used to define material that is retained on a screen deck).\">oversize</b> [stockpiles](https://en.wikipedia.org/wiki/Stockpile).\n6.  Load the accept stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n7.  Load the reject stockpile into the [crushing](https://en.wikipedia.org/wiki/Crusher) plant for sample collection and [assay](https://en.wikipedia.org/wiki/Assay).\n8.  Store crushed accept and reject [stockpiles](https://en.wikipedia.org/wiki/Stockpile) for processing at Baobab.\n9.  Repeat until 42kt of <b title=\"Valuable component separated from feed material in preconcentration applications.\">accept stream</b> is generated or the sample is depleted.\n\n  \n\nExperimental Phase 2b: Campaign at Processing Plant[](#Experimental_Phase_2b:_Campaign_at_Processing_Plant)\n-----------------------------------------------------------------------------------------------------------\n\nConfirm production and separation performance of the <b title=\"Bulk Ore Sorter\">BOS</b> plant by campaigning the accept and <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b>s through the Baobab processing plant. The campaign should target a minimum duration of 2 weeks for <b title=\"Valuable component separated from feed material in preconcentration applications.\">accept stream</b> . Consideration should also be given to processing considerable volumes of the <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b> , as this will be the ultimate representation of the <b title=\"Bulk Ore Sorter\">BOS</b> capability. The <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b> may be in the order of 1-2 weeks, depending on the advice of adequate processing time required to “flush out” the system and still provide reliable metal accounting results.\n\n**_The results of this Experimental Phase will confirm [PGE](https://en.wikipedia.org/wiki/Platinum_group) production and separation performance of the <b title=\"Bulk Ore Sorter\">BOS</b> plant._**\n\n  \n\nSampling[](#Sampling)\n=====================\n\nSampling for the <b title=\"Bulk Ore Sorter\">BOS</b> project is critical. The sampling provides control for all stages of Phase 1 from the initial calibration and accuracy measurements, through to the development of the the separation and yield <b title=\"Curve generated by plotting response factors across sizes.\">Response Curve</b>s. In practice, sampling during the Phase 2 is for confidence and monitoring performance, rather than short term interval control. The material will have been processed and any “modifications” to the separation algorithm may be inappropriate and may simply represent the variability expected in a natural system, particularly when sorting on proxies rather than the elements desired.\n\n  \n\nCrushing and Sampling[](#Crushing_and_Sampling)\n===============================================\n\nOriginally a cross belt sampling tower was considered to be installed for the <b title=\"Bulk Ore Sorter\">BOS</b> project, but has now been discontinued. Due to the speed of operations large sample volumes were required due to the <b title=\"Largest size material in a feed stream.\">topsize</b> being in greater than 150mm, as well as the difficulty in obtaining samples from the cross belt sampler when running at low speeds.\n\nIt has been proposed to install a mobile [jaw crusher](https://en.wikipedia.org/wiki/Crusher#Jaw_crusher) and sequential 2 stage [cone crusher](https://en.wikipedia.org/wiki/Crusher#Cone_crusher)s to <b title=\"Material entering a predetermined system.\">feed</b> both Phase 1 and Phase 2 samples into to comminute them down to <16mm. This material would then be [subsample](https://en.wikipedia.org/wiki/Sub-sampling_%28chemistry%29)d in free fall with a rotating vezin sampler supplied by Multotec. The Baobab plant requires a pre-crushed ore delivery of approximately 100% passing 16mm. [crushing](https://en.wikipedia.org/wiki/Crusher) the accept and <b title=\"Low value component separated from feed material in preconcentration applications.\">reject stream</b>s from the <b title=\"Bulk Ore Sorter\">BOS</b> plant utilising sites current [secondary crush](https://en.wikipedia.org/wiki/Crusher)ers was deemed impractical (logistically as well as for sample confidence). With a top size of approximately 16mm it is anticipated that sample masses in the order of 100’s of kg per shift will be adequate (200-300kg?), though this will need to be confirmed by site sampling specialists who has access to [PGE](https://en.wikipedia.org/wiki/Platinum_group) [particle size](https://en.wikipedia.org/wiki/Particle_size) and grade data.\n\nWhile technically very small samples (kg’s to 10’s kg) may be adequate for Phase 1 testing of 5 or 10t lots, in practice the [subsample](https://en.wikipedia.org/wiki/Sub-sampling_%28chemistry%29)d mass should be “up sized” to reach the maximum volume that can be practically handled and split through either rotary (preferred) or [riffle split](https://en.wikipedia.org/wiki/Riffle_splitter)ters. This sample should be split down to sample masses that are then suitable for despatch to laboratory services for pulverisation and [assay](https://en.wikipedia.org/wiki/Assay)"},"organisations":[],"embeds":{"citations":[],"imageAssets":[]},"video":null,"banner":null,"fileAssets":[],"citations":[],"feedEntries":[],"posts":[],"moderators":[]}}},"pageContext":{"lang":{"id":"en","path":"","iso":"en","name":"English","label":"English"},"availableEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend","OrganisationType","HorizonType","Economy","FeedEntry","Video","Citation","Objective","ProfileType","ExpertiseLevel"],"detailEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend"],"site":{"id":"65d2edd1ebf7bb9388ffb0df","slug":"connect-ore","name":"ConnectOre","url":"https://connectore.org","title":"ConnectOre","twitter":null,"threads":null,"facebook":null,"linkedin":null,"instagram":null,"flickr":null,"tiktok":null,"youtube":null,"ownerName":"ICAA","recaptchaKey":"6LfG2J0qAAAAAHDCFfJnrWOj6DiWJGik5BAa_7p8","googleSiteVerification":null,"platformName":"ConnectOre","platformUrl":"https://platform.connectore.org","supportEmail":null,"contactEmail":null,"mainMenu":{"id":"65d2edaaebf7bb9388ffaf79","slug":"website-navigation"},"linearMenu":null,"entityViews":[{"id":"67528c24c135ebcfc668f1ba_65d2edd1ebf7bb9388ffb0df","name":"Value Chain","hash":"value-chain","label":null,"slug":"value-chain","count":0,"showCount":null,"disabled":null,"icon":{"id":"6752a61b8b51dfa7b77b1e37","name":"Connections Navigator Icon Glyph","slug":"connections-navigator-icon-glyph","component":"ConnectionsNavigatorIconGlyph"},"childEntityTypes":[{"id":"6667fa4ff794dd6e045135c1","name":"Value Chain Theme","internalName":"Trend"},{"id":"6667fa58f794dd6e045135c6","name":"Topic","internalName":"Topic"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"6757ef1ede8adbd45cf19474_65d2edd1ebf7bb9388ffb0df","name":"Bulletin Board","hash":"bulletin-board","label":null,"slug":"bulletin-board","count":0,"showCount":null,"disabled":null,"icon":{"id":"681c2cebbccc5a72d8382f31","name":"Tag Icon","slug":"tag-icon","component":"TagDotIconGlyph"},"childEntityTypes":[],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528d88c135ebcfc668f31b_65d2edd1ebf7bb9388ffb0df","name":"Innovations","hash":"innovations","label":null,"slug":"innovations","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528d74c135ebcfc668f315","name":"Innovation","internalName":"innovation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67625640fbc7c50d8644c592_65d2edd1ebf7bb9388ffb0df","name":"Community","hash":"community","label":null,"slug":"community","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528404c135ebcfc668ee1c","name":"Person","internalName":"Person"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528e1bc135ebcfc668f33a_65d2edd1ebf7bb9388ffb0df","name":"Stakeholder Map","hash":"stakeholder-map","label":null,"slug":"stakeholder-map","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"66680141f794dd6e0451367a","name":"Organisation","internalName":"Organisation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67529040c135ebcfc668f4ae_65d2edd1ebf7bb9388ffb0df","name":"References","hash":"references","label":null,"slug":"references","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"6752902fc135ebcfc668f4a4","name":"Article","internalName":"FeedEntry"},{"id":"67529039c135ebcfc668f4aa","name":"Citation","internalName":"Citation"},{"id":"67528de9c135ebcfc668f328","name":"Catalyst","internalName":"catalyst"},{"id":"67528df9c135ebcfc668f32d","name":"Page","internalName":"page"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]}],"entityAppViews":[],"entityOnboardingViews":[{"id":"680c3a4ebc80e4d0f3cfa2ef_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Step","hash":"trend-expertise-step","label":null,"slug":"trend-expertise-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Onboarding Grid","slug":"trend-expertise-onboarding-grid","label":null,"updated":"2025-04-26T01:42:10.20","layout":{"id":"680c3993bc80e4d0f3cfa2dd","name":"Slice Onboarding Trend Expertise Grid","slug":"slice-onboarding-trend-expertise-grid","component":"SliceLayoutOnboardingTrendExpertiseGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":null,"titleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_titleRich","text":"Are you **an industry expert** in any of these Value Chain Themes?"}}]},{"id":"680c3a85bc80e4d0f3cfa2fa_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Step","hash":"profile-types-step","label":null,"slug":"profile-types-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Onboarding Grid","slug":"profile-types-onboarding-grid","label":null,"updated":"2025-04-26T01:44:34.63","layout":{"id":"680c3a13bc80e4d0f3cfa2e4","name":"Slice Onboarding Profile Types Grid","slug":"slice-onboarding-profile-types-grid","component":"SliceLayoutOnboardingProfileTypesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"Which best describes you?","titleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]},{"id":"680c3aaabc80e4d0f3cfa2ff_65d2edd1ebf7bb9388ffb0df","name":"Objectives Step","hash":"objectives-step","label":null,"slug":"objectives-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df","name":"Objectives Onboarding Grid","slug":"objectives-onboarding-grid","label":null,"updated":"2025-04-26T01:45:12.76","layout":{"id":"680c3a3fbc80e4d0f3cfa2ea","name":"Slice Onboarding Objectives Grid","slug":"slice-onboarding-objectives-grid","component":"SliceLayoutOnboardingObjectivesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"What are your priority objectives?","titleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]}],"gptLanguages":[{"id":"65d2eda5ebf7bb9388ffaf1f","name":"English","slug":"english","iso":"en","locale":"en_US","path":"/en","label":"English","menuLabel":null},{"id":"666f70b6e051ad9ef086d1be","name":"Arabic","slug":"arabic","iso":"ar","locale":"ar_AE","path":"/ar","label":"عربي","menuLabel":null},{"id":"666f7161e051ad9ef086d1c4","name":"Spanish","slug":"spanish","iso":"es","locale":"es_ES","path":"/es","label":"español","menuLabel":null},{"id":"666f71c9e051ad9ef086d1c8","name":"German","slug":"german","iso":"de","locale":"de_DE","path":"/de","label":"Deutsch","menuLabel":null},{"id":"65d2eda5ebf7bb9388ffaf20","name":"French","slug":"french","iso":"fr","locale":"fr_FR","path":"/fr","label":"Français","menuLabel":null}],"gptQuestionTemplate":{"id":"662c7f6e81ef1920e3638518","name":"Standard Open Question","slug":"standard-open-question","path":"/prompt-templates/standard-open-question","__typename":"PromptTemplate","_entityTypeName":null,"label":"CopperAI","type":{"id":"662c7f1981ef1920e363850f","name":"Ask","slug":"ask"},"description":{"text":"This template is tailored for providing accurate responses based on specific context. It integrates contextual details from \"contextual information\" and addresses the \"target question\". The response is always in English, prioritizing clarity. If the answer is unknown, the template openly acknowledges this, ensuring honesty and avoiding speculation. This format is ideal for precise, context-sensitive, and truthful answering."},"summary":{"text":"Ask a general question about Website content"},"gptModel":{"id":"67564c4f2f6749787d0e03dc","name":"OpenAI GPT 4o","slug":"open-ai-gpt-4-o","dataSetId":"openai:gpt-4o"},"variablesPrompt":{"text":""},"submitLabel":"Ask","languages":[],"icon":{"id":"67528b9cc135ebcfc668f1a3","name":"AI Lower Case Icon Glyph","slug":"ai-lower-case-icon-glyph","component":"AiLowerCaseIconGlyph"},"variables":[{"id":"6668076bf794dd6e045138d9","name":"question","slug":"question","useVectorStore":true,"label":"What would you like to know?","labelAnother":null,"help":{"text":""},"options":{"text":""},"defaultValue":null,"entityTypes":[],"controlType":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"},"labelContextual":null,"labelAnotherContextual":null,"helpContextual":{"text":""},"optionsContextual":{"text":""},"defaultValueContextual":null,"entityTypesContextual":[],"controlTypeContextual":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"}}]},"advertisements":[],"logoVerticalOffset":null,"logoHorizontalOffset":null,"logoVerticalOffsetMobile":null,"logoHorizontalOffsetMobile":null,"logoVerticalOffsetTablet":null,"logoHorizontalOffsetTablet":null,"logoVerticalOffsetDesktop":null,"logoHorizontalOffsetDesktop":null,"logoHeightMobile":44,"logoHeightTablet":null,"logoHeightDesktop":null,"headerHeightMobile":null,"headerHeightTablet":null,"headerHeightDesktop":null,"logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807465/copper-connect/site/copper-connect_logo__CopperOre_Master_Brand_Identity-colour_cd4vgg.webp","type":"image/webp","width":945,"height":266},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807452/copper-connect/site/copper-connect_logoInverted__CopperOre_Master_Brand_Identity-white_chnucx.webp","type":"image/webp","width":945,"height":266},"footerMenu":null,"footerSecondaryMenu":null,"footerContent":{"text":"© {year} ConnectOre. All Rights Reserved\n"},"creator":null,"poweredBy":{"id":"65d2edadebf7bb9388ffafc8","name":"Shapeable","slug":"shapeable","url":"https://shapeable.ai","logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1674010034/platform/organisation/shapeable_logo__shapeable.png","type":"image/png","width":1174,"height":368},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1729474494/copper-connect/organisation/shapeable_logoInverted__shapeable-logo-inverted_sdcfpk.png","type":"image/png","width":392,"height":118},"logoSubtle":null},"poweredByLabel":null,"poweredByContent":{"text":""},"explorerPage":{"name":"Explorer","title":null,"slug":"explorer","path":"/explorer"},"termsPage":{"name":"Terms of Use","title":null,"slug":"terms-of-use","path":"/terms-of-use"},"homePage":null,"knowledgeHubPage":{"name":"News","title":null,"slug":"news","path":"/news"},"privacyPolicyPage":{"name":"Privacy Policy","title":null,"slug":"privacy-policy","path":"/privacy-policy"},"summary":{"text":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action"},"thumbnail":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"},"openGraph":{"title":"ConnectOre","date":"2026-07-31T04:44:47.80","description":{"plain":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action\n"},"image":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png","type":"image/png","thumbnails":{"full":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"}}}},"termsAndConditions":{"text":""},"privacyPolicy":{"text":"At ConnectOre we respect your privacy. We want to ensure that you get the information, content, and experiences that matter most to you. ConnectOre is committed to protecting the privacy of its stakeholders, communities, and other contacts.\n\n## Scope\n\nThis privacy policy applies to all personal data processed by full-time and part-time employees, volunteers when acting on behalf of ConnectOre contractors and partners doing business on behalf of ConnectOre, as well as all legal entities, all operating locations in all countries, and all business processes conducted by ConnectOre.\n\n## Information Collected\n\n#### What information do we collect?\n\nConnectOre collects the following personal data in line with the use purposes explained in a subsequent section:\n\n  * Your name and contact details\n  * Online profile data/usage\n  * Contact information\n  * Social media profile information\n  * Education and professional information\n  * Registration and participation in ConnectOre events and activities \n  * Information about service usage\n  * Cookies\n  * Authentication data\n  * Location information\n  * Author and peer review information\n  * Other information you upload or provide to us\n\n#### How do we use your information?\n\nConnectOre uses (and, where specified, shares) your personal information for the following purposes:\n\n  * To provide support or other services. ConnectOre may use your personal information to provide you with support or other services that you have ordered or requested. ConnectOre may also use your personal information to respond directly to your requests for information, including registrations for webinars, or other specific requests, or pass your contact information to the appropriate ConnectOre supplier or reseller for further follow-up related to your interests.\n  * To provide information based on your needs and respond to your requests. ConnectOre may use your personal information to provide you with notices of new product releases and service developments.\n  * To administer products. ConnectOre may contact you if you make use of (digital) products we offer, to confirm certain information (for example, that you did not experience problems in a download process). We may also use this information to confirm compliance with licensing and other terms of use and may share it with your company/institution.\n  * To assist in your participation in ConnectOre activities. ConnectOre will communicate with you, if you are participating in certain ConnectOre activities such as ConnectOre Summit, authoring or reviewing a ConnectOre article, or ConnectOre humanitarian activities. ConnectOre may send you information such as update messages related to those activities (such as but not limited to the event's content, and event logistics)\n  * To update you on relevant ConnectOre events and opportunities. ConnectOre may communicate with you regarding relevant ConnectOre events and opportunities.\n  * To protect ConnectOre content and services. We may use your information to prevent potentially illegal activities and to enforce our terms and conditions.\n  * To get feedback or input from you. In order to deliver products and services of most interest to our stakeholders, from time to time, we may ask you to provide us input and feedback (for example through surveys).\n\n#### How can you control your information?\n\nYou can control the information we have about you and how we use as follows:\n\n  * If you are a registered guest for ConnectOre Annual Summit 2021, any request for review, revise or correction of your personal data can be sent to john.fennell@copper.com.au specifying your request.\n\n#### Personal data about minors and children\n\nConnectOre does not knowingly collect data from or about children under 16 without the permission of parent(s)/guardian(s). If we learn that we have collected personal information from a child under 16, we will delete that information as quickly as possible. If you believe that we might have any information from or about a child under age 16, please contact us.\n\n#### How will you know if the Privacy Policy is changed?\n\nConnectOre may update its Privacy Policy from time to time. If we make any material changes you will be notified by means of a notice on our website prior on the date the change becomes effective. We encourage you to periodically review this page for the latest information on our privacy practices.\n\n## Technical And Regulatory Information\n\n#### Logging practices\n\nConnectOre automatically records the Internet Protocol (IP) addresses of visitors. The IP address is a unique number assigned to every computer on the internet. Generally, an IP address changes each time you connect to the internet (it is a \"dynamic\" address). Note, however, that if you have a broadband connection, depending on your individual circumstance, the IP address that we collect may contain information that could be deemed identifiable. This is because, with some broadband connections, your IP address doesn't change (it is \"static\") and could be associated with your personal computer.\n\nAs well as recording the IP addresses of users, ConnectOre may also keep track of sites that users visited immediately prior to visiting ConnectOre's website and the search terms they used to find it. We keep track of the pages visited on ConnectOre's website, the amount of time spent on those pages and the types of searches done on them. Your searches remain confidential and anonymous. ConnectOre uses this information only for statistical purposes to find out which pages users find most useful and to improve the website.\nConnectOre also captures and stores information that you transmit. This may include:\n\n  * Browser/Device type/version\n  * Operating system used\n  * Media Access Control (MAC) address\n  * Date and time of the server request\n  * Volume of data transferred\n\n#### External links behaviour\n\nSome of the links on ConnectOre's websites link to other sites created and maintained by other public- and/or private-sector organizations. ConnectOre provides these links solely for your information and convenience. When you transfer to an outside website, you are leaving ConnectOre domain, and ConnectOre's information management policies no longer apply. ConnectOre encourages you to read the privacy statement of each external website that you visit before you provide any personal data.\n\n#### Cookies and web beacons\n\nCookies and web beacons are electronic placeholders that are placed on your device by websites to track your individual movements on that website over time. ConnectOre uses both session-based cookies (which last only for the duration of the user's session) and persistent cookies (which remain on your device and provide information about the session you are in and waits for the next time you use that site again).\n\nThese cookies and web beacons provide useful information to ConnectOre, enabling us to recognize repeat users, facilitate the user's access to and use of our sites, allows us to track usage behavior, and to balance the usage of our websites on all ConnectOre web servers.\nTracking cookies, third-party cookies, and other technologies such as web beacons may be used to process additional information, enable non-core functionalities on ConnectOre website and enable third-party functions (such as a social media \"share\" link). We may also include web beacons and other similar technology in promotional email messages to determine whether the messages have been opened.\n\n#### Do Not Track (DNT)\n\nThe online advertising industry has self-regulatory initiatives designed to provide consumers a choice in the types of ads they may see online and to conveniently opt-out from online behavioral ads served by some or all of the companies participating in these programs. Our websites do not respond to DNT consumer browser settings.\n\n#### Responses to legal requests\n\nConnectOre reserves the right to share your information to respond to duly authorized information requests of governmental authorities or where required by law.\n\n#### Your data rights\n\nConnectOre complies with all applicable data privacy laws and regulations including, but not limited to, the General Data Protection Regulation (GDPR) and the California Consumer Privacy Act (CCPA). Under these laws and regulations, you may have certain rights to your data. Should you wish to exercise any of these rights, please send an email request to john.fennell@copper.com.au with \"Data Privacy Request'' in the subject line and in the email please identify the specific privacy right you request assistance with. Please note additional information may be requested prior to fulfilling a request and that ConnectOre reserves the right to charge a fee, where permitted, to cover the cost of certain requests.\n\n#### How do I contact you if there is an issue?\nIf you have any questions or concerns about this Privacy Policy or about the use of your personal information, please feel free to contact us by email at john.fennell@copper.com.au"},"welcomeUrl":"https://connectore.org/app/welcome","welcomeTitle":"Welcome to ConnectOre and thanks for joining us! ","invitationAction":"join the ConnectOre community","setupCompletionMessage":null,"languages":[],"brandColors":[],"showLogin":true,"showShareMenu":null,"showFollowMenu":true,"showPlatformLogin":null,"showContactUs":null,"loginLabel":"Explorer Login","platformLoginLabel":"Community Platform","headerButtons":[]},"includeProfile":true,"disableProfileEditing":false,"dynamicEntityTypeNames":["Person","Organisation"],"profilePath":"/app/profile","welcomePath":"/app/welcome","id":"65d2edd7ebf7bb9388ffb167","slug":"designing-bulk-ore-sorting-trials","entityPath":"/sub-topics/designing-bulk-ore-sorting-trials","openGraph":{},"entityTypeName":"SubTopic","name":"Designing Bulk Ore Sorting Trials","updated":"2023-07-27T09:08:21.00","__type":"SubTopic"}},
    "staticQueryHashes": ["1044227382","1158597448","1242646999","1427075558","1452322194","1520036161","1545705019","1586309863","1606754935","1816168740","1864381666","1903214493","1945056504","1989845544","2034981229","2181044613","2409034939","2463401854","2526615987","2642656775","2862279633","2867243664","2910164142","2912920178","296816903","3073584486","3150399266","3172506128","3320076387","3447680494","3453148481","3624873332","364221563","3692255024","3778988535","3782604890","4091857177","4216505212","591477963","701411134","758936535","80004486","857137463","881103158"]}