{
    "componentChunkName": "component---src-gatsby-entities-post-tsx",
    "path": "/posts/desalination-detailed-technology-review",
    "result": {"data":{"platform":{"post":{"id":"65d2edbfebf7bb9388ffb09b","name":"Desalination Detailed Technology Review","slug":"desalination-detailed-technology-review","typeLabel":"Industry Briefing","badge":null,"path":"/posts/desalination-detailed-technology-review","updated":"2024-06-18T01:13:48.55","__typename":"Platform_Post","_schema":{"label":"Post","pluralLabel":"Posts"},"title":null,"pretitle":null,"subtitle":null,"published":"2024-06-18T01:13:48.55","content":{"plain":"Size and structure of the global desalination technology market\nToday there is approximately 100 million m3/d water desalinated globally in all sectors including municipal drinking water and all industrial uses. Estimates vary among sources, and there are constantly new plants coming online, but this rough figure is verified by several sources.1, 2, 3 Large single city municipal desalination plants are in the general range of hundreds of megalitres per day, and the unit of megalitres per day (ML/d) will be used in the rest of this section to provide a consistent comparison of the size and scale of several global municipal desalination plants alongside industrial and copper mining desalination plants. Municipal drinking water represents 59% of the worldwide installed desalination capacity, and total industrial desalination is 36%.4\nFigure 52 - Global desalination applications\n\nExamples of some of the largest municipal and mixed municipal/industrial desalination plants in the world are shown in the table below.\nTable 5: Scale of a few municipal desalination plants\n\n\n\nSite\nCapacity   [ML/d]\n\n\n\nShoaiba, Saudi Arabia\n1,282\n\n\nSorek, Israel\n1,172\n\n\nRas Al Khair, Saudi Arabia\n1,036\n\n\nTaweelah, UAE\n909\n\n\nRabigh, Saudi Arabia\n600\n\n\nFujairah, UAE\n587\n\n\nMelbourne, Australia\n400\n\n\nSydney, Australia\n250\n\n\nTianjin, China\n200\n\n\nCarlsbad, USA\n189\n\n\nEl Paso, USA\n104\n\n\nTampa Bay, USA\n95\n\n\nWithin industrial desalinated water, total mining and metals combined (copper and other metals) are about 2500 ML/d or about 7% of the global industrial desalinated water market.5\nSize, structure and installation examples from the copper mining desalination market\nCochilco monitors and regularly reports on water consumption in the Chilean copper mining industry. The table below is adapted from the organisation’s 2017 report6 with amendments for a number of recent projects announced in internet stories plus one desalination plant in southern Peru.\nTable 6: Selected copper mining desalination plants\n\n\n\nStart-up date\nStatus\nOwnership\nName\nDesal capacity [ML/d]\nList\n\n\n\nPlanning\nPlanning\nTrends Industrial\nENAPAC multi-user\n227\nOther\n\n\nOperating\nOperating\nBHP\nEscondida EWS\n216\nCochilco 2017\n\n\nPlanning\nPlanning\nCodelco\nChuquicamata\n169\nOther\n\n\n2021\nFeasibility\nTeck\nQuebrada Blanca\n112\nCochilco 2017\n\n\n\nPlanning\nGlencore / Anglo / JCR\nCollahuasi\n91\nOther\n\n\n2020\nFeasibility\nBHP\nSpence Growth\n86\nCochilco 2017\n\n\n2021\nw/o EIA\nGoldcorp Teck\nNuevaUnion\n64\nCochilco 2017\n\n\n2020\nFeasibility\nCodelco\nRT Sulphides\n54\nCochilco 2017\n\n\nPlanning\nPlanning\nBHP\nCerra Colorado\n49\nOther\n\n\nOperating\nOperating\nBHP\nEscondida - Coloso\n45\nCochilco 2017\n\n\n2025\nw/o EIA\nFreeport McMoran\nEl Abra\n43\nCochilco 2017\n\n\n2020\nFeasibility\nAMSA\nLos Pelambres\n35\nCochilco 2017\n\n\nOperating\nOperating\nLundin\nCandeleria\n26\nCochilco 2017\n\n\n2020\nFeasibility\nMantos Copper\nDesarrollo Mantoverde\n22\nCochilco 2017\n\n\n2018\nFeasibility\nLundin\nCandeleria 2030\n17\nCochilco 2017\n\n\nOperating\nOperating\nMantos Copper\nMantoverde\n10\nCochilco 2017\n\n\nOperating\nOperating\nAntofagasta\nEsperanza\n4\nOther\n\n\nOperating\nOperating\nBHP, Glencore, Teck, etc.\nAntamina / Talara, Peru\n2\nOther\n\n\nSeveral of the larger Chilean desalination plants are similarly sized to municipal desalination plants in the USA or Australia.\nSWRO and BWRO applications are standard technology at water stressed sites such as copper mine sites in northern Chile, southern Peru, and at non-copper mine sites such as the iron mining of CITIC Pacific Mining at Cape Preston, Karratha, Australia (140ML/d). RO is standard for effluent sites such as the Queensland coal seam gas wastewater treatment sites (&gt;100ML/d). \nHow large is “large”? Comparison of desalination plant scales\nComparing the scale of various global civil/municipal seawater desalination plants with the largest copper mining desalination plants demonstrates that the size of the largest civil/municipal plants are five times the size of the largest mining desalination sites. The total number of 16,000 installed desalination plants, and the total number of fewer than 50 copper mining desalination plants further indicates the market “drive” for innovation and cost reduction is mainly coming to the desalination industry from outside the mining sector.\nFigure 53 - Comparison of desalination plant scales\n\nTypical SWRO plant technology / flow diagram\nA typical SWRO process has high pressure feed pumps, pre-treatment filtration in progressively finer stages, a multitude of parallel and series RO cartridge units, an optional pressure energy recovery unit, and chemical dosing (depending on the use of the water, e.g., chlorination for drinking water). The energy intensity of the process unit is dominated by the pressure drop within the reverse osmosis cartridges which consume 71% of the energy at a SWRO desalination plant. Pretreatment is in the range of 11% of the energy, and the other energy users are mainly the various pumps (feed pumps, water delivery, brine concentrate outfall, etc.)7 Of course, thermal desalination has different energy requirements. Also, note that mining water is not purified to the same specification.\nThe basic reverse osmosis unit contains a number of spiral wound cartridges. The current industry standard is a large industrial 200mm diameter (8-inch) cartridge, possibly due to the maximum manual handling weight of a wet, fouled cartridge. There are unique designs including a large diameter “barrel” design.\nThe basic pretreatment process is a reversible flow backwash sand filter to remove gross particulates followed by traditional cartridge filters. Seawater can be treated with chemicals to precipitate some dissolved ions that are more effectively removed by traditional filtration, thus lowering load on subsequent filter units.\nPartial list of technology suppliers\nA number of engineering and process equipment companies specialise in the plant design services of seawater desalination plants or the supply of specialist components such as reverse osmosis membranes or pumps. A partial list of suppliers is provided below:\nACCIONA, https://www.acciona.com.au/projects/swro-adelaide/ \nBechtel, https://www.bechtel.com/projects/escondida-water-supply/ \nBlack &amp; Veatch,  https://www.bv.com/projects/black-veatch-clients-sustainability-project-will-increase-production-worlds-largest-copper \nCSM, http://www.csmfilter.com/csm/01com/company_csm.asp \nDoosan, http://www.doosanheavy.com/en/products/water/plant01/ \nDupont, https://www.dupont.com/water/industries/desalination-seawater-reverse-osmosis-membranes.html \nHydranautics Nitto, https://membranes.com/solutions/products/ro/swc/ \nIDE, https://www.ide-tech.com/en/solutions/desalination/?data=item_1\nIsle Utilities, https://www.isleutilities.com \nKoch, https://www.kochseparation.com/technologies/membrane-filtration/ \nLG Chem, https://www.lgwatersolutions.com/en/market/desalination \nLenntech / Trisep, https://www.lenntech.com/products/membrane/trisep-1.htm \nOsmoflo, https://www.osmoflo.com/en/markets-water-treatment/mining/\nSuez, https://www.suezwatertechnologies.com/applications/desalination \nToray, https://www.toray.com/products/membranes/mem_0040.html \nVeolia, https://www.veoliawatertechnologies.com/en/applications/seawater-desalination \nEnergy intensity of SWRO\nSeawater desalination requires considerable energy. The range of technologies in the broad category of desalination is described below in this section.  \nAmong the main technologies, the energy required for reverse osmosis is mainly electric power to the high-pressure pump system. The thermally driven technologies require process heating. Today several of the thermal units in the Middle East use fossil fuel heating or waste process heat, but concentrated solar thermal power may be an alternative in a carbon constrained future scenario.\nThe energy intensity of pumping systems can also be high, especially in mountainous regions such as the Atacama Desert, Chile where SWRO plants operate at sea level, and mining operations are at high elevations.\nSWRO energy and cost benchmark data\nAmple data exists in water engineering literature for the cost and energy intensity to supply drinking water for municipal water systems around the world. The table below shows a comparison of the energy demand for a range of different drinking water supply alternatives.8, 9 Thermal technologies are also added for comparison.\nTable 7: Energy intensity of desalination applications\n\n\n\nDrinking water supply alternative\nEnergy use [kWh/m3]\nReference\n\n\n\nConventional treatment of surface water\n0.2 to 0.4\nVoutchkov\n\n\nWater reclamation\n0.5–1.0\nVoutchkov\n\n\nIndirect potable reuse\n1.5–2.0\nVoutchkov\n\n\nBrackish water desalination\n1.0–1.5\nVoutchkov\n\n\nDesalination of Pacific Ocean water\n2.5–4.0\nVoutchkov\n\n\nSeawater Reverse Osmosis\n4–6\nOmar et al.\n\n\nMulti-Effect Distillation (thermal)\n14–21\nOmar et al.\n\n\nMulti-Stage Flash (thermal)\n20–27\nOmar et al.\n\n\nSeawater reverse osmosis desalination plants are somewhat a global commodity in terms of equipment supplied, but the large number of installations span a wide range of feed water qualities, installation labour costs and site-specific installation factors. The table below shows a range of water costs (inclusive of operation and capital costs) and energy use.10\nTable 8: Cost and energy requirements for seawater RO desalination\n\n\n\nClassification\nCost of water   [US$/m3]\nSWRO system energy use [kWh/m3]\n\n\n\nLow-end bracket\n0.5–0.9\n2.5–2.8\n\n\nMedium range\n0.9–1.5\n2.9–3.2\n\n\nHigh-end bracket\n1.6–3.0\n3.3–4.0\n\n\nAverage\n1.1\n3.1\n\n\nMining applications generally would not require the same level of purification, and desalination costs and energy are probably on the low end of the ranges above or even below these ranges depending on the unique site water specification.\nVoutchkov reviews a number of trends in technology development and alternatives in design. Generally, SWRO is eight to ten times more expensive than surface water. Energy costs for SWRO supplies are 25% to 40% of production costs of the water. There may be a theoretical minimum of 0.7 kWh/m3 water production at 100% recovery, but many plants operate at pragmatic actual recovery rates at only around 50%, so energy is typically 1.1 kWh/m3. A long-term US program called the Affordable Desalination Collaboration has yielded \n a number of improvements in technology. Further improvements are expected. Actual capital costs are project and site specific.\nKey design factors that affect SWRO energy intensity\nSWRO plants can be designed to take advantage of certain process flow diagram configurations, certain collocation or circular design features, and certain energy savings equipment features. These alternatives are summarised in the table below:11\nTable 9: Factors affecting RO energy demand\n\n\n\nFactor\nEnergy saving   technology trends\nPotential for energy savings (as % of   industry average)\n\n\n\nSource water temperature\nUse of warmer source water (collocation   with power generation plants)\n3 to 5%\n\n\nSource water salinity\nUse of lower-salinity source water or blend   of seawater and brackish water\nOver 50%\n\n\nMembrane element and   system energy and   productivity losses\nUse of higher productivity elements\n5 to 15%\n\n\nApplication of lower-energy &amp; cost RO   system configurations\n\n\n\n\nHigh pressure RO feed   pump efficiency\nMaximizing pump and motor efficiency by the use of large pumps serving multiple RO trains\n5 to 10%\n\n\nRecovery of energy from   RO concentrate\nUse of isobaric chamber type technologies\n10 to 15%\n\n\nTypes of water\nPrimary water feed for copper mining sites can come from nature as seawater, inland brackish water or freshwater from surface or underground sources. There is potential for innovation in the use of wastewater from manmade sources including secondary treated municipal wastewater, concentrate / reject wastewater from municipal RO plants as a feed to industrial processes such as mining, and industrial process water / wastewater that is recycled from a copper mine itself or from other industrial sources. The incoming water quality, dissolved ions, and unique chemistry must be known to specify desalination technology.\nList of emerging desalination technologies\nReverse osmosis is a robust and economical alternative for a wide range of seawater desalination applications. Thus, it can be generalised that SWRO is considered the state of the art for purifying seawater for coastal copper mining locations. However, it is not the only technology available, and there are many other new technologies in service and undergoing research and development. It is worthwhile looking forward to the Zero Emission Copper Mine of the Future to consider all the available technologies that currently hold notable market positions and consider how they may develop further in the coming years towards the realisation of the carbon neutral era.\nThe main technology categories are:\n\nPressure driven technologies\n\nElectrically driven technologies\n\nThermal evaporation technologies\n\nIon Exchange\n\nAdsorption Desalination\n\nZero Liquid Discharge, an adjunct technology set\n\n\nOverview of pressure-driven technologies\nThe main pressure driven technologies are Reverse Osmosis (RO) and Nano Filtration (NF). Some technology overviews merge the two technologies as they are physically similar, i.e., both are generally spiral wound cartridges contained within pressure vessels. The main difference is the size of the filter pore and thus the type of ion or molecule that will be blocked by the membrane filter media.  \nGenerally, a series of cheaper and progressively finer filtration steps precedes nanofiltration or the final RO membrane. Calcium, magnesium and larger divalent metal ions including copper are effectively separated by NF. RO effectively separates sodium and chloride.\nFigure 54 - Comparison of RO and filter technologies\n\nNF and RO media are usually contained in a spiral wound cartridge, and typically, multiple (especially seven) cartridges are held in series to purify the water. Some higher capacity systems use “barrel” flow distributions.\nRO is the main technology in use globally. RO is the “work horse” of modern desalination.\nFigure 55 - RO membrane cartridge flow. Source: Daniele Pugliesi, CC-BY3.0\n\nIntroduction of electrically-driven technologies\nElectrodialysis (ED) and Electrodialysis Reversal (EDR) are the main two commercial technologies today (low take-up, Horizon 2). Electrodeionization, Capacitative Deionization (CDI), and Electrodialysis Metathesis (EDM) are emerging technologies (Horizon 3). Metal ions at trace levels in water or dilute acid may be good targets for electrically-driven technologies. Electrochemical desalination is a further permutation involving ultrafiltration, electrodialysis, and continuous deionisation. Evoqua broke off from Siemens and developed technology from a Challenge Grant by the Singapore Government. This has potential for 5% to 15% reduction in costs. The broader question would be how might copper industry / mining industry evaluate electrochemical purification of their own intermediate process waters in a Horizon 3 test.\nThermal technologies\nThe main thermal technologies are Membrane Distillation (MD), Multi-Effect Distillation (MED), Vapour Compression Distillation (VCD), and Multistage Flash Distillation (MFD). Thermal desalination is especially practiced in civil/ municipal systems in the Middle East with fired heated pressure vessels or with waste heat. There is clearly potential to practice thermal desalination with concentrated solar power (CSP) in many global locations.12 As shown above in Table 7: Energy intensity of desalination applications, thermal desalination uses more energy, but it is heat energy, not electricity. CSP systems operate on molten salt solutions at a range of 800C to perhaps 1100C or in loops with molten sodium. These streams exchange heat with water to raise high pressure steam that drives a turbine. Molten salt systems can store heat for process heating or conversion to electricity after sundown.\nFor tailings liquors, a combination of RO and thermal technologies have been used in mining applications. Researchers at the University of Antofagasta report results from multi-stage direct contact Membrane Distillation to extract water from a hot stream (60C) of sulphuric acid and metal ions over a 0.2micron PVDF membrane into a cool water stream (20C).13\nKey ideas / opportunities for innovation are:\n\nMembrane Distillation (Horizon 2)\n\nMulti-Effect Distillation (Horizon 2)\n\nMultistage Flash Distillation (Horizon 2)\n\nConcentrated Solar Power thermal heat (Horizon 2/3)\n\nCSP sundown storage (Horizon 2/3)\n\n\nIon exchange\nIon exchange refers to a group of processes that pass saline water over a packed bed of resin beads, a resin membrane, or a liquid phase to exchange calcium and magnesium in the water for sodium to remove water hardness. The Ca2+ and Mg2+ can be converted to carbonates and removed by precipitation. The process is reversed by washing, electrolysis or electrophoresis. \nAdsorption Desalination\nLike Ion Exchange, Adsorption Desalination works by passing water through a silica gel packed bed, but this is an emerging hybrid physical-thermal process which first heats the saline water to create a vapour, then it captures the pure water vapour on the surface of the adsorbent. Additional heat is applied to drive the purified water off the surface of the silica.14 The temperatures are low enough that waste heat can be used. (emerging, Horizon 3).\nZero Liquid Discharge\nZero Liquid Discharge (ZLD) or near-ZLD is a bolt-on technology to desalination that crystallises salt from seawater brine concentrate and removes it as solid salt crystals. Applied to tailings, ZLD allows dry stacked solids to be created. Forward osmosis can use salt to concentrate reject brine and may possibly have integration with concentrated solar power that could yield 20 to 35% energy reduction for ZLD. Membrane distillation shows a high degree of academic research interest, and researchers cite 20 to 35% energy reduction for MD-ZLD. “Dewvaporation” is an emerging technology alternative to RO. It works when there is dry desert air, saline water, and free or low-cost waste heat. Dewvaporation may yield a 15% to 25% theoretical cost reduction, is perhaps 10 years away as a Horizon 3 opportunity. Adsorption desalination is another emerging technology alternative to RO. AD adsorbs water from saline feed onto silica gel and desorbs pure water with free or low-cost waste heat. NUS Singapore is working on demonstration in Saudi Arabia. Energy is only 1.4 kWh/m3 if there is free heat available for the desorption step. AD-ZLD is Horizon 2/3.\nBiomimetic processes\nBiomimicry is the industrial application of biochemical processes from nature. This includes a wide range of emerging technologies including biomimetic membranes and wet bioleaching. Biomimetic membranes and bioleaching are Horizon 3.\nEmerging innovation possibilities\nCollocation / Circular Economy integration:\nIt may be feasible to integrate copper desalination water feed with wastewater discharge, thermal power water discharge, or thermal power waste heat exchange. Voutchkov describes how integration of SWRO desalination plants with coastal thermal power plants (e.g., fossil fuel fired power with steam turbines) could yield efficiencies, but in a carbon constrained future, fired power plants may be converted to hydrogen/ammonia gas turbine or steam turbines linked to concentrated solar thermal power (CSP). Brief discussions with one Australia-based concentrated solar thermal power start-up company that uses indicated that coastal sites are not ideal for CSP due to the effect of saltwater surf spray interfering with Direct Normal Irradiance (DNI) of solar energy. Voutchkov further suggests that regional municipal drinking water brackish brine collection can be cleaner than seawater feed for reverse osmosis, and a sort of circular economy recycling of brackish brine at inland locations can be more energy efficient than seawater feed. He describes integration of secondary wastewater treatment discharge being tested in Japan and South Africa to feed reverse osmosis plants instead of seawater.\nThe Singapore Changi NEWater process uses secondary wastewater treatment discharge to feed reverse osmosis plants instead of seawater.  \n\nWarmer seawater feed (Horizon 2/3)\n\nPower plant collocation / waste heat - circular economy (Horizon 2)\n\nAlternate feed water source - circular economy (Horizon 1/2)\n\n\nFurther RO membrane evolution:\nTrends towards higher surface area, improved permeability, and denser leaf packing have been underway for some decades. Cartridge flow rates have increased from 18 m3/day in the 1990s, to 28 m3/day in 2003, 34 m3/day in 2004, and 55 m3/day in 2017.15 Emerging materials of construction improvements are underway. Nano membranes are now adding a nano zeolite top layer or carbon nanotube layer with holes perfectly sized to allow water molecules to enter and to reject larger ions. These may yield 10 to 20% higher water production and use 10 to 15% less energy.\n\nNew RO membrane materials (Horizon 1/2) \n\nNew RO configurations (Horizon 2)\n\n\nOptimised RO membrane and pump configurations:\nThere are a number of incremental improvements. Standard RO membrane vessels tend to be 200mm diameter / 8-inch with seven membrane cartridges (5-1-1). Efficiencies can be gained by using three different types of membranes to balance flux in the first cartridge and second cartridge. Engineers report 5 to 15% energy savings possible for a present pressure vessel to be reconfigured at the next plant shutdown, cartridge changeout. Low recovery plant design is also reported. Engineers drop the design recovery to 35% for SWRO or 65% for BWRO. This reduces energy, but there is a big water outflow of concentrated brine. Pump technologies improvements are reported. Larger, high efficiency multistage centrifugal pumps are reported. Typical pump efficiency is now 80%. A single larger pump instead of two half-duty pumps can open up a better efficiency of 85%. Ashekelon, Israel has an 88% efficiency large pump. The theoretical limit is approximately 90% efficiency. Alternatively, multiple smaller high efficiency positive displacement (PD) pumps can be applied. PD pumps can deliver 94-97% efficiency but may be less favoured for capital cost reasons.\n• RO configuration upgrade (Horizon 1/2).\n• Low recovery SWRO/BWRO plants (Horizon 2)\n• Incremental SWRO pump efficiencies (Horizon 1/2)\nEnergy recovery from brine concentrate:\nA “turbocharger” centrifugal technology is a standard feature in the latest desalination plants. Pressurised concentrated brine flows through a Pelton centrifugal turbine or a positive displacement piston pump that drives a seawater feed piston pump to convert and recover energy. SWRO fluid energy recovery is Horizon 1/2.\nEconomy of scale:\nShared infrastructure like the Chilean piping networks could be feasible in new locations. Shared infrastructure is Horizon 1/2.\nVarying seawater treatment:\nChilean mines have used or tested direct untreated seawater,16 partially treated seawater (TSW), desalinated seawater and discard brine concentrate17 for different copper ore treatments. SWRO discard brine with concentrated chloride did not aid dissolution of chalcopyrite, but also did not harm, and temperature of leaching was a more significant factor. Direct seawater is used at the Chilean sites of Centinela, Sierra Gorda, and Antucoya. Calcium and magnesium cause problems with flotation, especially if clay or kaolin are present in the ore. Alkaline treatment, CO2 and bioprecipitation with bacteria are used for precipitation removal of Ca2+ and Mg2+.18 The relative costs of treatment and pumping are shown below.\nCorrosion is an issue with raw seawater and TSW requiring some special coatings, water washing, additional maintenance, and rubber coatings on various elements of mills, screens, crushers, cyclones, flotation cells and thickeners.19\n\nTreated seawater is Horizon 1/2/3 depending on the previous experience at a mining site or in a mining region with saline flotation operation and equipment upgrades. Application to all ore bodies may not be equivalent.\n\nTable 10: Cost of direct seawater and treated seawater in Chile\n\n\n\n\nCost by water quality type [USD$/m3]\n\n\n\n\n\nDelivery point\nSWRO\nTSW\nSW\n\n\nSea level\n$1.42\n$0.47\n$0.30\n\n\nFlotation plant (160km, 3500 m.a.s.l.)\n$5.58\n$4.70\n$4.53\n\n\n\n\nTechnology development programs and technology forecasts\nUnlike a number of the strictly mining or copper mining technologies in the rest of this report, there is a large global scale, large count of installations, and a wide range of water desalination technologies (water purification and wastewater treatment) in development. The Phase 1 Zero Emission Copper Mine of the Future report offers Enabling Levers for strategic coordination and success. Public policy, collaborative industry frameworks, and an open innovation mindset have been applied in the civil engineering, chemical engineering and water engineering technologies presented in this section. Desalination does not lack technology forecasting, global alignment and open innovation for international alignment to the UN SDGs. This section and its explicit (non-secretive) data are examples of what can be achieved with international publicly funded research programs aligned to real-world industry connections. Plant economics data and techno-economics forecasting data is available for long-term industry-wide research planning.\nVoutchkov forecasts overall SWRO and other alternative desalination improvements on a two-decade time horizon as described below.20\nTable 11: Nikolay Voutchkov Desalination Technology Forecast (2017)\n\n\n\nEngineering parameters and performance for best-in class desalination plants\n\n\n\n\n\n\n\nInnovation Timeframe\n\n\n\n\nParameter\nYear   2017\nWithin 5 years [to 2022]\nWithin 20 years [to 2037]\n\n\nTotal electrical energy use [kWh/ m3]\n3.5–4.0\n2.8–3.2\n2.1–2.4\n\n\nCost of water [USD$/m3]\n0.8–1.2\n0.6–1.0\n0.3–0.5\n\n\nConstruction cost [USD$/MLD]\n$1.2–$2.2\n$1.0–$1.8\n$0.5–$0.9\n\n\nMembrane productivity [m3/ membrane]\n28-47\n35-55\n95-120\n\n\n\n\nCaldera and Breyer provide detailed learning curve analysis of desalination capital costs.21\nThe figure below is one example of retrospective cost analysis of small and medium-sized desalination plants with low capex numbers (small &lt;1,500 and medium &lt;$USD1,000/m3/d) are removed. Their analysis estimates a learning rate from 1977 to 2015 of 14.62%.\nFigure 56 - Retrospective desalination learning curve analysis. Source: Caldera and Breyer\n\nMayor offers learning curve analysis and prospective capital cost predictions to 2050.22\nMayor estimates cost reduction prospects for thermal technologies of 6-8% by 2030, 8-10% by 2050. She estimates RO cost reductions of 12-33% by 2030 and 18-66% by 2050. These efficiencies are estimated based on technology learning curve effects and economies of scale effects. Mayor describes desalination technology as the nexus of water, energy and land challenges.\nFigure 57 - Prospective desalination learning curve analysis. Source: Mayor\n\n","text":"## Size and structure of the global desalination technology market\n\nToday there is approximately 100 million m3/d water desalinated globally in all sectors including municipal drinking water and all industrial uses. Estimates vary among sources, and there are constantly new plants coming online, but this rough figure is verified by several sources.[1](/citation/WR-208-221), [2](/citation/WR-118-119-120-121), [3](/citation/WR-210) Large single city municipal desalination plants are in the general range of hundreds of megalitres per day, and the unit of megalitres per day (ML/d) will be used in the rest of this section to provide a consistent comparison of the size and scale of several global municipal desalination plants alongside industrial and copper mining desalination plants. Municipal drinking water represents 59% of the worldwide installed desalination capacity, and total industrial desalination is 36%.[4](/citation/WR-210)\n\n**Figure 52 - Global desalination applications**\n<ImageAsset nomargin slug=\"wr-81-17-2-fig-52\" />\n\nExamples of some of the largest municipal and mixed municipal/industrial desalination plants in the world are shown in the table below.\n\n**Table 5: Scale of a few municipal desalination plants**\n\n| **Site**                   | **Capacity   [ML/d]** |\n| -------------------------- | --------------------- |\n| Shoaiba, Saudi Arabia      | 1,282                 |\n| Sorek, Israel              | 1,172                 |\n| Ras Al Khair, Saudi Arabia | 1,036                 |\n| Taweelah, UAE              | 909                   |\n| Rabigh, Saudi Arabia       | 600                   |\n| Fujairah, UAE              | 587                   |\n| Melbourne, Australia       | 400                   |\n| Sydney, Australia          | 250                   |\n| Tianjin, China             | 200                   |\n| Carlsbad, USA              | 189                   |\n| El Paso, USA               | 104                   |\n| Tampa Bay, USA             | 95                    |\n\nWithin industrial desalinated water, total mining and metals combined (copper and other metals) are about 2500 ML/d or about 7% of the global *industrial* desalinated water market.[5](/citation/WR-210)\n\n## Size, structure and installation examples from the copper mining desalination market\n\nCochilco monitors and regularly reports on water consumption in the Chilean copper mining industry. The table below is adapted from the organisation’s 2017 report[6](/citation/WR-213) with amendments for a number of recent projects announced in internet stories plus one desalination plant in southern Peru.\n\n**Table 6: Selected copper mining desalination plants**\n\n| **Start-up date** | **Status**  | **Ownership**             | **Name**                | **Desal capacity [ML/d]** | **List**      |\n| ----------------- | ----------- | ------------------------- | ----------------------- | ------------------------- | ------------- |\n| Planning          | Planning    | Trends Industrial         | ENAPAC multi-user       | 227                       | Other         |\n| Operating         | Operating   | BHP                       | Escondida EWS           | 216                       | Cochilco 2017 |\n| Planning          | Planning    | Codelco                   | Chuquicamata            | 169                       | Other         |\n| 2021              | Feasibility | Teck                      | Quebrada Blanca         | 112                       | Cochilco 2017 |\n|                   | Planning    | Glencore / Anglo / JCR    | Collahuasi              | 91                        | Other         |\n| 2020              | Feasibility | BHP                       | Spence Growth           | 86                        | Cochilco 2017 |\n| 2021              | w/o EIA     | Goldcorp Teck             | NuevaUnion              | 64                        | Cochilco 2017 |\n| 2020              | Feasibility | Codelco                   | RT Sulphides            | 54                        | Cochilco 2017 |\n| Planning          | Planning    | BHP                       | Cerra Colorado          | 49                        | Other         |\n| Operating         | Operating   | BHP                       | Escondida - Coloso      | 45                        | Cochilco 2017 |\n| 2025              | w/o EIA     | Freeport McMoran          | El Abra                 | 43                        | Cochilco 2017 |\n| 2020              | Feasibility | AMSA                      | Los Pelambres           | 35                        | Cochilco 2017 |\n| Operating         | Operating   | Lundin                    | Candeleria              | 26                        | Cochilco 2017 |\n| 2020              | Feasibility | Mantos Copper             | Desarrollo Mantoverde   | 22                        | Cochilco 2017 |\n| 2018              | Feasibility | Lundin                    | Candeleria 2030         | 17                        | Cochilco 2017 |\n| Operating         | Operating   | Mantos Copper             | Mantoverde              | 10                        | Cochilco 2017 |\n| Operating         | Operating   | Antofagasta               | Esperanza               | 4                         | Other         |\n| Operating         | Operating   | BHP, Glencore, Teck, etc. | Antamina / Talara, Peru | 2                         | Other         |\n\n\n\nSeveral of the larger Chilean desalination plants are similarly sized to municipal desalination plants in the USA or Australia.\n\nSWRO and BWRO applications are standard technology at water stressed sites such as copper mine sites in northern Chile, southern Peru, and at non-copper mine sites such as the iron mining of CITIC Pacific Mining at Cape Preston, Karratha, Australia (140ML/d). RO is standard for effluent sites such as the Queensland coal seam gas wastewater treatment sites (>100ML/d). \n\n## How large is “large”? Comparison of desalination plant scales\n\nComparing the scale of various global civil/municipal seawater desalination plants with the largest copper mining desalination plants demonstrates that the size of the largest civil/municipal plants are five times the size of the largest mining desalination sites. The total number of 16,000 installed desalination plants, and the total number of fewer than 50 copper mining desalination plants further indicates the market “drive” for innovation and cost reduction is mainly coming to the desalination industry from outside the mining sector.\n\n**Figure 53 - Comparison of desalination plant scales**\n<ImageAsset nomargin slug=\"WR-82-17.4-fig-53\" />\n\n## Typical SWRO plant technology / flow diagram\n\nA typical SWRO process has high pressure feed pumps, pre-treatment filtration in progressively finer stages, a multitude of parallel and series RO cartridge units, an optional pressure energy recovery unit, and chemical dosing (depending on the use of the water, e.g., chlorination for drinking water). The energy intensity of the process unit is dominated by the pressure drop within the reverse osmosis cartridges which consume 71% of the energy at a SWRO desalination plant. Pretreatment is in the range of 11% of the energy, and the other energy users are mainly the various pumps (feed pumps, water delivery, brine concentrate outfall, etc.)[7](/citation/WR-118-119-120-121) Of course, thermal desalination has different energy requirements. Also, note that mining water is not purified to the same specification.\n\nThe basic reverse osmosis unit contains a number of spiral wound cartridges. The current industry standard is a large industrial 200mm diameter (8-inch) cartridge, possibly due to the maximum manual handling weight of a wet, fouled cartridge. There are unique designs including a large diameter “barrel” design.\n\nThe basic pretreatment process is a reversible flow backwash sand filter to remove gross particulates followed by traditional cartridge filters. Seawater can be treated with chemicals to precipitate some dissolved ions that are more effectively removed by traditional filtration, thus lowering load on subsequent filter units.\n\n\n## Partial list of technology suppliers\n\nA number of engineering and process equipment companies specialise in the plant design services of seawater desalination plants or the supply of specialist components such as reverse osmosis membranes or pumps. A partial list of suppliers is provided below:\n\nACCIONA, https://www.acciona.com.au/projects/swro-adelaide/ \n\nBechtel, https://www.bechtel.com/projects/escondida-water-supply/ \n\nBlack & Veatch,  https://www.bv.com/projects/black-veatch-clients-sustainability-project-will-increase-production-worlds-largest-copper \n\nCSM, http://www.csmfilter.com/csm/01com/company_csm.asp \n\nDoosan, http://www.doosanheavy.com/en/products/water/plant01/ \n\nDupont, https://www.dupont.com/water/industries/desalination-seawater-reverse-osmosis-membranes.html \n\nHydranautics Nitto, https://membranes.com/solutions/products/ro/swc/ \n\nIDE, https://www.ide-tech.com/en/solutions/desalination/?data=item_1\n\nIsle Utilities, https://www.isleutilities.com \n\nKoch, https://www.kochseparation.com/technologies/membrane-filtration/ \n\nLG Chem, https://www.lgwatersolutions.com/en/market/desalination \n\nLenntech / Trisep, https://www.lenntech.com/products/membrane/trisep-1.htm \n\nOsmoflo, https://www.osmoflo.com/en/markets-water-treatment/mining/\n\nSuez, https://www.suezwatertechnologies.com/applications/desalination \n\nToray, https://www.toray.com/products/membranes/mem_0040.html \n\nVeolia, https://www.veoliawatertechnologies.com/en/applications/seawater-desalination \n\n## Energy intensity of SWRO\n\nSeawater desalination requires considerable energy. The range of technologies in the broad category of desalination is described below in this section.  \n\nAmong the main technologies, the energy required for reverse osmosis is mainly electric power to the high-pressure pump system. The thermally driven technologies require process heating. Today several of the thermal units in the Middle East use fossil fuel heating or waste process heat, but concentrated solar thermal power may be an alternative in a carbon constrained future scenario.\n\nThe energy intensity of pumping systems can also be high, especially in mountainous regions such as the Atacama Desert, Chile where SWRO plants operate at sea level, and mining operations are at high elevations.\n\n## SWRO energy and cost benchmark data\n\nAmple data exists in water engineering literature for the cost and energy intensity to supply drinking water for municipal water systems around the world. The table below shows a comparison of the energy demand for a range of different drinking water supply alternatives.[8](/citation/WR-118-119-120-121), [9](/citation/WR-216-219) Thermal technologies are also added for comparison.\n\n**Table 7: Energy intensity of desalination applications**\n\n| **Drinking water supply alternative**   | **Energy use [kWh/m3]** | **Reference** |\n| --------------------------------------- | ----------------------- | ------------- |\n| Conventional treatment of surface water | 0.2 to 0.4              | Voutchkov     |\n| Water reclamation                       | 0.5–1.0                 | Voutchkov     |\n| Indirect potable reuse                  | 1.5–2.0                 | Voutchkov     |\n| Brackish water desalination             | 1.0–1.5                 | Voutchkov     |\n| Desalination of Pacific Ocean water     | 2.5–4.0                 | Voutchkov     |\n| Seawater Reverse Osmosis                | 4–6                     | Omar et al.   |\n| Multi-Effect Distillation (thermal)     | 14–21                   | Omar et al.   |\n| Multi-Stage Flash (thermal)             | 20–27                   | Omar et al.   |\n\n\n\nSeawater reverse osmosis desalination plants are somewhat a global commodity in terms of equipment supplied, but the large number of installations span a wide range of feed water qualities, installation labour costs and site-specific installation factors. The table below shows a range of water costs (inclusive of operation and capital costs) and energy use.[10](/citation/WR-118-119-120-121)\n\n**Table 8: Cost and energy requirements for seawater RO desalination**\n\n| **Classification** | **Cost of water   [US$/m3]** | **SWRO system energy use [kWh/m3]** |\n| ------------------ | ---------------------------- | ----------------------------------- |\n| Low-end bracket    | 0.5–0.9                      | 2.5–2.8                             |\n| Medium range       | 0.9–1.5                      | 2.9–3.2                             |\n| High-end bracket   | 1.6–3.0                      | 3.3–4.0                             |\n| Average            | 1.1                          | 3.1                                 |\n\n\nMining applications generally would not require the same level of purification, and desalination costs and energy are probably on the low end of the ranges above or even below these ranges depending on the unique site water specification.\n\nVoutchkov reviews a number of trends in technology development and alternatives in design. Generally, SWRO is eight to ten times more expensive than surface water. Energy costs for SWRO supplies are 25% to 40% of production costs of the water. There may be a theoretical minimum of 0.7 kWh/m3 water production at 100% recovery, but many plants operate at pragmatic actual recovery rates at only around 50%, so energy is typically 1.1 kWh/m3. A long-term US program called the Affordable Desalination Collaboration has yielded \n a number of improvements in technology. Further improvements are expected. Actual capital costs are project and site specific.\n\n## Key design factors that affect SWRO energy intensity\n\nSWRO plants can be designed to take advantage of certain process flow diagram configurations, certain collocation or circular design features, and certain energy savings equipment features. These alternatives are summarised in the table below:[11](/citation/WR-118-119-120-121)\n\n**Table 9: Factors affecting RO energy demand**\n\n| **Factor**                                                   | **Energy saving   technology trends**                        | **Potential for energy savings (as % of   industry average)** |\n| ------------------------------------------------------------ | ------------------------------------------------------------ | ------------------------------------------------------------ |\n| Source water temperature                                     | Use of warmer source water (collocation   with power generation plants) | 3 to 5%                                                      |\n| Source water salinity                                        | Use of lower-salinity source water or blend   of seawater and brackish water | Over 50%                                                     |\n| Membrane element and   system energy and   productivity losses | Use of higher productivity elements                          | 5 to 15%                                                     |\n| Application of lower-energy & cost RO   system configurations |                                                              |                                                              |\n| High pressure RO feed   pump efficiency                      | Maximizing pump and motor efficiency by the use of large pumps serving multiple RO trains | 5 to 10%                                                     |\n| Recovery of energy from   RO concentrate                     | Use of isobaric chamber type technologies                    | 10 to 15%                                                    |\n\n## Types of water\n\nPrimary water feed for copper mining sites can come from nature as seawater, inland brackish water or freshwater from surface or underground sources. There is potential for innovation in the use of wastewater from manmade sources including secondary treated municipal wastewater, concentrate / reject wastewater from municipal RO plants as a feed to industrial processes such as mining, and industrial process water / wastewater that is recycled from a copper mine itself or from other industrial sources. The incoming water quality, dissolved ions, and unique chemistry must be known to specify desalination technology.\n\n\n## List of emerging desalination technologies\n\nReverse osmosis is a robust and economical alternative for a wide range of seawater desalination applications. Thus, it can be generalised that SWRO is considered the state of the art for purifying seawater for coastal copper mining locations. However, it is not the only technology available, and there are many other new technologies in service and undergoing research and development. It is worthwhile looking forward to the Zero Emission Copper Mine of the Future to consider all the available technologies that currently hold notable market positions and consider how they may develop further in the coming years towards the realisation of the carbon neutral era.\n\nThe main technology categories are:\n\n* Pressure driven technologies\n\n* Electrically driven technologies\n\n* Thermal evaporation technologies\n\n* Ion Exchange\n\n* Adsorption Desalination\n\n* Zero Liquid Discharge, an adjunct technology set\n\n## Overview of pressure-driven technologies\n\nThe main pressure driven technologies are Reverse Osmosis (RO) and Nano Filtration (NF). Some technology overviews merge the two technologies as they are physically similar, i.e., both are generally spiral wound cartridges contained within pressure vessels. The main difference is the size of the filter pore and thus the type of ion or molecule that will be blocked by the membrane filter media.  \n\nGenerally, a series of cheaper and progressively finer filtration steps precedes nanofiltration or the final RO membrane. Calcium, magnesium and larger divalent metal ions including copper are effectively separated by NF. RO effectively separates sodium and chloride.\n\n**Figure 54 - Comparison of RO and filter technologies**\n<ImageAsset nomargin slug=\"WR-83-17.12-fig-54\" />\n\nNF and RO media are usually contained in a spiral wound cartridge, and typically, multiple (especially seven) cartridges are held in series to purify the water. Some higher capacity systems use “barrel” flow distributions.\n\nRO is the main technology in use globally. RO is the “work horse” of modern desalination.\n\n**Figure 55 - RO membrane cartridge flow. Source: Daniele Pugliesi, CC-BY3.0**\n<ImageAsset nomargin slug=\"WR-84-17.12-fig-55\" />\n\n## Introduction of electrically-driven technologies\n\nElectrodialysis (ED) and Electrodialysis Reversal (EDR) are the main two commercial technologies today (low take-up, Horizon 2). Electrodeionization, Capacitative Deionization (CDI), and Electrodialysis Metathesis (EDM) are emerging technologies (Horizon 3). Metal ions at trace levels in water or dilute acid may be good targets for electrically-driven technologies. Electrochemical desalination is a further permutation involving ultrafiltration, electrodialysis, and continuous deionisation. Evoqua broke off from Siemens and developed technology from a Challenge Grant by the Singapore Government. This has potential for 5% to 15% reduction in costs. The broader question would be how might copper industry / mining industry evaluate electrochemical purification of their own intermediate process waters in a Horizon 3 test.\n\n## Thermal technologies\n\nThe main thermal technologies are Membrane Distillation (MD), Multi-Effect Distillation (MED), Vapour Compression Distillation (VCD), and Multistage Flash Distillation (MFD). Thermal desalination is especially practiced in civil/ municipal systems in the Middle East with fired heated pressure vessels or with waste heat. There is clearly potential to practice thermal desalination with concentrated solar power (CSP) in many global locations.[12](/citation/WR-216-219) As shown above in Table 7: Energy intensity of desalination applications, thermal desalination uses more energy, but it is heat energy, not electricity. CSP systems operate on molten salt solutions at a range of 800C to perhaps 1100C or in loops with molten sodium. These streams exchange heat with water to raise high pressure steam that drives a turbine. Molten salt systems can store heat for process heating or conversion to electricity after sundown.\n\nFor tailings liquors, a combination of RO and thermal technologies have been used in mining applications. Researchers at the University of Antofagasta report results from multi-stage direct contact Membrane Distillation to extract water from a hot stream (60C) of sulphuric acid and metal ions over a 0.2micron PVDF membrane into a cool water stream (20C).[13](/citation/WR-220)\n\nKey ideas / opportunities for innovation are:\n\n* Membrane Distillation (Horizon 2)\n\n* Multi-Effect Distillation (Horizon 2)\n\n* Multistage Flash Distillation (Horizon 2)\n\n* Concentrated Solar Power thermal heat (Horizon 2/3)\n\n* CSP sundown storage (Horizon 2/3)\n\n## Ion exchange\n\nIon exchange refers to a group of processes that pass saline water over a packed bed of resin beads, a resin membrane, or a liquid phase to exchange calcium and magnesium in the water for sodium to remove water hardness. The Ca2+ and Mg2+ can be converted to carbonates and removed by precipitation. The process is reversed by washing, electrolysis or electrophoresis. \n\n## Adsorption Desalination\n\nLike Ion Exchange, Adsorption Desalination works by passing water through a silica gel packed bed, but this is an emerging hybrid physical-thermal process which first heats the saline water to create a vapour, then it captures the pure water vapour on the surface of the adsorbent. Additional heat is applied to drive the purified water off the surface of the silica.[14](/citation/WR-208-221) The temperatures are low enough that waste heat can be used. (emerging, Horizon 3).\n\n## Zero Liquid Discharge\n\nZero Liquid Discharge (ZLD) or near-ZLD is a bolt-on technology to desalination that crystallises salt from seawater brine concentrate and removes it as solid salt crystals. Applied to tailings, ZLD allows dry stacked solids to be created. Forward osmosis can use salt to concentrate reject brine and may possibly have integration with concentrated solar power that could yield 20 to 35% energy reduction for ZLD. Membrane distillation shows a high degree of academic research interest, and researchers cite 20 to 35% energy reduction for MD-ZLD. “Dewvaporation” is an emerging technology alternative to RO. It works when there is dry desert air, saline water, and free or low-cost waste heat. Dewvaporation may yield a 15% to 25% theoretical cost reduction, is perhaps 10 years away as a Horizon 3 opportunity. Adsorption desalination is another emerging technology alternative to RO. AD adsorbs water from saline feed onto silica gel and desorbs pure water with free or low-cost waste heat. NUS Singapore is working on demonstration in Saudi Arabia. Energy is only 1.4 kWh/m3 if there is free heat available for the desorption step. AD-ZLD is Horizon 2/3.\n\n## Biomimetic processes\n\nBiomimicry is the industrial application of biochemical processes from nature. This includes a wide range of emerging technologies including biomimetic membranes and wet bioleaching. Biomimetic membranes and bioleaching are Horizon 3.\n\n## Emerging innovation possibilities\n\n### Collocation / Circular Economy integration: \n\nIt may be feasible to integrate copper desalination water feed with wastewater discharge, thermal power water discharge, or thermal power waste heat exchange. Voutchkov describes how integration of SWRO desalination plants with coastal thermal power plants (e.g., fossil fuel fired power with steam turbines) could yield efficiencies, but in a carbon constrained future, fired power plants may be converted to hydrogen/ammonia gas turbine or steam turbines linked to concentrated solar thermal power (CSP). Brief discussions with one Australia-based concentrated solar thermal power start-up company that uses indicated that coastal sites are not ideal for CSP due to the effect of saltwater surf spray interfering with Direct Normal Irradiance (DNI) of solar energy. Voutchkov further suggests that regional municipal drinking water brackish brine collection can be cleaner than seawater feed for reverse osmosis, and a sort of circular economy recycling of brackish brine at inland locations can be more energy efficient than seawater feed. He describes integration of secondary wastewater treatment discharge being tested in Japan and South Africa to feed reverse osmosis plants instead of seawater.\n\nThe Singapore Changi NEWater process uses secondary wastewater treatment discharge to feed reverse osmosis plants instead of seawater.  \n\n* Warmer seawater feed (Horizon 2/3)\n\n* Power plant collocation / waste heat - circular economy (Horizon 2)\n\n* Alternate feed water source - circular economy (Horizon 1/2)\n\n### Further RO membrane evolution:\n\nTrends towards higher surface area, improved permeability, and denser leaf packing have been underway for some decades. Cartridge flow rates have increased from 18 m3/day in the 1990s, to 28 m3/day in 2003, 34 m3/day in 2004, and 55 m3/day in 2017.[15](/citation/WR-118-119-120-121) Emerging materials of construction improvements are underway. Nano membranes are now adding a nano zeolite top layer or carbon nanotube layer with holes perfectly sized to allow water molecules to enter and to reject larger ions. These may yield 10 to 20% higher water production and use 10 to 15% less energy.\n\n* New RO membrane materials (Horizon 1/2) \n\n* New RO configurations (Horizon 2)\n\n### Optimised RO membrane and pump configurations:\n\nThere are a number of incremental improvements. Standard RO membrane vessels tend to be 200mm diameter / 8-inch with seven membrane cartridges (5-1-1). Efficiencies can be gained by using three different types of membranes to balance flux in the first cartridge and second cartridge. Engineers report 5 to 15% energy savings possible for a present pressure vessel to be reconfigured at the next plant shutdown, cartridge changeout. Low recovery plant design is also reported. Engineers drop the design recovery to 35% for SWRO or 65% for BWRO. This reduces energy, but there is a big water outflow of concentrated brine. Pump technologies improvements are reported. Larger, high efficiency multistage centrifugal pumps are reported. Typical pump efficiency is now 80%. A single larger pump instead of two half-duty pumps can open up a better efficiency of 85%. Ashekelon, Israel has an 88% efficiency large pump. The theoretical limit is approximately 90% efficiency. Alternatively, multiple smaller high efficiency positive displacement (PD) pumps can be applied. PD pumps can deliver 94-97% efficiency but may be less favoured for capital cost reasons.\n\n• RO configuration upgrade (Horizon 1/2).\n\n• Low recovery SWRO/BWRO plants (Horizon 2)\n\n• Incremental SWRO pump efficiencies (Horizon 1/2)\n\n### Energy recovery from brine concentrate:\n\nA “turbocharger” centrifugal technology is a standard feature in the latest desalination plants. Pressurised concentrated brine flows through a Pelton centrifugal turbine or a positive displacement piston pump that drives a seawater feed piston pump to convert and recover energy. SWRO fluid energy recovery is Horizon 1/2.\n\n### Economy of scale:\n\nShared infrastructure like the Chilean piping networks could be feasible in new locations. Shared infrastructure is Horizon 1/2.\n\n### Varying seawater treatment:\n\nChilean mines have used or tested direct untreated seawater,[16](/citation/WR-123-223-226-227) partially treated seawater (TSW), desalinated seawater and discard brine concentrate[17](/citation/WR-224) for different copper ore treatments. SWRO discard brine with concentrated chloride did not aid dissolution of chalcopyrite, but also did not harm, and temperature of leaching was a more significant factor. Direct seawater is used at the Chilean sites of Centinela, Sierra Gorda, and Antucoya. Calcium and magnesium cause problems with flotation, especially if clay or kaolin are present in the ore. Alkaline treatment, CO2 and bioprecipitation with bacteria are used for precipitation removal of Ca2+ and Mg2+.[18](/citation/WR-123-223-226-227) The relative costs of treatment and pumping are shown below.\n\nCorrosion is an issue with raw seawater and TSW requiring some special coatings, water washing, additional maintenance, and rubber coatings on various elements of mills, screens, crushers, cyclones, flotation cells and thickeners.[19](/citation/WR-123-223-226-227)\n\n* Treated seawater is Horizon 1/2/3 depending on the previous experience at a mining site or in a mining region with saline flotation operation and equipment upgrades. Application to all ore bodies may not be equivalent.\n\n**Table 10: Cost of direct seawater and treated seawater in Chile**\n\n|                                        | **Cost by water quality type [USD$/m3]** |         |        |\n| -------------------------------------- | ---------------------------------------- | ------- | ------ |\n| Delivery point                         | **SWRO**                                 | **TSW** | **SW** |\n| Sea level                              | $1.42                                    | $0.47   | $0.30  |\n| Flotation plant (160km, 3500 m.a.s.l.) | $5.58                                    | $4.70   | $4.53  |\n\n<ImageAsset nomargin slug=\"WR-85-17.19.6-Page143\" />\n\n## Technology development programs and technology forecasts\n\nUnlike a number of the strictly mining or copper mining technologies in the rest of this report, there is a large global scale, large count of installations, and a wide range of water desalination technologies (water purification and wastewater treatment) in development. The Phase 1 Zero Emission Copper Mine of the Future report offers Enabling Levers for strategic coordination and success. Public policy, collaborative industry frameworks, and an open innovation mindset have been applied in the civil engineering, chemical engineering and water engineering technologies presented in this section. Desalination does not lack technology forecasting, global alignment and open innovation for international alignment to the UN SDGs. This section and its explicit (non-secretive) data are examples of what can be achieved with international publicly funded research programs aligned to real-world industry connections. Plant economics data and techno-economics forecasting data is available for long-term industry-wide research planning.\n\nVoutchkov forecasts overall SWRO and other alternative desalination improvements on a two-decade time horizon as described below.[20](/citation/WR-118-119-120-121)\n\n**Table 11: Nikolay Voutchkov Desalination Technology Forecast (2017)**\n\n| **Engineering parameters and performance for best-in class desalination plants** |                          |                              |                               |\n| ------------------------------------------------------------ | ------------------------ | ---------------------------- | ----------------------------- |\n|                                                              | **Innovation Timeframe** |                              |                               |\n| **Parameter**                                                | **Year   2017**          | **Within 5 years [to 2022]** | **Within 20 years [to 2037]** |\n| Total electrical energy use [kWh/ m3]                        | 3.5–4.0                  | 2.8–3.2                      | 2.1–2.4                       |\n| Cost of water [USD$/m3]                                      | 0.8–1.2                  | 0.6–1.0                      | 0.3–0.5                       |\n| Construction cost [USD$/MLD]                                 | $1.2–$2.2                | $1.0–$1.8                    | $0.5–$0.9                     |\n| Membrane productivity [m3/ membrane]                         | 28-47                    | 35-55                        | 95-120                        |\n\n<ImageAsset nomargin slug=\"WR-86-17.20-Page144\" />\n\nCaldera and Breyer provide detailed learning curve analysis of desalination capital costs.[21](/citation/WR-229)\n\nThe figure below is one example of retrospective cost analysis of small and medium-sized desalination plants with low capex numbers (small <1,500 and medium <$USD1,000/m3/d) are removed. Their analysis estimates a learning rate from 1977 to 2015 of 14.62%.\n\n**Figure 56 - Retrospective desalination learning curve analysis.** Source: Caldera and Breyer\n<ImageAsset nomargin slug=\"WR-87-17.20-fig-56\" />\n\nMayor offers learning curve analysis and prospective capital cost predictions to 2050.[22](/citation/WR-203-230)\n\nMayor estimates cost reduction prospects for thermal technologies of 6-8% by 2030, 8-10% by 2050. She estimates RO cost reductions of 12-33% by 2030 and 18-66% by 2050. These efficiencies are estimated based on technology learning curve effects and economies of scale effects. Mayor describes desalination technology as the nexus of water, energy and land challenges.\n\n**Figure 57 - Prospective desalination learning curve analysis.** Source: Mayor\n<ImageAsset nomargin slug=\"WR-88-17.20-fig-57\" />"},"openGraph":{"title":null,"description":{"plain":"Changes in climate, urbanisation, and general economic growth are driving increased demand for water, and RO installations are expanding in global count and in the scale of the plant sizes deployed for civil engineering / municipal water systems. Demand in the Middle East is especially strong, and some companies in the region such as IDE Israel are leading technology suppliers exporting services globally. The broader use of desalination for municipal drinking water drives the desalination industry and the development of new technologies. Mining is a relatively small sector, and copper mining is a subset of that sector.\n"},"image":{"thumbnails":{"full":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp"}}}},"intro":{"plain":"Changes in climate, urbanisation, and general economic growth are driving increased demand for water, and RO installations are expanding in global count and in the scale of the plant sizes deployed for civil engineering / municipal water systems. Demand in the Middle East is especially strong, and some companies in the region such as IDE Israel are leading technology suppliers exporting services globally. The broader use of desalination for municipal drinking water drives the desalination industry and the development of new technologies. Mining is a relatively small sector, and copper mining is a subset of that sector.\n","text":"Changes in climate, urbanisation, and general economic growth are driving increased demand for water, and RO installations are expanding in global count and in the scale of the plant sizes deployed for civil engineering / municipal water systems. Demand in the Middle East is especially strong, and some companies in the region such as IDE Israel are leading technology suppliers exporting services globally. The broader use of desalination for municipal drinking water drives the desalination industry and the development of new technologies. Mining is a relatively small sector, and copper mining is a subset of that sector."},"outro":{"id":"65d2edbfebf7bb9388ffb09b_outro","text":""},"videos":[],"imageAssets":[{"id":"65d2ed9eebf7bb9388ffaec1","name":"WR-85-17.19.6-Page143","image":{"id":"image_copper-alliance/image-asset/wr-85-17-19-6-page-143_image__WR-85-17.19.6-Page143_q6vxbc.webp","url":"https://res.cloudinary.com/shapeable/image/upload/v1682075781/copper-alliance/image-asset/wr-85-17-19-6-page-143_image__WR-85-17.19.6-Page143_q6vxbc.webp.webp","url2x":null,"type":"image/webp"}},{"id":"65d2ed9eebf7bb9388ffaec0","name":"WR-84-17.12-fig-55","image":{"id":"image_copper-alliance/image-asset/wr-84-17-12-fig-55_image__WR-84-17.12-fig-55_vmbn9n.webp","url":"https://res.cloudinary.com/shapeable/image/upload/v1682075763/copper-alliance/image-asset/wr-84-17-12-fig-55_image__WR-84-17.12-fig-55_vmbn9n.webp.webp","url2x":null,"type":"image/webp"}},{"id":"65d2ed9eebf7bb9388ffaebf","name":"WR-83-17.12-fig-54","image":{"id":"image_copper-alliance/image-asset/wr-83-17-12-fig-54_image__WR-83-17.12-fig-54_y7zbqz.webp","url":"https://res.cloudinary.com/shapeable/image/upload/v1682075739/copper-alliance/image-asset/wr-83-17-12-fig-54_image__WR-83-17.12-fig-54_y7zbqz.webp.webp","url2x":null,"type":"image/webp"}}],"organisations":[],"people":[],"embeds":{"citations":[{"slug":"WR-208-221","url":"https://www.awwa.org/Portals/0/files/publications/documents/M69LookInside.pdf?ver=2019-05-30-081545-910","name":"M69 Inland Desalination and\nConcentrate Management","authors":[{"id":"65d2ed6bebf7bb9388ffa64b","name":"American Water Works Association","slug":"american-water-works-association"}],"authorShowsEtAl":null,"edition":null,"publication":null,"date":null,"accessDate":null,"startPage":null,"volume":null,"footnoteNumber":208,"year":2019},{"slug":"WR-118-119-120-121","url":"https://doi.org/10.1016/j.desal.2017.10.033","name":"Energy use for membrane seawater desalination – current status and trends","authors":[{"id":"65d2ed6bebf7bb9388ffa76b","name":"N. Voutchkov","slug":"n-voutchkov"}],"authorShowsEtAl":null,"edition":null,"publication":"Desalination","date":"01/04/2018","accessDate":null,"startPage":2,"volume":431,"footnoteNumber":118,"year":2018},{"slug":"WR-210","url":"https://doi.org/10.1016/j.desal.2020.114633","name":"The global status of desalination: An assessment of current desalination technologies, plants and capacity","authors":[{"id":"65d2ed6bebf7bb9388ffa6f7","name":"J. Eke","slug":"j-eke"},{"id":"65d2ed6bebf7bb9388ffa648","name":"A. Yusuf","slug":"a-yusuf"},{"id":"65d2ed6bebf7bb9388ffa62f","name":"A. Giwa","slug":"a-giwa"},{"id":"65d2ed6bebf7bb9388ffa644","name":"A. Sodiq","slug":"a-sodiq"}],"authorShowsEtAl":null,"edition":null,"publication":"Desalination","date":"01/12/2020","accessDate":null,"startPage":4,"volume":495,"footnoteNumber":210,"year":2020},{"slug":"WR-213","url":"https://www.cochilco.cl/Research/Consumo%20de%20agua%20en%20la%20mineria%20del%20cobre%20al%202017-INGLES.pdf","name":"Water consumption in the\ncopper mining industry, 2017, DEPP 04/2018","authors":[{"id":"65d2ed6bebf7bb9388ffa67f","name":"Comisión Chilena del Cobre","slug":"comision-chilena-del-cobre"}],"authorShowsEtAl":null,"edition":null,"publication":null,"date":"04/2018","accessDate":null,"startPage":null,"volume":null,"footnoteNumber":213,"year":2018},{"slug":"WR-216-219","url":"https://doi.org/10.1016/j.rser.2019.109609","name":"Renewable and Sustainable Energy Reviews\nPathways for integrated concentrated solar power - Desalination: A critical review","authors":[{"id":"65d2ed6bebf7bb9388ffa63c","name":"A. Omar","slug":"a-omar"},{"id":"65d2ed6bebf7bb9388ffa63a","name":"A. Nashed","slug":"a-nashed"},{"id":"65d2ed6bebf7bb9388ffa790","name":"Q. Li","slug":"q-li"},{"id":"65d2ed6bebf7bb9388ffa6bc","name":"G. Leslie","slug":"g-leslie"},{"id":"65d2ed6bebf7bb9388ffa792","name":"R. A. Taylor","slug":"r-a-taylor"}],"authorShowsEtAl":null,"edition":null,"publication":"Renewable and Sustainable Energy Reviews","date":"03/2020","accessDate":null,"startPage":109,"volume":119,"footnoteNumber":216,"year":2020},{"slug":"WR-220","url":"https://doi.org/10.1021/acs.iecr.9b02499","name":"Recovery of Water from Concentration of Copper Mining Effluents Using Direct Contact Membrane Distillation","authors":[{"id":"65d2ed6bebf7bb9388ffa80c","name":"Y. P. Jimenez","slug":"y-p-jimenez"},{"id":"65d2ed6bebf7bb9388ffa753","name":"M. Ulbricht","slug":"m-ulbricht"}],"authorShowsEtAl":null,"edition":"42","publication":"Industrial & Engineering Chemistry Research","date":"08/10/2019","accessDate":null,"startPage":19599,"volume":58,"footnoteNumber":220,"year":2019},{"slug":"WR-123-223-226-227","url":"https://doi.org/10.1080/08827508.2017.1389729","name":"The use of seawater in mining","authors":[{"id":"65d2ed6bebf7bb9388ffa725","name":"L. Cisternas","slug":"l-cisternas"},{"id":"65d2ed6bebf7bb9388ffa6a0","name":"E. Gálvez","slug":"e-galvez"}],"authorShowsEtAl":null,"edition":"1","publication":"Mineral Processing and Extractive Metallurgy Review ","date":"23/10/2017","accessDate":null,"startPage":18,"volume":39,"footnoteNumber":123,"year":2018},{"slug":"WR-224","url":"https://doi.org/10.1016/j.hydromet.2018.07.009","name":"Influence of seawater and discard brine on the dissolution of copper ore and copper concentrate","authors":[{"id":"65d2ed6bebf7bb9388ffa733","name":"L. Velásquez-Yévenes","slug":"l-velasquez-yevenes"},{"id":"65d2ed6bebf7bb9388ffa7f1","name":"V. Quezada-Reyes","slug":"v-quezada-reyes"}],"authorShowsEtAl":null,"edition":null,"publication":"Hydrometallurgy","date":"09/2018","accessDate":null,"startPage":88,"volume":180,"footnoteNumber":224,"year":2018},{"slug":"WR-229","url":"https://doi.org/10.1002/2017WR021402","name":"Learning Curve for Seawater Reverse Osmosis Desalination Plants: Capital Cost Trend of the Past, Present, and Future","authors":[{"id":"65d2ed6bebf7bb9388ffa7e5","name":"U. Caldera","slug":"u-caldera"},{"id":"65d2ed6bebf7bb9388ffa66b","name":"C. Breyer","slug":"c-breyer"}],"authorShowsEtAl":null,"edition":"10","publication":"Water Resources Research","date":"04/12/2017","accessDate":null,"startPage":538,"volume":53,"footnoteNumber":229,"year":2017},{"slug":"WR-203-230","url":"https://pure.iiasa.ac.at/id/eprint/15313/1/WP-18-006-c.pdf","name":"Multidimensional analysis of nexus\ntechnologies I: diffusion, scaling and cost\ntrends of desalination","authors":[{"id":"65d2ed6bebf7bb9388ffa65c","name":"B. Mayor","slug":"b-mayor"}],"authorShowsEtAl":null,"edition":null,"publication":"Working paper International Institute for Applied Systems Analysis, Laxenburg, Austria, WP-18-006","date":"04/06/2018","accessDate":null,"startPage":null,"volume":null,"footnoteNumber":203,"year":2018}],"pages":[],"people":[],"imageAssets":[{"id":"65d2ed9eebf7bb9388ffaebd","slug":"wr-81-17-2-fig-52","image":{"id":"image_copper-alliance/image-asset/wr-81-17-2-fig-52_image__WR-81-17.2-fig52_pysjsh.webp","url":"https://res.cloudinary.com/shapeable/image/upload/v1682075239/copper-alliance/image-asset/wr-81-17-2-fig-52_image__WR-81-17.2-fig52_pysjsh.webp.webp","url2x":null,"width":1800,"height":1757,"type":"image/webp"}}]},"banners":[{"id":"65d2ed72ebf7bb9388ffa96c","name":"Municipal desalination plant, Askelon, Israel","slug":"municipal-desalination-plant-askelon-israel","title":null,"description":{"id":"65d2ed72ebf7bb9388ffa96c_description","text":""},"alternateText":null,"image":{"id":"image_copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc","url":"https://res.cloudinary.com/shapeable/image/upload/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp","url2x":null,"width":1800,"height":1125,"type":"image/webp","thumbnails":{"halfBanner":{"url":"https://res.cloudinary.com/shapeable/image/upload/c_limit,w_780/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp","url2x":"https://res.cloudinary.com/shapeable/image/upload/c_limit,w_1560/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp"},"mainBanner":{"url":"https://res.cloudinary.com/shapeable/image/upload/c_limit,w_1440/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp","url2x":"https://res.cloudinary.com/shapeable/image/upload/c_limit,w_2880/v1692227908/copper-alliance/banner/municipal-desalination-plant-askelon-israel_image__WR-85-17.19.6-Page143_ixypjc.webp"}}}}]}}},"pageContext":{"lang":{"id":"en","path":"","iso":"en","name":"English","label":"English"},"availableEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend","OrganisationType","HorizonType","Economy","FeedEntry","Video","Citation","Objective","ProfileType","ExpertiseLevel"],"detailEntities":["Catalyst","CommodityGroup","Innovation","Organisation","Page","Person","Post","SubTopic","Topic","Trend"],"site":{"id":"65d2edd1ebf7bb9388ffb0df","slug":"connect-ore","name":"ConnectOre","url":"https://connectore.org","title":"ConnectOre","twitter":null,"threads":null,"facebook":null,"linkedin":null,"instagram":null,"flickr":null,"tiktok":null,"youtube":null,"ownerName":"ICAA","recaptchaKey":"6LfG2J0qAAAAAHDCFfJnrWOj6DiWJGik5BAa_7p8","googleSiteVerification":null,"platformName":"ConnectOre","platformUrl":"https://platform.connectore.org","supportEmail":null,"contactEmail":null,"mainMenu":{"id":"65d2edaaebf7bb9388ffaf79","slug":"website-navigation"},"linearMenu":null,"entityViews":[{"id":"67528c24c135ebcfc668f1ba_65d2edd1ebf7bb9388ffb0df","name":"Value Chain","hash":"value-chain","label":null,"slug":"value-chain","count":0,"showCount":null,"disabled":null,"icon":{"id":"6752a61b8b51dfa7b77b1e37","name":"Connections Navigator Icon Glyph","slug":"connections-navigator-icon-glyph","component":"ConnectionsNavigatorIconGlyph"},"childEntityTypes":[{"id":"6667fa4ff794dd6e045135c1","name":"Value Chain Theme","internalName":"Trend"},{"id":"6667fa58f794dd6e045135c6","name":"Topic","internalName":"Topic"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"6757ef1ede8adbd45cf19474_65d2edd1ebf7bb9388ffb0df","name":"Bulletin Board","hash":"bulletin-board","label":null,"slug":"bulletin-board","count":0,"showCount":null,"disabled":null,"icon":{"id":"681c2cebbccc5a72d8382f31","name":"Tag Icon","slug":"tag-icon","component":"TagDotIconGlyph"},"childEntityTypes":[],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528d88c135ebcfc668f31b_65d2edd1ebf7bb9388ffb0df","name":"Innovations","hash":"innovations","label":null,"slug":"innovations","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528d74c135ebcfc668f315","name":"Innovation","internalName":"innovation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67625640fbc7c50d8644c592_65d2edd1ebf7bb9388ffb0df","name":"Community","hash":"community","label":null,"slug":"community","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"67528404c135ebcfc668ee1c","name":"Person","internalName":"Person"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67528e1bc135ebcfc668f33a_65d2edd1ebf7bb9388ffb0df","name":"Stakeholder Map","hash":"stakeholder-map","label":null,"slug":"stakeholder-map","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"66680141f794dd6e0451367a","name":"Organisation","internalName":"Organisation"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]},{"id":"67529040c135ebcfc668f4ae_65d2edd1ebf7bb9388ffb0df","name":"References","hash":"references","label":null,"slug":"references","count":0,"showCount":null,"disabled":null,"icon":{"id":"67528cddc135ebcfc668f304","name":"Grid Icon Glyph","slug":"grid-icon-glyph","component":"GridIconGlyph"},"childEntityTypes":[{"id":"6752902fc135ebcfc668f4a4","name":"Article","internalName":"FeedEntry"},{"id":"67529039c135ebcfc668f4aa","name":"Citation","internalName":"Citation"},{"id":"67528de9c135ebcfc668f328","name":"Catalyst","internalName":"catalyst"},{"id":"67528df9c135ebcfc668f32d","name":"Page","internalName":"page"}],"type":{"id":"67528b63c135ebcfc668f19c","name":"Explorer","slug":"explorer"},"slices":[]}],"entityAppViews":[],"entityOnboardingViews":[{"id":"680c3a4ebc80e4d0f3cfa2ef_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Step","hash":"trend-expertise-step","label":null,"slug":"trend-expertise-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df","name":"Trend Expertise Onboarding Grid","slug":"trend-expertise-onboarding-grid","label":null,"updated":"2025-04-26T01:42:10.20","layout":{"id":"680c3993bc80e4d0f3cfa2dd","name":"Slice Onboarding Trend Expertise Grid","slug":"slice-onboarding-trend-expertise-grid","component":"SliceLayoutOnboardingTrendExpertiseGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":null,"titleRich":{"id":"680c39f2bc80e4d0f3cfa2e0_65d2edd1ebf7bb9388ffb0df_titleRich","text":"Are you **an industry expert** in any of these Value Chain Themes?"}}]},{"id":"680c3a85bc80e4d0f3cfa2fa_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Step","hash":"profile-types-step","label":null,"slug":"profile-types-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df","name":"Profile Types Onboarding Grid","slug":"profile-types-onboarding-grid","label":null,"updated":"2025-04-26T01:44:34.63","layout":{"id":"680c3a13bc80e4d0f3cfa2e4","name":"Slice Onboarding Profile Types Grid","slug":"slice-onboarding-profile-types-grid","component":"SliceLayoutOnboardingProfileTypesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"Which best describes you?","titleRich":{"id":"680c3a82bc80e4d0f3cfa2f7_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]},{"id":"680c3aaabc80e4d0f3cfa2ff_65d2edd1ebf7bb9388ffb0df","name":"Objectives Step","hash":"objectives-step","label":null,"slug":"objectives-step","count":0,"showCount":null,"icon":null,"childEntityTypes":[],"type":{"id":"680c394fbc80e4d0f3cfa2d8","name":"Onboarding","slug":"onboarding"},"slices":[{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df","name":"Objectives Onboarding Grid","slug":"objectives-onboarding-grid","label":null,"updated":"2025-04-26T01:45:12.76","layout":{"id":"680c3a3fbc80e4d0f3cfa2ea","name":"Slice Onboarding Objectives Grid","slug":"slice-onboarding-objectives-grid","component":"SliceLayoutOnboardingObjectivesGrid"},"connectedEntities":[],"headerFontType":null,"pretitle":null,"pretitleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_pretitleRich","text":""},"title":"What are your priority objectives?","titleRich":{"id":"680c3aa8bc80e4d0f3cfa2fc_65d2edd1ebf7bb9388ffb0df_titleRich","text":""}}]}],"gptLanguages":[{"id":"65d2eda5ebf7bb9388ffaf1f","name":"English","slug":"english","iso":"en","locale":"en_US","path":"/en","label":"English","menuLabel":null},{"id":"666f70b6e051ad9ef086d1be","name":"Arabic","slug":"arabic","iso":"ar","locale":"ar_AE","path":"/ar","label":"عربي","menuLabel":null},{"id":"666f7161e051ad9ef086d1c4","name":"Spanish","slug":"spanish","iso":"es","locale":"es_ES","path":"/es","label":"español","menuLabel":null},{"id":"666f71c9e051ad9ef086d1c8","name":"German","slug":"german","iso":"de","locale":"de_DE","path":"/de","label":"Deutsch","menuLabel":null},{"id":"65d2eda5ebf7bb9388ffaf20","name":"French","slug":"french","iso":"fr","locale":"fr_FR","path":"/fr","label":"Français","menuLabel":null}],"gptQuestionTemplate":{"id":"662c7f6e81ef1920e3638518","name":"Standard Open Question","slug":"standard-open-question","path":"/prompt-templates/standard-open-question","__typename":"PromptTemplate","_entityTypeName":null,"label":"CopperAI","type":{"id":"662c7f1981ef1920e363850f","name":"Ask","slug":"ask"},"description":{"text":"This template is tailored for providing accurate responses based on specific context. It integrates contextual details from \"contextual information\" and addresses the \"target question\". The response is always in English, prioritizing clarity. If the answer is unknown, the template openly acknowledges this, ensuring honesty and avoiding speculation. This format is ideal for precise, context-sensitive, and truthful answering."},"summary":{"text":"Ask a general question about Website content"},"gptModel":{"id":"67564c4f2f6749787d0e03dc","name":"OpenAI GPT 4o","slug":"open-ai-gpt-4-o","dataSetId":"openai:gpt-4o"},"variablesPrompt":{"text":""},"submitLabel":"Ask","languages":[],"icon":{"id":"67528b9cc135ebcfc668f1a3","name":"AI Lower Case Icon Glyph","slug":"ai-lower-case-icon-glyph","component":"AiLowerCaseIconGlyph"},"variables":[{"id":"6668076bf794dd6e045138d9","name":"question","slug":"question","useVectorStore":true,"label":"What would you like to know?","labelAnother":null,"help":{"text":""},"options":{"text":""},"defaultValue":null,"entityTypes":[],"controlType":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"},"labelContextual":null,"labelAnotherContextual":null,"helpContextual":{"text":""},"optionsContextual":{"text":""},"defaultValueContextual":null,"entityTypesContextual":[],"controlTypeContextual":{"id":"6667ff19f794dd6e04513656","name":"Textarea","slug":"textarea"}}]},"advertisements":[],"logoVerticalOffset":null,"logoHorizontalOffset":null,"logoVerticalOffsetMobile":null,"logoHorizontalOffsetMobile":null,"logoVerticalOffsetTablet":null,"logoHorizontalOffsetTablet":null,"logoVerticalOffsetDesktop":null,"logoHorizontalOffsetDesktop":null,"logoHeightMobile":44,"logoHeightTablet":null,"logoHeightDesktop":null,"headerHeightMobile":null,"headerHeightTablet":null,"headerHeightDesktop":null,"logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807465/copper-connect/site/copper-connect_logo__CopperOre_Master_Brand_Identity-colour_cd4vgg.webp","type":"image/webp","width":945,"height":266},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1738807452/copper-connect/site/copper-connect_logoInverted__CopperOre_Master_Brand_Identity-white_chnucx.webp","type":"image/webp","width":945,"height":266},"footerMenu":null,"footerSecondaryMenu":null,"footerContent":{"text":"© {year} ConnectOre. All Rights Reserved\n"},"creator":null,"poweredBy":{"id":"65d2edadebf7bb9388ffafc8","name":"Shapeable","slug":"shapeable","url":"https://shapeable.ai","logo":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1674010034/platform/organisation/shapeable_logo__shapeable.png","type":"image/png","width":1174,"height":368},"logoInverted":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1729474494/copper-connect/organisation/shapeable_logoInverted__shapeable-logo-inverted_sdcfpk.png","type":"image/png","width":392,"height":118},"logoSubtle":null},"poweredByLabel":null,"poweredByContent":{"text":""},"explorerPage":{"name":"Explorer","title":null,"slug":"explorer","path":"/explorer"},"termsPage":{"name":"Terms of Use","title":null,"slug":"terms-of-use","path":"/terms-of-use"},"homePage":null,"knowledgeHubPage":{"name":"News","title":null,"slug":"news","path":"/news"},"privacyPolicyPage":{"name":"Privacy Policy","title":null,"slug":"privacy-policy","path":"/privacy-policy"},"summary":{"text":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action"},"thumbnail":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"},"openGraph":{"title":"ConnectOre","date":"2026-07-31T04:44:47.80","description":{"plain":"A platform to accelerate industry-wide innovation through collective intelligence and collaborative action\n"},"image":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png","type":"image/png","thumbnails":{"full":{"url":"https://res.cloudinary.com/shapeable/image/upload/v1713942350/copper-connect/site/copper-connect_thumbnail__site-thumb_bmicl8.png"}}}},"termsAndConditions":{"text":""},"privacyPolicy":{"text":"At ConnectOre we respect your privacy. We want to ensure that you get the information, content, and experiences that matter most to you. ConnectOre is committed to protecting the privacy of its stakeholders, communities, and other contacts.\n\n## Scope\n\nThis privacy policy applies to all personal data processed by full-time and part-time employees, volunteers when acting on behalf of ConnectOre contractors and partners doing business on behalf of ConnectOre, as well as all legal entities, all operating locations in all countries, and all business processes conducted by ConnectOre.\n\n## Information Collected\n\n#### What information do we collect?\n\nConnectOre collects the following personal data in line with the use purposes explained in a subsequent section:\n\n  * Your name and contact details\n  * Online profile data/usage\n  * Contact information\n  * Social media profile information\n  * Education and professional information\n  * Registration and participation in ConnectOre events and activities \n  * Information about service usage\n  * Cookies\n  * Authentication data\n  * Location information\n  * Author and peer review information\n  * Other information you upload or provide to us\n\n#### How do we use your information?\n\nConnectOre uses (and, where specified, shares) your personal information for the following purposes:\n\n  * To provide support or other services. ConnectOre may use your personal information to provide you with support or other services that you have ordered or requested. ConnectOre may also use your personal information to respond directly to your requests for information, including registrations for webinars, or other specific requests, or pass your contact information to the appropriate ConnectOre supplier or reseller for further follow-up related to your interests.\n  * To provide information based on your needs and respond to your requests. ConnectOre may use your personal information to provide you with notices of new product releases and service developments.\n  * To administer products. ConnectOre may contact you if you make use of (digital) products we offer, to confirm certain information (for example, that you did not experience problems in a download process). We may also use this information to confirm compliance with licensing and other terms of use and may share it with your company/institution.\n  * To assist in your participation in ConnectOre activities. ConnectOre will communicate with you, if you are participating in certain ConnectOre activities such as ConnectOre Summit, authoring or reviewing a ConnectOre article, or ConnectOre humanitarian activities. ConnectOre may send you information such as update messages related to those activities (such as but not limited to the event's content, and event logistics)\n  * To update you on relevant ConnectOre events and opportunities. ConnectOre may communicate with you regarding relevant ConnectOre events and opportunities.\n  * To protect ConnectOre content and services. We may use your information to prevent potentially illegal activities and to enforce our terms and conditions.\n  * To get feedback or input from you. In order to deliver products and services of most interest to our stakeholders, from time to time, we may ask you to provide us input and feedback (for example through surveys).\n\n#### How can you control your information?\n\nYou can control the information we have about you and how we use as follows:\n\n  * If you are a registered guest for ConnectOre Annual Summit 2021, any request for review, revise or correction of your personal data can be sent to john.fennell@copper.com.au specifying your request.\n\n#### Personal data about minors and children\n\nConnectOre does not knowingly collect data from or about children under 16 without the permission of parent(s)/guardian(s). If we learn that we have collected personal information from a child under 16, we will delete that information as quickly as possible. If you believe that we might have any information from or about a child under age 16, please contact us.\n\n#### How will you know if the Privacy Policy is changed?\n\nConnectOre may update its Privacy Policy from time to time. If we make any material changes you will be notified by means of a notice on our website prior on the date the change becomes effective. We encourage you to periodically review this page for the latest information on our privacy practices.\n\n## Technical And Regulatory Information\n\n#### Logging practices\n\nConnectOre automatically records the Internet Protocol (IP) addresses of visitors. The IP address is a unique number assigned to every computer on the internet. Generally, an IP address changes each time you connect to the internet (it is a \"dynamic\" address). Note, however, that if you have a broadband connection, depending on your individual circumstance, the IP address that we collect may contain information that could be deemed identifiable. This is because, with some broadband connections, your IP address doesn't change (it is \"static\") and could be associated with your personal computer.\n\nAs well as recording the IP addresses of users, ConnectOre may also keep track of sites that users visited immediately prior to visiting ConnectOre's website and the search terms they used to find it. We keep track of the pages visited on ConnectOre's website, the amount of time spent on those pages and the types of searches done on them. Your searches remain confidential and anonymous. ConnectOre uses this information only for statistical purposes to find out which pages users find most useful and to improve the website.\nConnectOre also captures and stores information that you transmit. This may include:\n\n  * Browser/Device type/version\n  * Operating system used\n  * Media Access Control (MAC) address\n  * Date and time of the server request\n  * Volume of data transferred\n\n#### External links behaviour\n\nSome of the links on ConnectOre's websites link to other sites created and maintained by other public- and/or private-sector organizations. ConnectOre provides these links solely for your information and convenience. When you transfer to an outside website, you are leaving ConnectOre domain, and ConnectOre's information management policies no longer apply. ConnectOre encourages you to read the privacy statement of each external website that you visit before you provide any personal data.\n\n#### Cookies and web beacons\n\nCookies and web beacons are electronic placeholders that are placed on your device by websites to track your individual movements on that website over time. ConnectOre uses both session-based cookies (which last only for the duration of the user's session) and persistent cookies (which remain on your device and provide information about the session you are in and waits for the next time you use that site again).\n\nThese cookies and web beacons provide useful information to ConnectOre, enabling us to recognize repeat users, facilitate the user's access to and use of our sites, allows us to track usage behavior, and to balance the usage of our websites on all ConnectOre web servers.\nTracking cookies, third-party cookies, and other technologies such as web beacons may be used to process additional information, enable non-core functionalities on ConnectOre website and enable third-party functions (such as a social media \"share\" link). We may also include web beacons and other similar technology in promotional email messages to determine whether the messages have been opened.\n\n#### Do Not Track (DNT)\n\nThe online advertising industry has self-regulatory initiatives designed to provide consumers a choice in the types of ads they may see online and to conveniently opt-out from online behavioral ads served by some or all of the companies participating in these programs. Our websites do not respond to DNT consumer browser settings.\n\n#### Responses to legal requests\n\nConnectOre reserves the right to share your information to respond to duly authorized information requests of governmental authorities or where required by law.\n\n#### Your data rights\n\nConnectOre complies with all applicable data privacy laws and regulations including, but not limited to, the General Data Protection Regulation (GDPR) and the California Consumer Privacy Act (CCPA). Under these laws and regulations, you may have certain rights to your data. Should you wish to exercise any of these rights, please send an email request to john.fennell@copper.com.au with \"Data Privacy Request'' in the subject line and in the email please identify the specific privacy right you request assistance with. Please note additional information may be requested prior to fulfilling a request and that ConnectOre reserves the right to charge a fee, where permitted, to cover the cost of certain requests.\n\n#### How do I contact you if there is an issue?\nIf you have any questions or concerns about this Privacy Policy or about the use of your personal information, please feel free to contact us by email at john.fennell@copper.com.au"},"welcomeUrl":"https://connectore.org/app/welcome","welcomeTitle":"Welcome to ConnectOre and thanks for joining us! ","invitationAction":"join the ConnectOre community","setupCompletionMessage":null,"languages":[],"brandColors":[],"showLogin":true,"showShareMenu":null,"showFollowMenu":true,"showPlatformLogin":null,"showContactUs":null,"loginLabel":"Explorer Login","platformLoginLabel":"Community Platform","headerButtons":[]},"includeProfile":true,"disableProfileEditing":false,"dynamicEntityTypeNames":["Person","Organisation"],"profilePath":"/app/profile","welcomePath":"/app/welcome","id":"65d2edbfebf7bb9388ffb09b","slug":"desalination-detailed-technology-review","entityPath":"/posts/desalination-detailed-technology-review","openGraph":{},"entityTypeName":"Post","name":"Desalination Detailed Technology Review","updated":"2024-06-18T01:13:48.55","__type":"Post"}},
    "staticQueryHashes": ["1044227382","1158597448","1242646999","1427075558","1452322194","1520036161","1545705019","1586309863","1606754935","1816168740","1864381666","1903214493","1945056504","1989845544","2034981229","2181044613","2409034939","2463401854","2526615987","2642656775","2862279633","2867243664","2910164142","2912920178","296816903","3073584486","3150399266","3172506128","3320076387","3447680494","3453148481","3624873332","364221563","3692255024","3778988535","3782604890","4091857177","4216505212","591477963","701411134","758936535","80004486","857137463","881103158"]}